Tube Step Specs:
Features:
With a glossy black powder coat and curved ends, these 3" diameter, steel step bars will give your vehicle a streamlined look. Non-slip plastic tread pads align with the doors of your truck to provide stable footing as you step in and out.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant powder coated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the vehicle frame
More Information >Tube Step Specs:
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets with the existing body mount bolts
More Information >Tube Step Specs:
Features:
These 3" wide steps protect your vehicle's rocker panels and provide easy entry and exit. Flat-profile steps ride high to maintain ground clearance. No-drill installation with included hardware. Carbon steel with textured black powder coat.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These 2" round bars have drop-down hoop steps that line up with the doors of your vehicle for easy exit and entry. 3" Wide, non-slip step pads offer grip, and sturdy black powder coated steel resists rust. No-drill installation.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
...to assist your entry and exit Tread pattern prevents your feet from slipping Polished stainless steel is durable and rustproof Quick and easy bolt-on installation No drilling required Mounting hardware...
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
...span>stainless steel is rustproof Custom installation with included mounting kit - no drilling required Specs: Tubing diameter: 3" Step pad quantity: 1 per bar Quantity: 2 nerf bars Limited lifetime warra...
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, round nerf bars have wide, non-slip step pads that help you easily enter and exit your vehicle. Constructed of carbon steel with a black powder coat finish to resist chipping, peeling, and fading. Custom installation with mounting kit.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
...span>Stainless steel tubing with polished finish is long-lasting and rustproof Quick and easy bolt-on installation No drilling required Powder coated mild steel brackets and hardware included Specs: Tubing...
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the vehicle frame
More Information >Tube Step Specs:
Features:
With a textured black powder coat and curved ends, these 3" diameter, steel step bars will give your vehicle a streamlined look. Non-slip plastic tread pads align with the doors of your Jeep to provide stable footing as you step in and out.
Installation Notes:
No drilling required for installation
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...It sounds like the 2022 Chevy Silverado 3500 you are getting has the short bed. In that case, yes, you definitely want the sliding 5th wheel hitch for clearance. The good news is you will not need to purchase the entire…
view full answer...Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…
view full answer...Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't…
view full answer...Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...