You've got a 4-flat on the vehicle and a 7-way on the trailer. No time to rewire. You grab this adapter, plug it in, and the built-in lights confirm the signals are live. Now you just need to load up and hit the road.Features to know about Quick Adapter with Signal Check This TowSmart ProClass adapter converts your 4-flat vehicle wiring to fit a 7-way trailerplug. It's a plug-and-play solution for light-duty towing. The built-in LED tester confirms that brake lights, taillights, and turn signals are active.
You're lining up the trailer in the driveway when you realize the plug doesn't match. No time to rewire. You grab the adapter, plug it in, and the lights fire up. ... Highlights 4-Way to 7-Blade Conversion: Adapts your vehicles 4-way flat to a 7-blade trailer connector. Plug-In Ready: No cutting or splicing needed. Built-In Wire Tester: Confirms function before towing. Weather-Resistant Housing: Helps protect against moisture and road grime.
You're wiring up a trailer and need to know it's done right. This 7-way plug lights up to show which signals are live the second you connect. You crimp it, test it, and roll out knowing everything works.Highlights 7-Blade Connector: Standard trailer-end plug for lights, brakes, and power. Built-In LED Tester: Confirms active signals during hookup. Screw Terminals: Accepts blunt-cut wires for easy install.
The trailer lights are flickering again. You've replaced bulbs, checked grounds, and still no luck. Time to swap the plug. This 4-way flat connector comes with a built-in tester and 24 inches of bonded wire. ... Highlights 4-Way Flat Plug: Standard trailer-end connector. 24" Bonded Wire Lead: 18-gauge wire for stop, turn, and taillights. Built-In Wire Tester: Lets you verify light function during install.
You're chasing a light issue with no clue if it's the truck or trailer. You plug in the tester, hit the blinkers, and the LEDs show what's live. No guesswork. Just answers before you waste an afternoon rewiring something that works.Features to know about Quick Test for 4-Flat Trailer Wiring This compact plug-in tester helps you verify that your tow vehicles 4-way flat connector is working correctly. Plug it in, activate the lights in the cab, and the built-in LEDs will light up to confirm power at each pin.
4-1/2" x 5-3/8" Square trailer tail light is submersible. Integrated LEDs indicate if there's a fault in your trailer wiring. For trailers less than 80" wide. ... Features: Trailer light serves 6 functions Stop light Tail light Turn signal Side marker Side reflex reflector Rear reflex reflector Built-in test lights let you troubleshoot Tail and stop/turn LEDs indicate if your trailer is receiving power Ground LED flashes to indicate a bad ground Submersible polypropylene construction is ideal for boat trailers Incandescent bulbs are easily replaceable Light accepts industry-standard 3-prong plug PL-3 pigtail harness included for trailers that don't have existing plug Surface mount with included studs Designed for trailers less than 80" wide DOT and SAE compliant Meets FMVSS 108 and CMVSS requirements Specs: Configuration: right hand (passenger's side) Dimensions: 4-1/2" tall x 5-3/8" wide x 2-9/16" deep Mounting studs: 2" apart on center Wire configuration: White: ground Red: stop/turn light Black: tail light Harness length: 10" 10-Year limited warranty Built-In LED Testers Verify Connection The Hopkins Smart Light makes it easy to diagnose faults in your trailer wiring.
Circuit testerplugs into your 4-way flat trailer wiring harness and identifies lighting problems. Labeled LED lights illuminate to show which functions are working properly.Features: Circuit testerplugs into your trailer's wiring harness to check the conductivity of all the circuits between your vehicle and your trailer Quickly identifies lighting problems Labeled LED lights indicate which functions are working properly Tail: tail lights LT: left turn signal and brakes RT: right turn signal and brakes
You're rewiring a trailer from scratch or cleaning up a mess of splices. This 7-way gives you a fresh cable, sealed jacket, and built-in test lights. You wire it once, plug it in, and know its good. ... Highlights 7-Blade Connector: Standard plug for trailer lights, brakes, and 12V power. LED Tester Built In: Lights confirm signal function during hookup. Jacketed Cable: Sealed 72" wiring harness protects against wear.
You are hooking up before an early start and want to be sure everything works. You plug in, glance at the LED indicators, and know right away your connection is solid. You pull away confident your signals will respond when you need them.Highlights 12-Inch Extension Loop: Adds reach between vehicle and trailer. 4-Way Flat Connectors: Plugs into standard vehicle and trailer ends. LED Connection Indicators: Red lights verify power and function.
Test, check, connect. The built-in LED tester and adapter work together so your trailer's ready when you are.Highlights Built-In LED Tester: Verifies wiring continuity at a glance. Plug-In Setup: Connects without wiring. Signal Ready: Supports brake, turn, taillight, and ground signals. 6 Round to 4 Flat: Adapts a 6 Round trailer to a 4 Flat.
