Rack'Em Enclosed Trailer equipment racks feature a hook design at the top of the rack that allows them to hang from the metal frame runner at the top of the side walls on the trailer for added strength.Features: Strategically spaced hooks hold rakes and other types of hand tools in your enclosed trailer Installs via pre-drilled holes to the wall of your enclosed trailer Has 2 sets of hooks on either end of the rack to hang hoses, extension cords, rope, or other things Helps prevent kinking due to closely spaced hooks Hooks have many uses: Hold cords, belts, tie downs and other things Can hold virtually anything that coils or has a loop on it Great for hardscaping "Hammered" finish will last years Includes 6 hooks Specs: Overall height from the top of the mounting brackets to the bottom of the hooks: 15" Overall length: 47-3/4"
This enclosed trailer equipment rack features a hook design at the top of the rack that allows it to hang from the trailer's metal frame runner. Hooks are predrilled so they may be screwed securely to the wall.Features: Enclosed trailer equipment rack securely holds your cargo Great for push brooms, hoses, cords, and more Hook design at the top of the rack allows the rack to hang from the metal frame runner at the top of the trailer's side walls Hooks are predrilled so they may be screwed securely to the wall Unique and durable "hammered" paint finish will last for many years Mounting hole diameter: 1/4"
This hanging rack lets you keep hardscaping tools neatly stored inside your enclosed trailer. Powder coated steel rack has cutouts to hold tools such as sledgehammers, chisels, tracers, and crowbars. ... The pin is attached to the rack with a twisted steel cable so you won't lose it. Circular Cutouts The rack has 5 circular cutouts to hold hand tools. Smaller holes hold narrow tools that can hang by the handle such as chisels and crowbars.
This hanging rack lets you keep hardscaping tools neatly stored inside your enclosed trailer. Powder coated steel rack has cutouts to hold tools such as tampers, hand tracers, and hammers. ... The pins are attached to the rack with twisted steel cables so you won't lose them. Circular Cutouts The rack has 2 circular cutouts to hold tools such as hammers and hand tracers.
Keep your tools organized and off the floor with this wall-mounted, 6-slot tool holder. This sturdy, powder coated steel rack can be installed in your garage, shop, or utility trailer for easy access to your rakes, shovels, and other handled tools.Features: Versatile rack holds up to 6 rakes, shovels, or other straight-handled tools Keeps your tools organized and off the floor Holds handles up to 2" in diameter Sturdy steel with black powder coat finish is durable and rust resistant Pre-drilled base lets you mount rack to the wall of your garage, shop, or utility trailer 1 Hole at each end of base Hardware not included Made in the USA Specs: Length: 33-1/2" Weight: 7.4 lbs Mounting hole diameter: 3/8" Limited 1-year warranty
... Multiple slots line the front of the bin for simple storage of screwdrivers or other small tools. Mount in your trailer, shop or garage for the ultimate in convenience.
Keep tools organized and off the floor with this 5-slot tool holder designed for your E track system. Sturdy, powder coated steel rack can be installed in your garage, shop, or trailer for easy access to your rakes, shovels, and other handled tools.Features: Versatile 5-slot tool holder lets you neatly secure up to 5 rakes, shovels, or other straight-handled tools Spring-loaded fittings snap into anchor slots on E track (sold separately) No drilling required Reposition anywhere along E track Black powder coat finish resists rust and corrosion Made in the USA 1-Year warranty
With this unique rack, you can keep your air tools stored and organized beside your air compressor for ultimate convenience. Slotted design makes it easy to hang equipment for quick retrieval.Features: Convenient rack lets you hang your pneumatic tools to keep them better organized Install holder next to your air compressor to keep equipment handy Sturdy, powder coated steel construction Limitless mounting options - install in your shop, garage or trailer Drilling required Hardware not included Specs: Dimensions: 17-1/2" long x 1-3/4" tall x 5-1/2" deep Weight: 5 lbs
Loose tools and small gear can pile up fast in a garage, RV, or shed. This snap-in tool holder keeps handled tools secure on the wall and adds a built-in hook for smaller items, helping you organize more in less space.Highlights Snap-In Grip For Handled Tools: Secures handles from 0.75" to 1" in diameter. Integrated Storage Hook: Adds a spot for cords, gloves, or small accessories.
