Ultimate Overview of the Combination LED Trailer Tail Light Video

If the running lights on your right (or passenger) side are working, but they are working for the other side then this indicates that you either have a short, some damaged wiring, or your running light (or just the bulb) on the left side needs to be…

Left side tail lights have a clear lens on the bottom to light up the license plate. Right hand side tail lights do not. If you were to use the right hand side light, #STL8RB, you would need a separate light to illuminate the license plate. The left…

The Combination LED Trailer Tail Light - Submersible - 7 Function - 14 Diodes - Driver Side #STL9RGB and #STL8RGB for the passenger side will work well for you. When installing the light you can ground your current wire to the mounting hardware post…

The Peterson LED Clearance lamp you're asking about, part #M215A features a sealed LED and circuit board, so it is considered submersible and could indeed be used on your boat trailer.

The mounting studs on the lights included with trailer tail light kit #TL5RK are 2 inches apart on center. I have linked a video showing an example installation of this kit for you.

If you are looking at and LED Trailer Tail Light like part #STL8RB, then you will not need a converter to make it compatible with the 4-Way Wiring Harness on your truck. You will need to figure out the wiring on your trailer to make sure that you get…

Lights like the LED Clearance or Side Marker Trailer Light w/ Reflector #MCL0032RBB are more or less universal so as long as the light you're wanting to replace on your 2019 Heartland Landmark Newport 5th Wheel measures 2" x 4" overall…

A lot of trailer lights have 3 wires. One wire for running lights, one wire for turn signal and brake lights, and one wire for ground. Check the back of the light assemblies because it might indicate the functions of the wires. Other lights may only…

I did some checking and for Sealed, Mini LED Side Marker, Clearance or Identification Light #MCL13A2B the mounting holes are spaced 2 inches apart on center. I have linked a video featuring this light for you.

The Optronics LED Combination Trailer Tail Lights #TLL160RK will replace your tail lights for LED on your Heritage trailer. If you are able to remove the clearance lights from their bases we have the following Amber/Red lights below. Thinline LED…

The Optronics LED Submersible Multifunction Trailer Light #STL8RB that you referenced is a right-hand light and does not include the clear down-facing lens for illuminating your license plate. However, the matching left-hand light from Optronics,…

The Replacement Hardware Kit #CE11452-A will hold on your Fulton Boat Guide #FGB1500100. I have included an image of this setup sent in reviewing the product.