... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Setting jacks on soft ground can cause them to sink and throw off your setup. These large jack pads spread the load over a wider surface, spreading the load across a wider surface so jack feet don't press into dirt or gravel.Multiple Pads for Full Setup: 4-pack covers multiple jack points during leveling. Plastic Construction for Ground Contact: Plastic build holds up under load when placed beneath stabilizers.
Small stabilizer feet can press into soft ground and shift your setup. These compact jack pads add a base under each jack, spreading the load so your stabilizers hold position.Highlights Supports Stabilizer Jacks on Soft Ground: Pads sit under jack feet to distribute weight across a wider area. Compact Size for Easy Placement: Smaller footprint fits tight spaces under stabilizers.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.The integrated SnapPad adds a wider rubber base that stays attached, giving you more footing on soft ground without dragging out extra blocks. How to Pick the Right Trailer Jack Capacity Your jack needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer weighs 10,000 lbs fully loaded, your tongue weight will typically be around 1,000 to 1,500 lbs.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.This issue is commonly tied to factory tow packages, including Ford Trailer Tow Package and Max Trailer Tow Package, while many base models do not have the same limitation. If you want to confirm your vehicle-side 7-way is working properly, see our help article: Testing a Vehicle Side 7-Way Trailer Connector for Proper Function .
Replace the bricks and blocks normally needed when positioning your trailer jack with this base pad. 7" Tall pad works as a jack stand to support your trailer tongue's weight during storage.Features: Base pad works as a jack stand to provide a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs Dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Quantity: 1 pad 2-Year warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 6 pads 2-Year warranty
Mount this durable poly plastic pad to your boat trailer's frame or axle to add a layer of protection between the frame or axle and your boat.Features: Poly plastic pad protects hull or keel of your boat Helps to absorb road shock if boat makes contact with it during trailering Mounting holes allow for simple installation onto crossmember - hardware not included Made in the USA Specs: Dimensions: 10" long x 1-1/2" wide Distance between mounting holes (center to center): 4-3/4" If your boat trailer has crossmembers or support frames that go from side to side, frame rail to frame rail, you can use one or more of these sturdy poly plastic pads to maximize protection of your boat's hull and keel during loading, transport and unloading.
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack the pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when stacked: 12-3/8" Quantity: 2 pads 2-Year warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 4 pads 2-Year warranty
Protect your boat keel during loading and launching with this 12" long marine trailer crossmember pad. Designed to fit 2" wide crossmembers, it provides a durable contact surface to help reduce wear on your hull.Features: Trailer frame pad helps protect your boat keel during launching and loading Designed to fit 2" wide trailer crossmembers Durable construction stands up to repeated marine use 12" length provides extended coverage across the crossmember Ideal for replacing a worn or damaged crossmember pad Specs: Overall length: 12" Overall width: 2" Quantity: 1 pad
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb swivel jack uses a drill adapter so the lift happens without the handle. It pivots up for clearance, and the SnapPad stays planted on soft ground.Specs Capacity and Lift: Maximum capacity: 2,000 lbs Maximum travel: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Mount Type: Swivel bolt-on Operation: Handle: sidewind, fold-down for power drill access Drill adapter: 3/4" integrated nut and 3/4" socket included Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drill operation Warranty: Limited lifetime SnapPad Jack Stand Pad: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs Warranty: 2-Year Included Components: etrailer Manual Sidewind Trailer Jack w/ Drill Adapter - A-Frame - 14" Lift - 2K Replacement Pad for SnapPad Jack Stand Pad System - 6 Round Jack Foot
Installs on the sides of your horse trailer to protect your horse's flanks from rubbing against the rough sides of the trailer. Constructed of durable black vinyl for mold and mildew resistance. ... Features: Installs on the sides of your horse trailer to protect your horse's flanks from rubbing against the rough sides of the trailer Constructed of durable black vinyl for mold and mildew resistance and easy cleaning Installation hardware not included Specs: Overall dimensions: 60" long x 9" wide x 2" thick Padded area dimensions: 58" long x 7" wide x 2" thick
Horse TrailerPads are used to provide maximum protection and comfort for the horse. The pads are 9" wide, filled with 2" foam and covered with durable black vinyl. 9" Wide 24" Long Cardboard backing
Installs on the sides of your horse trailer to protect your horse's flanks from rubbing against the rough sides of the trailer. Constructed of durable black vinyl for mold and mildew resistance. ... Features: Installs on the sides of your horse trailer to protect your horse's flanks from rubbing against the rough sides of the trailer Constructed of durable black vinyl for mold and mildew resistance Installation hardware not included Overall dimensions: 40" long x 9" wide
Horse TrailerPads are used to provide maximum protection and comfort for the horse. The pads are 9" wide, filled with 2" foam and covered with durable black vinyl. 9" Wide 12" Long Side Pad Cardboard backing
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.More Footing on Soft and Uneven Ground Unstable ground turns the front of the trailer into a balancing act when you're trying to park, load, or unhook. The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground.
This leveling system contains everything you need to stabilize your trailer or RV at home or the campsite. High-impact polyurethane resists damage and is treaded for maximum grip. Ramps, chocks, and jack pads nest together for compact storage.Features: Comprehensive kit easily levels your trailer or RV Includes 2 levelers, 2 wheel chocks, and 4 jack pads Compact levelers help your trailer stay flat on any surface Adjust to any height up to 4-1/2" Works with tires sizes up to 32" wide Ribbed bottom keeps ramps firmly in place on the ground Treaded surface grips your tire for added stability Heavy-duty wheel chocks keep your trailer from rolling when it's parked and leveled Drainage holes prevent water buildup from reducing traction Jack pads serve as stabilizing cushions so the leveling system won't sink into the ground Connectable design allows the system to nest together for compact storage High-impact polyurethane holds up under tremendous weight Resists scuffs and abrasions Specs: Quantity: 2 leveling ramps, 2 wheel chocks, and 4 jack pads Ramp dimensions: 16-9/16" long x 14-9/16" wide x 4-1/2" tall System weight: 9.9 lbs 1-Year warranty
Designed for travel trailers with BAL leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your travel trailer's BAL leveling to make leveling faster and easier Eliminates the need to crawl under your trailer to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your trailer Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: travel trailers with (4) 5-1/2" square jack feet Diameter: 8-1/8" Weight: 3 lbs per pad 2-Year limited warranty Simple, One-Time Installation SnapPads install quickly and easily, and never need to be removed.
... Includes 4 pads.You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Filters