This dual-arm hanger is perfect for storing multiple rakes, shovels, or other long-handled tools on your E track. Deep arms slope up to help prevent tools from falling out during transport. Keeps your trailer or garage organized.Features: Dual-armed hook lets you hang rakes, shovels, or other long-handled tools on your E track Deep, sloped arms help prevent tools from falling out during transport Spring-loaded fitting lets you easily move hook from one E track slot to another Vinyl coating helps prevent scratches and provides grip Zinc-plated steel is rust resistant Specs: Application: horizontal and vertical E-track and X-track Weight capacity: 200 lbs Dimensions: 8" deep x 4-3/8" wide x 3-5/8" tall 1-Year warranty
This tool holder for your E track is perfect for hanging a rake, shovel, or other long-handled tool. It's made of a rigid, yet flexible plastic that matches the contour of the handle, so your tool simply snaps in and out of the holder.Features: Tool holder for your E track lets you hang a rake, shovel, or other long-handled tool Curved shape matches the contour of your tool handle Spring-loaded fitting lets you easily move holder from one E track slot to another Rigid plastic holder flexes to allow tool to snap in Zinc-plated steel fitting is rust resistant Specs: Application: horizontal and vertical E track and X track Dimensions: 3" tall x 2-1/2" diameter x 2-1/4" deep Inner diameter: 1-5/8" Slot opening: 3/4" 1-Year warranty
This tool holder for your E track is perfect for hanging a rake, shovel, or other long-handled tool. It's made of a rigid, yet flexible plastic that matches the contour of the handle, so your tool simply snaps in and out of the holder.Features: Tool holder for your E track lets you hang a rake, shovel, or other long-handled tool Curved shape matches the contour of your tool handle Spring-loaded fitting lets you easily move holder from one E track slot to another Rigid plastic holder flexes to allow tool to snap in Zinc-plated steel fitting is rust resistant Specs: Application: horizontal and vertical E track and X track Dimensions: 3" tall x 2-1/2" diameter x 2-1/4" deep Inner diameter: 1-5/16" Slot opening: 3/4" 1-Year warranty
Mount this sturdy aluminum cabinet in your trailer, shop or garage to keep your tools organized. The top 2 shelves are lined with multiple slots for screwdrivers, wrenches or other small tools. And the folding tray provides a workspace.Features: Tool cabinet offers tons of convenient storage space Slip screwdrivers and wrenches into top slots Slide wire cutters, pliers and vice-grips into cutouts in middle shelf Lay larger tools on bottom shelf Folding tray provides a small workspace when down and acts as a cabinet door when folded up Sturdy, lightweight aluminum construction is machine finished Limitless mounting options - install in your shop, garage or trailer Pre-drilled keyhole slots and 8 included mounting buttons let you easily install and remove cabinet from wall Additional buttons (TWSP25BK - sold separately) can be mounted anywhere so that you can transfer cabinet from your trailer to your garage Specs: Overall dimensions: 30" tall x 25-3/4" wide x 4-3/4" deep Tray width: 25" Weight: 19 lbs This aluminum cabinet comes pre-drilled with keyhole-shaped slots that accept Tow-Rax 2.5-mm mounting buttons.
Round tool holder attaches to your E track and secures tools and supplies vertically. Ideal for holding shovels, brooms, and other similar equipment.Features: Round tool holder mounts to your E track and holds shovels, brooms, or a variety of other tools Vertical design allows you to store tools and equipment upright Spring-loaded lever allows for easy, secure installation in E track Durable steel construction Zinc plating resists corrosion Specs: Inner diameter: 2" Length: 2" Limited 1-year warranty
This tool holder lets you secure a weed whacker, hedge trimmer or long-handled tool to the E track or X track in your enclosed trailer or workshop. ... Features: Tool holder let you hang items horizontally in your enclosed trailer or workshop Secures a weed whacker, pole saw, hedge trimmer or other large, long-handled tool Spring-loaded clamps let you quickly access your tools Easy installation - just snap spring-loaded fitting into E track or X track anchor points Clamps can be adjusted along E track or X track to accommodate tool length Heavy-duty steel construction with corrosion-resistant zinc finish Specs: Dimensions (each): 5-3/4" tall x 2" wide x 8-5/8" deep Weight capacity: 200 lbs Weight (each): 5.3 lbs 1-Year limited warranty
This tool holder for E track and X track lets you store hammers, screwdrivers, wrenches, and other common hand tools in your enclosed trailer or garage. ... Features: Tool holder provides space-saving storage for small hand tools Built-in slots store hammers, screwdrivers, wrenches, and other common tools Easy installation - just snap spring-loaded fitting into E track or X track anchor points Holder can be easily repositioned along the E track Rugged, 1/8" steel construction with yellow zinc finish is corrosion resistant Specs: Dimensions: 12" long x 5-1/4" deep x 3" tall Weight: 3.42 1-Year limited warranty
This holder lets you hang tools and other items from the E track or X track in your enclosed trailer or workshop. Curved shape lets you easily snap in a shovel, broom or other long-handled tool. ... Features: Holder lets you hang tools on the wall of your enclosed trailer or workshop Curved shape makes it easy to snap in a shovel, broom or other long-handled tool Easy installation - just snap spring-loaded fitting into E track or X track anchor points Stabilizer can be easily moved from one E track or X track slot to another Heavy-duty polyurethane construction is strong and durable Specs: Dimensions: 3" tall x 2-1/2" diameter x 2-1/4" deep Inner diameter: 1-1/2" Slot opening: 7/8" 1-Year limited warranty
This extended flat hook lets you hang multiple rakes, shovels or other long-handled tools from the E track or X track in your enclosed trailer or workshop. Dual arms offer stability for heavy gear. Easy to reposition between track slots.Features: Extended dual-arm tool hook lets you can hang gear inside your enclosed trailer or on your workshop wall Perfect for hanging multiple rakes, shovels, and other long-handled tools Can be used with CargoSmart track bungee or tool stabilizer (sold separately) for extra security Dual arms offer stability for heavy items Easy installation - just snap spring-loaded fitting into E track or X track anchor points Hook can be easily moved from one E track or X track slot to another Zinc-plated steel construction is strong and durable Specs: Weight capacity: 200 lbs Dimensions: 8" deep x 4-3/8" wide x 3-5/8" tall 1-Year limited warranty
Leaning tools can clutter your garage, RV, or closet, and fall over easily. This snap-in tool holder keeps handled tools securely mounted to the wall, helping you organize your space and keep floors clear.Keeps Tools Off The Floor: Organizes brooms, rakes, and similar tools neatly. Wall-Mount Design: Frees up garage, shed, or utility room space.