... The LEDs light up to show your wiring is ready before you pull out with the trailer.LED Indicators: Lights show active brake, turn, and tail signals. Quick Check: Confirms proper wiring before towing. Simple Use: Plugs directly into vehicle connector. Compact Tool: Easy to store in glove box or toolbox.
You're hooking up the trailer and the lights are dead. Could be the truck, could be the plug. This harness tells you fast. Built-in LEDs show what's live, and the grip makes it easy to connect even with cold hands. ... Highlights 4-Way Flat Connector: Standard trailer-end wiring harness. Built-In LED Tester: Confirms active signals during hookup. Ergo Grip Handle: Makes connecting and disconnecting easier.
... The large grip ring provides the leverage you need to easily disconnect it from your trailer connector without damaging the terminals. Includes dust cover.Just plug the connector into the 4-way flat on your trailer. No separate circuit testers are needed. Activate each function on your vehicle and a red light will come on if power for that function is being sent by the vehicle-end connector to the trailer-end connector.
Adapter converts your 7-pole plug on the vehicle to a 6-pole plug to fit your trailer's connector.Features: Adapter converts your 7-pole plug on the vehicle to a 6-pole plug to fit your trailer's connector Function-testing LEDs provide built-in troubleshooting Center pin is set-up as electric brake, but can easily be changed to work with trailers that have the center pin wired as the hot lead To change functions, remove screws and switch black and blue wires Includes dust cover Please note: Locate wires and pin location by function only.
You're sorting out a trailer light issue and don't want to rip everything apart. This loop lets you test wiring fast. Plug it in, check the LEDs, and see what's working. ... Highlights 4-Way Flat Loop: Connects trailer and vehicle wiring or serves as a test lead. Built-In LED Tester: Lights indicate active circuits when plugged into vehicle. 12" Length: Short, flexible lead for testing or temporary wiring.
Converts from 6-pole round adapter on your vehicle down to 4-pole flat adapter. Also included, circuit tester and plug cover.Features: Converts from 6-pole round adapter on your vehicle down to 4-pole flat adapter Includes tester and cover If your truck has the connector on the left, and your trailer has the connector on the right, you will want this adapter.
This circuit testerplugs into the 5-way trailer connector on your vehicle. The bright LED lights indicate which functions (tail lights, brake lights, turn signals, and reverse lights) are working properly and which are not.Features: 5-Way connector testerplugs into your vehicle's wiring harness to confirm your lights are functioning Tests tail lights, brake lights, turn signals, and reverse lights Labeled LED lights indicate which functions are working properly Can be left attached to the circuit to continuously monitor the line between your vehicle and the trailer lighting systems Dust cover keeps connector clean when not in use
Test, plug in, go. The LED tester confirms your wiring, then you connect from 7 Blade to 4 Flat so every signal is ready before you tow.Highlights Built-In LED Tester: Verifies wiring continuity at a glance. 7 Blade to 4 Flat: Adapts vehicle socket to trailerplug. Plug-In Setup: Connects without wiring.
This Brophy electrical tester works for both 4- and 5- way flat trailer wiring harnesses.Features: Plugs into your trailer's wiring harness to check the conductivity of all the circuits between your vehicle and your trailer Quickly identifies lighting problems Can be left attached to the circuit to continuously monitor the line between your vehicle and the trailer lighting systems
This circuit testerplugs into the 7-way connector on your vehicle. LED lights indicate which functions (brake, turn, tail, stop, reverse, electric brakes, and 12V) are properly working. ... Features: 7-Way connector testerplugs into your vehicle's wiring harness to confirm your lights are functioning Tests tail lights, brake lights, turn signals, reverse lights, electric brakes, and auxiliary power Labeled LED lights indicate which functions are working properly Color-coded LEDs make it easy to distinguish each vehicle signal Integraded resistors are compatible with Smart Tow
The large grip ring on this universal, splice-in, 4-way flat connector provides the leverage you need to easily disconnect it from your trailer connector without damaging the terminals. Includes dust cover and 48" bonded wires.This Easy-Pull harness has a large grip ring designed to make disconnecting a snap. Simply slide your finger into the ring and pull the plug away from the opposite plug to disconnect. The Easy-Pull is also available as a trailer-end 4-way flat plug (sold separately). Combine the Easy-Pull vehicle-end plug and trailer-end plug for the easiest possible disconnection.
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Quick Tips: Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit. Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
This circuit testerplugs into the 7-way connector on your truck. LED lights indicate which functions (brake, turn, tail, stop, reverse and 12V) are properly working.Features: 7-way circuit tester 12V power Function Codes: BU: back up or reverse circuit center pole RT: right turn/brake TM: taillights LT: left turn/brake BK: brake controller output 12V: 12-volt power feed
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Quick Tips: Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit. Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
Filters
