2025 Jeep Wrangler Jeep Spare Tire Carriers

This side mount roller's wheel is 1" lower than the mounting flange. I have attached a dimensioned picture.

In order to fit your Yakima BackRoad (8002702) with your spare tire on the Roadmaster Spare Tire Carrier #RM-195125, you'll need to use the Yakima StraightShot Hitch Extension #Y69VR. The StraightShot moves the center of the hitch pin hole out…

If you're looking to transport a canoe or kayak with your 2021 Airstream Interstate Nineteen Motorhome, then you have two options. The first is to use a roof rack system. Unfortunately, your motorhome does not have a custom fit roof rack, so…

As long as you don't exceed the maximum tongue weight capacity of the hitch or the vehicle, whichever is lower you should be fine, but I'd consider adding a transmission cooler. You'll also want to do everything you can do to keep that…

The Yakima HitchSki Snowboard and Ski Carrier #Y02418 that you referenced is just an adapter that will install on a Yakima hanging bike rack to allow it to carry skis/snowboards. You would first need a bike rack made by Yakima to use this. For a bike…

Yep, the HitchSki and RidgeBack bike rack absolutely work together and will do so very smoothly. So you just need the following part numbers: - Yakima HitchSki Snowboard and Ski Carrier for Hitch Bike Racks - 6 Pairs of Skis or 4 Boards #Y02418 -…

The 295/70R17 tire is 33.5" diameter. for a basic white spare tire cover, we have the Camco Vinyl Spare Tire Cover - 34" Diameter, #CAM45340. Or the Adco Spare Tire Cover - 34" Diameter, #290-1751. Please note the attached link below…

I am sorry Richard but no one, including Roadmaster, has a baseplate kit for the ZR2 Bison models of the 2024 Chevy Colorado. It has to do with the bumper.

For the Lippert Solera Power Awnings 672050 you will want the Solera Power Awning Drive Head Black item #LC273478. This is the replacement drive head. The Solera Power Awning Idler Head item #LC672052 is the replacement idler head.

The Westin PRO TRAXX Oval Nerf Bars - 4" - Polished Stainless Steel #21-23720 do come with the plastic bracket covers and they will look just as good as the pictures and attached video when they are clean on a sunny day. They will look like the…

Good question, and there is one significant difference between the Draw-Tite Max-Frame Trailer Hitch Receiver #DT93MR and the Curt Trailer Hitch Receiver #C76HR that fit your 2021 Ford Bronco Sport, and that is the installation. Due to how different…

If you can let me know what parts you need to replace I can look into it, otherwise the only solution I know that will take care of your problem is to replace the entire step assembly with part #LC3756271 which is a Kwikee 36 Series single step.