This dual-arm hook with rubber-dipped ends lets you hang brooms, rakes, tool bags, and other equipment from the E track or X track in your enclosed trailer or workshop. Easy to reposition between track slots.Features: Dual-arm hook lets you can hang cargo inside your trailer or on your workshop wall Perfect for hanging brooms, rakes, tool bags, and other equipment Raised front lips prevent items from sliding off Dual arms offer greater stability for heavy items Non-marring rubber coating protects cargo from scratches Easy installation - just snap spring-loaded fitting into E track or X track anchor points Hook can be easily moved from one E track or X track slot to another Zinc-plated steel construction is strong and durable Specs: Weight capacity: 200 lbs Dimensions: Outer width: 4-5/8" Inner width: 3-3/4" Usable depth: 3-1/4" Weight: 0.85 lbs 1-Year limited warranty
Keep your rigging gear organized and close at hand with this tool holder. It has spaces provided for knives, pliers, Boga grips, snips, lures, and hooks. 4-1/2" Vacuum cup attaches to most vertical, non-porous surfaces and removes in seconds.Features: Tool holder keeps rigging gear organized Holds knives, pliers, Boga grips, snips, lures, hooks, and more 4-1/2" Pump-action vacuum cup mounts to most non-porous vertical surfaces Attach or remove in seconds Rigid plastic material is lightweight and durable Vacuum cup mounts to metal, glass, or fiberglass in seconds - simply pump plunger Orange indicator on plunger lets you know when the vacuum cup is secure Waterproof lubricant (sold separately) helps prevent plunger from sticking Black color Made in the USA Specs: Pull rating : 120 lbs Limited lifetime warranty
Square holder attaches to your E track and secures tools and supplies horizontally. Ideal for holding tubing and other long equipment or supplies that may be too tall for a vertical holder.Features: Square holder mounts to your E track and holds tubing, tools, or a variety of other supplies Horizontal design is great for equipment that's too long to be mounted vertically Multiple holders may be necessary to secure extra-long equipment Spring-loaded lever allows for easy, secure installation in E track Durable steel construction Zinc plating resists corrosion Made in the USA Specs: Holder dimensions: 4" long x 4" wide Limited 1-year warranty
This flat hook lets you hang a rake, shovel or other long-handled tool from the E track or X track in your enclosed trailer or workshop. Dual arms offer stability for heavy gear. Easy to reposition between track slots.Features: Dual-arm tool hook lets you can hang gear inside your enclosed trailer or on your workshop wall Perfect for hanging rakes, shovels, and other long-handled tools Can be used with CargoSmart track bungee or tool stabilizer (sold separately) for extra security Dual arms offer stability for heavy items Easy installation - just snap spring-loaded fitting into E track or X track anchor points Hook can be easily moved from one E track or X track slot to another Zinc-plated steel construction is strong and durable Specs: Weight capacity: 200 lbs Dimensions: 5-5/8" deep x 5" wide x 3-1/4" tall Weight: 1.5 lbs 1-Year limited warranty
This dual-arm hanger is perfect for storing multiple rakes, shovels, or other long-handled tools on your E track. Deep arms slope up to help prevent tools from falling out during transport. Keep your trailer or garage organized.Features: Dual-armed hook lets you hang rakes, shovels, or other long-handled tools on your E track Deep, sloped arms help prevent tools from falling out during transport Spring-loaded fitting lets you easily move hook from one E track slot to another Zinc-plated rolled steel is rust resistant Specs: Application: Fits all E-track systems Weight capacity: NOT load rated 90-day limited warranty
Filters
