Replaces 1 of the plastic thrustwashers needed to rebuild your Dutton-Lainson Easy Swivel 1,000-lb sidewind jack (DL22560).Features: Replaces a plastic thrustwasher needed to rebuild your Dutton-Lainson Easy Swivel 1,000-lb sidewind jack (DL22560) Includes 1 plastic thrustwasher 207356 Replacement Plastic ThrustWasher for Dutton-Lainson Trailer Jacks - Qty 1
Replaces the flat washers and plastic thrustwasher needed to rebuild your Dutton-Lainson Easy Swivel, 1,000-lb, sidewind jack (DL22560).Features: Replaces the flat washers and plastic thrustwasher needed to re-build your Dutton-Lainson Easy Swivel, 1,000-lb, sidewind jack(DL22560) For a complete rebuild on your jack you will also need the replacement miter kit (DL22437 - sold separately) Kit includes 2 hardened flat washers and 1 plastic thrustwasher 207356 Replacement Plastic ThrustWasher for Dutton-Lainson Trailer Jacks - Qty 1 207357 Replacement Hardened Flat Washer for Dutton-Lainson Trailer Jacks - Qty 1
Replace a worn thrust bearing in your Dutton-Lainson jack to restore smooth cranking and reduce binding under load. Fits select Dutton-Lainson jacks. Measures 0.525" to 0.535" inner diameter and 1.248" to 1.257" outer diameter.Features: Replaces the thrust bearing inside your Dutton-Lainson jack so it turns smoothly under load Helps reduce grinding, binding, and uneven wear caused by a damaged or missing bearing Specs: Inner diameter: 0.525" to 0.535" Outer diameter: 1.248" to 1.257"
From off-road rigs to field-worn axles, the Timken 2785 bearing cone keeps motion smooth under pressure. It handles radial and thrust loads with precision so heavy systems stay moving and components stay aligned.Features: Single cone bearing designed for use with matching Timken tapered roller cups 1.75" Inner diameter supports axle, hub, and powertrain applications Tapered design handles high combined radial and thrust loads efficiently Precision-ground raceways reduce friction and wear High-strength steel construction with optimized heat treatment for durability Imperial sizing fits a wide range of legacy and heavy-duty machinery Specs: Part number: 2785 Inner diameter (ID): 1.75" (1-3/4") Bearing type: Tapered roller bearing single cone Material: High-carbon steel Load type: Combined radial and axial (thrust) System: Imperial Compatible cup: Timken 2720 (sold separately) Applications: Axles, hubs, differentials, powertrains, and other rotating systems What's In The Box You'll receive one Timken 2785 tapered roller bearing single cone.
Step on the dual-pin foot lever on this heavy-duty jack to use the drop leg hands-free - makes up half the total travel. Best for gooseneck setups where you can step between the truck and trailer. Heavy-duty jack screw can lift up to 5 tons.Features: Easy-to-use foot lever faces the front - no more bending, squatting, or muddy knees Use the drop leg completely hands-free Drop leg extension makes up about half of the total travel Works best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Black powder coated finish on inner and outer tubes Footplate minimizes sinking in soft ground Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes footplate, handle, and connecting pin Specs: Lift capacity: 12,000 lbs Support capacity : 20,000 lbs Lift: 13-1/2" Drop leg adjustment: 13" Total adjustment: 26-1/2" Overall height (from bottom of foot to top of jack): Retracted: 29-1/2" Extended: 56" Outer tube width: 4-3/8" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 2-1/2" on center Jack screw diameter: 1-1/4" 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Pull the front-facing plunger pin to release the drop leg for 13-1/2" of manual adjustment. The jack provides 12-3/8" of lift, while a durable screw and built-in grease zerk help ensure smooth, reliable operation. Includes a sidewind crank.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Easily-to-reach side-facing plunger pin deploys the drop leg Works best for setups where the jack is located behind the A-frame Spring return retracts the drop leg hands-free Drop leg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Heayv-duty internal compotents Durable 1" jack screw allows for heavy lifting Smooth screw travel - a second thrust bearing reduces friction and heat buildup Weather-resistant black painted inner and outer tubes Easy to maintain even in a long life of hard work Grease zerk fittings help keep gears working smoothly Footplate minimizes sinking in soft ground Weld-on installation Includes sidewind handle Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Lift: 12-1/4" Drop leg adjustment: 13-1/2" Total adjustment: 25-3/4" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Diameter mounting hole Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Pull the front-facing plunger pin on this jack to release the drop leg, adding 13-1/2" of manual adjustment to 12-3/8" of lift. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength. The built-in grease zerk allows for effortless greasing. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Footplate minimizes sinking in soft ground Weld-on installation Handle (TJD-12000-HD) sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Lift: 12-1/4" Drop leg adjustment: 13-1/2" Total adjustment: 25-3/4" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Mounting hole diameter Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg, adding 13-3/4" of manual adjustment to 15" of lift. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Lift: 15" Drop leg adjustment: 13-3/4" Total adjustment: 28-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg, adding 13-3/4" of manual adjustment to 15" of lift. Durable screw offers increased strength. Built-in grease zerk allows effortless greasing.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Lift: 15" Drop leg adjustment: 13-3/4" Total adjustment: 28-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Keeping wheel bearings properly secured is essential for smooth, reliable towing. This spindle nut kit includes the hardware needed to lock bearings in place and maintain proper wheel assembly on compatible heavy-duty trailer axles.Retail Clamshell Kit: Includes a 6-slot castle spindle nut, round spindle washer, and 2-1/2" long cotter pin in clamshell packaging, with a 1-year limited warranty.
Keeping wheel bearings properly secured is essential for smooth, reliable towing. This spindle nut kit includes the hardware needed to lock bearings in place and maintain proper wheel assembly on compatible medium-duty trailer axles.Retail Clamshell Kit: Includes a 6-slot castle spindle nut, round spindle washer, and cotter pin in clamshell packaging, with a 1-year limited warranty.
Keeping wheel bearings properly secured is essential for smooth, reliable towing. This spindle nut kit includes the hardware needed to lock bearings in place and maintain proper wheel assembly on compatible medium-duty trailer axles.Key Spindle Parts Included: Kit includes a 6-slot castle spindle nut, D-flat spindle washer, and tang spindle washer. Retail Clamshell Kit: Comes in clamshell packaging for easy display, with a 1-year limited warranty.
Keeping wheel bearings properly secured is essential for smooth, reliable towing. This spindle nut kit includes the hardware needed to lock bearings in place and maintain proper wheel assembly on compatible heavy-duty trailer axles.Key Spindle Parts Included: Kit includes a 6-slot castle spindle nut, round spindle washer, and cotter pin. Retail Clamshell Kit: Comes in clamshell packaging for easy display, with a 1-year limited warranty.
Replacement washer is designed for use with 1" diameter spindles.Features: Replacement washer is designed for use with 1" diameter spindles Specs: Overall diameter: 1.658" Inner diameter: 1.01" Thickness: 0.121"
Replaces 1 of the hardened, flat washers needed when re-building your Dutton-Lainson model 6400 trailer jack (DL22560).Features: Replaces 1 of the hardened, flat washers needed when re-building your Dutton-Lainson trailer jack Works with model 6400 jacks (DL22560) 207357 Replacement Hardened Flat Washer for Dutton-Lainson Trailer Jacks - Qty 1
Filters
