For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since trailer…
The actual weight of aluminum wheels versus steel wheels will depend on the design. For instance the Aluminum Sendel Series T02 Machined Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 #AM22654 will weigh 20 lbs and the Aluminum Lynx Trailer…
Yes you can upgrade the spring bars on your Blue Ox 2-Point Weight Distribution System to the Replacement Spring Bars for Blue Ox 2-Point Weight Distribution System #BLU64XR by simply swapping out your existing spring bars.
Yes, when the Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank - 10K GTW, 800 TW # BLU82XR gives a range of 600-800 pounds of tongue weight, you will be good to go if you have 700 pounds of tongue weight. Since your total tongue…
The Blue Ox 2-Point Weight Distribution System part #BLU82XR is an excellent cost effective, entry level weight distribution system with sway control properties. It has a 600-800 lb tongue weight rating and it comes with the hitch ball already…
Non-ducted AC units just blow the air out of the bottom part of the unit through the lower vent system. While the ducted style are what you would use in a motorhome with multiple ducts in the ceiling. The duct style is designed to match up with the…
Greystone does not offer a replacement circuit board for your 28" Greystone Model F2811FL fireplace, you would have to replace the entire unit all together. I have a solution for you, the Furrion RV Electric Fireplace with Crystals - 30"…
The MORryde StepAbove part #MR98RR would be the correct fit for your 2021 Micro Minnie that has a doorway width of 24 inches and a threshold height of 31 inches.
For the P series of range hoods the replacement motor is supposed to be the part #BVD0218-00. But based on what you said yours looks like you most likely need the part #BVD0278-00. The replacement switch would then be the part #BL0108-02.
Based on the information you have given me, you have a 3,500 lb axle that is 84" long (hub face to hub face) with a 70" spring center length. At this time we do not have any replacement axles that are 84" long, but I do have a…
