Review of Trimax Locks Trailer Hitch Lock - Hitch Receiver Lock Class V - TMX96SR Video

No, I am sorry Don. The Gen-Y Torsion Weight Distribution Shank - 2-1/2" Hitches item #GY92NR does not fit the B&W Continuum Weight Distribution System item #BW78FR. The shank on the Continuum is quite a bit wider than the standard size on a…

The ball size of the 7" Monitor for Furrion Vision S Wireless RV Camera System part #FR47FR is about .85". I can't confirm fit of a Ram Mount as we don't carry them but if you can find one with this size ball it will work. The other…

A Gen-Y Torsion ball mount like #325-GH-1024 can be used with a Curt MV weight distribution system. You will put the weight distribution system shank in one of the stacked receivers and that will give you a smooth ride and still give you the…

I may have a solution for you, but when it comes to a system that records and stores video, yet also acts as an observation system, we do not have one available that fits that bill. With that said, the Furrion #FOS05TASF can be used as an observation…

That's an excellent question, and the answer is there isn't a hard-and-fast number that means a weight distribution hitch is required. The best way to assess this is if the sag is noticeable, either visually or when towing. You really want to…

On the top panel of the Furrion Transfer Switch #F50ATS is a diagram that shows how it will wire to your Weekend Warrior. I also attached a second picture that shows what's underneath the lid.

Yes the Furrion Vision S Wireless RV Observation Camera Systems like part #FCE48TASL-05 and the TST TPMS for RVs part #TST-507-RV-4-C are perfectly compatible and will not interfere with each other. While they do both use wireless systems but use…

That is definitely a feature which worries me about the B&W Continuum Weight Distribution System #BW78FR. While there is not a specific measurement I can give you as the bars move up and down depending on the load placed on the bars, B&W…

Yes, there is. It is the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit item #BWGNRK1320. This hitch has been recently confirmed to fit the 2025 Ram 2500s. There was some concern about the exhaust being changed from…

I would recommend to use the treated torx screws for ACQ (Alkaline Copper Quaternary) treated wood for better corrosion and rust resistance. The treated torx screws like the Redline 2-1/2 Inch Long Torx Trailer Screw for ACQ Treated Wood, part…

Hey Mark, yes you can use the etrailer anti rattle device part #e38FV when towing a travel trailer. It will hold the ball mount that is being used tight to the hitch to eliminate any movement. What travel trailer do you have?

It is actually not all that difficult to install or remove the Let's Go Aero anti-rattle hitch pin #SHP2082. In most cases you can reach in with a finger and pull out the spring and block portion. Otherwise a screwdriver would have short work of…