Filter By Toolbox Application
Vehicle Style: 6-1/2 Foot Bed - excluding Stepside Change
Truck Tool Box Specs:
Features:
69-1/2" Long x 13" wide x 10-1/4" deep; 3.5 cubic feet; 2" height above bed rails; narrow box with foam filled lid and paddle lift handles; low-profile top; aluminum construction
More Information >Truck Tool Box Specs:
Features:
60" Long x 12-3/4" wide x 11-1/8" tall. Side-mount-style tool box for out-of-the-way storage; Brite-Tread aluminum; locking paddle handles; crowned lid with full-pan support. Sits 6" above truck-bed rails.
More Information >Truck Tool Box Specs:
Features:
48" Long x 12-3/4" wide x 11-1/8" tall. Side-mount-style tool box for out-of-the-way storage; Brite-Tread aluminum; locking paddle handle; crowned lid with full-pan support. Sits 6" above truck-bed rails.
More Information >Truck Tool Box Specs:
Features:
68" Long x 12-3/4" wide x 11-1/8" tall. Side-mount-style tool box for out-of-the-way storage; Brite-Tread aluminum; locking paddle handles; crowned lid with full-pan support. Sits 6" above truck-bed rails.
More Information >Truck Tool Box Specs:
Features:
58-7/8" Long x 18-3/4" wide x 11-1/8" deep; 6 cubic feet; fifth wheel box with foam filled lid and paddle lift handles; aluminum construction
More Information >Videos
for Truck Tool Box
Help Articles
for Truck Tool Box
Expert Answers
for Truck Tool Box
Hey John, so the correct amount of spring bar tension will be based on the…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length…
view full answer...The UWS tool box part #UWS01039 that you referenced is made from 13 gauge aluminum which is .090 of an inch thick.
view full answer...I got some information from Yakima and included a diagram of the EXO SwingBase #Y34VR, which is the base part for the EXO SwingBase 2 Tier #Y82VR. Though the measurement from the pin hole to the closest edge of the carrier is not included in said…
view full answer...The UWS A-Frame Trailer Toolbox #UWS01039 measures…
view full answer...I can help you find the right assemblies, but I do not know exactly which ones you have on your trailer. To pick out the correct brake assemblies for your trailer you need to know a few things. You will want to measure the inner diameter of your…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.
view full answer...The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible.…
view full answer...The OEM prep package consists of 4…
view full answer...We definitely have an option to get a tonneau cover working with the UWS UWS Truck Bed Toolbox #UWS00030 once installed on your 2022 Ford F-350 long bed. With that said, the Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A61409 is specifically…
view full answer...