Videos
for Honda CR-V Owners
Help Articles
for Honda CR-V Owners
Expert Answers
for Honda CR-V Owners
The only parts you need to purchase to use your father's Falcon 2 Tow bar to flat tow your 2016 Jeep Wrangler 75th Anniversary is a baseplate, magnetic lights and and possibly a braking system and high low adapter. I recommend Roadmaster Base…
view full answer...Since the Delta Force SM99242 is not receiving power from the factory 12v outlet when your Jeep is off you'll need to install a 12 Volt Outlet Kit, 20 amps #RM-9332 that will run directly to the battery to power the unit. This is most likely the…
view full answer...The Draw-Tite trailer hitch receiver, part #75547, uses 4 hex bolts that are M10 X 1.25 X 30. However, you shouldn't tap the threads uness you absolutely have to as a last resort. I highly recommend cleaning them before tapping them. I've…
view full answer...I'd be happy to help! All of the hitches for your 2011 Honda CR-V weigh relatively the same when it comes to the different classes, and while the Class I hitches definitely weight lighter I recommend using a Class III hitch since they have a…
view full answer...I would certainly view the owners manual on the 2011 Honda CR-V to ensure the correct towing capacity. I wouldn't recommend towing a 16 foot Casita travel trailer weighing 2100-2385 pounds if the capacity turns out to be 1500 pounds which is what…
view full answer...The Curt #C23FR and etrailer Hitch #e89YR have the same design and specs. The main difference between the two is the powder coat finish. The Curt has a glossy finish while the etrailer hitch has a matte finish. The matte finish gives it more of an…
view full answer...Yes, I will be happy to tell you what you will need to flat tow your 2007 Honda CR-V behind your motorhome. There are 5 major components needed: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates I recommend…
view full answer...The closest option we have in size to the High Pointe EM925RWW is the High Pointe Standard RV Microwave #HP59ZR. This microwave is 19-1/8" wide x 11-1/2" tall x 14-13/16" deep. The trim kit that comes with these units is approximately…
view full answer...The SuperSprings Coil Spring Inserts, #CSS-1125 and #CSS-1125R, are the same exact part and both will fit your 2011 Honda CR-V EX-L. The actual part number from SuperSprings is CSS-1125, but we put an R or an F on the end of the part numbers for…
view full answer...I have a solution for you, but from what I was able to find out the old Wesbar lights on your trailer cannot have the bulbs replaced on them because of the clear plastic cover and red gasket you mentioned in your email. You will be able to use the…
view full answer...The Wesbar light that the replacement lens #102641 you were looking at fits has been discontinued. The company that bought Wesbar has been getting rid of a lot of their lights so it is unlikely you will find it. However, the Optronics Combination…
view full answer...The older generations of the Wesbar submersible low-profile lights came with sealed light bulb capsules that are not replaceable like what you have in the picture you uploaded. Your best option is to replace the lights with new lights like part…
view full answer...