Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets with the existing body mount bolts
Tech Tip:
Nerf Bars will not fit Z71 models or Hybrid models.
More Information >Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets with the existing body mount bolts
Tech Tip:
Nerf Bars will not fit Z71 models or Hybrid models.
More Information >Tube Step Specs:
Features:
These straight-style step bars give your vehicle a rugged look. 5-1/2" Wide step pads have stamped-grid tread design for excellent traction. All-aluminum construction with chrome powder coat finish. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long.…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...It sounds like the 2022 Chevy Silverado 3500 you are getting has the short bed. In that case, yes, you definitely want the sliding 5th wheel hitch for clearance. The good news is you will not need to purchase the entire…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...