The Yakima FullBack 2-Bike Rack, part #Y02634, has several adjustable locking dials that you can use to modify the height and angle of the rack. By turning these and moving the individual arms up and down, you can adjust the height and angle of the…
I looked up the towing capacity of your 2005 Toyota Camry and found it to be 2,000 lbs. So as long as your trailer would weigh less than that when loaded you'd be good with the Draw Tite hitch part #36336 installed. Then for trailer wiring…
The Draw-Tite Trailer Hitch Receiver part #36336 is a confirmed fit for 1992 - 2006 Toyota Camry and what I recommend using. It has a class I rating with 1-1/4" opening. It's rated up to 3,500 lb for gross trailer and 300 lbs for tongue.
The only hitch receivers we have as a confirmed fit for your 2005 Toyota Camry are both Class II 1-1/4 inch hitch receivers. Unfortunately there is not a confirmed fit 2 inch receiver for your vehicle. We currently have two options for your Camry. We…
I am not aware of any legally mandated minimum ground clearance requirement for trailer hitch receivers in any states and my online research did not reveal any such laws. However, I did find on an internet forum for Sienna owners posts related to…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
The Yakima DoubleDown bike rack comes with a hitch bolt when tightened should help with the play between the bike rack shank and the inside of the hitch receiver. The Yakima Double Down Bike Rack has a unique thread pattern so I will not be able to…
While grade 8 bolts like you have are recommended to install a class 3 trailer hitch, I do not recommend using the bolts in your picture. For a trailer hitch like the Curt #14001 you were looking at, it uses 1/2" x 13 grade 8 bolts. Hitch…
The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 is a confirmed fit for your 2008 Scion tC. To install: 1) Locate cartridge hole on the engine block. 2) Clean cartridge hole of all debris. Use…
According to manufacturer's application guide your 2018 Toyota RAV4 LE with a 2.5L 4-cylinder engine would need the Kat's Heaters Custom Fit Engine Block Heater #KH11813 and it would need to be installed in the 'RL' position in the…
The Thule Roof-Rack Fit Kit for Traverse Foot Packs - 1261 #THKIT1261 is a confirmed fit for both the 2002 Toyota Camry and the 2005 Toyota Camry models. It is designed to work with Rapid Traverse #TH480R foot packs. Then you will use either aero…
