Custom Fit 2000 Ford Ranger Accessories

The Tow Ready 2 inch Hitch Ball #19258 includes a 1-1/8 inch nut. I just went out to our warehouse to check. It sounds like it'll work great for you.

I did some checking and it looks like your 2018 Toyota Highlander Limited has a towing capacity of 5,000 lbs so a 1,900 lb trailer wouldn't be a problem at all. Since your vehicle has the towing package you most likely have trailer wiring…

I recommend installing our etrailer Trailer Hitch Receiver #e29AR on your 2008 Ford Ranger 4x4 with the 4.0L 6 cylinder engine. The frame mounted receiver may require the drilling of 2 additional holes as Ford did not drill these holes in every Ford…

Yes, it will. The etrailer Hitch item #e29AR will allow you to store a full sized spare tire beneath your 2005 Ford Ranger. This hitch is custom fit and bolts to your Ranger with included hardware.

The correct Dexter brake assembly for you is the part #23-27. This is a 3,500 lb Dexter assembly that measures 10 x 2-1/4 inches.

I have spoken with one of my contacts at Bestop, who confirm that the EZ Fold Tonneau Cover you referenced, part #B1612501 is indeed a fit for your 2001 Ford Ranger pickup with the 6 foot Flairside (which is the Ford term for stepside) bed. To see…

I attached a wiring diagram for the Solera Power Awning Switch Kit #LC285500 for you to check out.

The correct valve stems to be used with your Americana Steel Wheel #AM20134 is the part #AM20903. The Kenda K353 Bias Trailer Tire #AM10068 would be a great choice for a tire for that wheel as well. I attached an FAQ article on trailer tires for you…

Although the Dexstar Steel Mini Mod Trailer Wheel #AM20315 has a e-coat primer and black powder coat finish, this is option is much more prone to rust over an aluminum or galvanized rim. The powder coat finish is mainly for common trailer use so it…

The pilot diameter on a wheel, like the one with part #AM30620, is the diameter of the bigger hole that is directly in the middle of the wheel. The pilot hole diameter of the wheel for the part I just measured is 2.84". I have attached a picture…

There isn't a set amount of torque that you need to tighten the nut of the Americana Metal, Bolt-In Valve Stem #AM20906 basically you'll want to watch the rubber grommet on the inside of the wheel as you tighten it and once it's nice and…

All of our tire and wheel packages come to us mounted by the manufacturer. If you would like to use a Metal Valve Stem #AM20906 you can take the wheel and tire to a tire service center and have the valve stems changed out or it can be done at home as…