Lock down your propane tanks to keep them safe and secure on your Airstream trailer. This specially designed lock attaches to the 1/2" threadedrod that is positioned in the middle of your dual propane tank setup.Features: Lock secures 2 propane tanks together when they're mounted on your Airstream trailer High-impact, aircraft-grade aluminum construction No modifications to tanks or trailer required Fast, easy installation Remove handle from threadedrod between tanks Place GasLock U-bracket over rod so tab with hole faces front of trailer Install lock handle over threadedrod and tighten, then line up handle with locking hole in bracket Insert pin lock through handle and U-bracket to secure 2 Keys and theft-deterrent sticker included Made in the USA Specs: Application: dual propane tank setups on Airstream trailers 1/2" Threadedrods Lifetime warranty
Lock down your propane tanks to keep them safe and secure on your Airstream trailer. This specially designed lock attaches to the 3/8" threadedrod that is positioned in the middle of your dual propane tank setup.Features: Lock secures 2 propane tanks together when they're mounted on your Airstream trailer High-impact, aircraft-grade aluminum construction No modifications to tanks or trailer required Fast, easy installation Remove handle from threadedrod between tanks Place GasLock U-bracket over rod so tab with hole faces front of trailer Install lock handle over threadedrod and tighten, then line up handle with locking hole in bracket Insert pin lock through handle and U-bracket to secure 2 Keys and theft-deterrent sticker included Made in the USA Specs: Application: dual propane tank setups on Airstream trailers 3/8" Threadedrods Lifetime warranty
... This complete mounting kit holds the cylinders in the pan and clamps them in place with a support bar, 24" threadedrod, and wing nut.This complete mounting kit gives two 30-lb cylinders a pan to sit in and clamps them down with the support bar, threadedrod, and wing nut. When it's time for a refill, loosen the wing nut by hand and remove the cylinders. Specs Application: two 30-lb propane cylinders Threadedrod length: 24" Includes: support pan, support bar, threadedrod, and wing nut
Lock down your propane tanks to keep them safe and secure on your trailer or RV. This specially designed lock attaches to the 3/8" threadedrod that is positioned in the middle of your dual propane tank setup.Features: Lock secures 2 propane tanks together when they're mounted on your trailer or RV High-impact, aircraft-grade aluminum construction No modifications to tanks or trailer required Fast, easy installation Remove handle from threadedrod between tanks Place GasLock U-bracket over rod so tab with hole faces front of trailer Install lock handle over threadedrod and tighten, then line up handle with locking hole in bracket Insert pin lock through handle and U-bracket to secure 2 Keys and theft-deterrent sticker included Made in the USA Specs: Application: dual propane tank setups 3/8" Threadedrods Lifetime warranty
Lock down your propane tanks to keep them safe and secure on your trailer or RV. This specially designed lock attaches to the 1/2" threadedrod that is positioned in the middle of your dual propane tank setup.Features: Lock secures 2 propane tanks together when they're mounted on your trailer or RV High-impact, aircraft-grade aluminum construction No modifications to tanks or trailer required Fast, easy installation Remove handle from threadedrod between tanks Place GasLock U-bracket over rod so tab with hole faces front of trailer Install lock handle over threadedrod and tighten, then line up handle with locking hole in bracket Insert pin lock through handle and U-bracket to secure 1 Key and a theft-deterrent sticker included Made in the USA Specs: Application: dual propane tank setups 1/2" Threadedrods Lifetime warranty
Your RV's propane tanks need to stay clamped to the tank pan during travel. This 24" threadedrod works with a compatible support bar and wing nut to hold the cylinders down, replacing a missing or damaged rod.Pair with a Support Bar: Works with the universal tank support bar and wingnut kit (MEC72KR and MEC62KR - sold separately). Specs Fit: Length: 24" Type: threaded propane tank support rod Application: compatible towable RV propane tank hold-down assemblies Compatible support bar: MEC72KR
JR Products threaded LP rod is used to securely mount your LP tanks to your RV LP tank pan.Features: Threaded LP rod is used to securely mount your LP tanks to your RV LP tank pan Works with 30-lb tanks Specs: Overall length: 23-1/2" Threaded lengths: 3-7/8" Diameter: 1/2"
JR Products threaded LP rod is used to securely mount your LP tanks to your RV LP tank pan.Features: Threaded LP rod is used to securely mount your LP tanks to your RV LP tank pan Works with 20-lb tanks
Your RV's propane tanks need to stay clamped to the tank pan during travel. This 18" threadedrod works with a compatible support bar and wing nut to hold the cylinders down, replacing a missing or damaged rod.Pair with a Support Bar: Works with the universal tank support bar and wingnut kit (MEC72KR and MEC62KR - sold separately). Specs Fit: Length: 18" Type: threaded propane tank support rod Application: compatible towable RV propane tank hold-down assemblies Compatible support bar: MEC72KR
Replaces the ACME threadedrod and threaded nut on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity and a 12,000-lb static capacity. ... Features: Replaces the threaded ACME rod and lift nut from your etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity and a 12,000-lb static capacity Designed for TJD-12000 Series jacks Includes: 1 ACME rod 1 Lift nut Specs: Lift capacity: 10,000 lbs Static capacity: 12,000 lbs Overall dimensions of rod: 17-3/4" long x 1" diameter Lift nut fits 3-1/2" x 3-1/2" square jack inner tube Note: This replacement rod and nut will not work on your jack if you do not have an octagonal bushing as shown below - typically if your jack is older than 2014.
Replaces the ACME threadedrod and threaded nut on your etrailer or Ram square, direct-weld jack with a 12,000-lb lift capacity and a 15,000-lb static capacity. ... Features: Replaces the threaded ACME rod and lift nut from your etrailer and Ram square, direct-weld jacks with a 12,000-lb lift capacity and a 15,000-lb static capacity Designed for TJD-15000 Series jacks Includes: 1 ACME rod 1 Lift nut Specs: Lift capacity: 12,000 lbs Static capacity: 15,000 lbs Overall dimensions of rod: 17-3/4" long x 1" diameter Lift nut fits 3-1/2" x 3-1/2" square jack inner tube
Easily transport your propane tanks by using the mounting system to attach the tank to your RV. Tank pan can be secured to most towable RVs. Hold-down bar keeps tanks securely in place while your vehicle is in motion.Features: Easily and safely transport your propane using the propane tank holder mounting system Black tank pan secures dual LP tank setups on most towable RVs Measures 23-1/2" long x 8-1/2" wide Holds 20-lb tanks Threadedrod securely mounts LP tanks to the tank pan Measures 17-1/2" long Adjustable hold-down bar keeps the tanks in place while your vehicle is in motion Notched bar accepts three sizes of LP tanks Center hole measures 1/2" diameter Wingnut mounts to the top of the threadedrod so that the hold-down bar does not move
Easily transport your propane tanks by using the mounting system to attach the tank to your RV. Tank pan can be secured to most towable RVs. Hold-down bar keeps tanks securely in place while your vehicle is in motion.Features: Easily and safely transport your propane using the propane tank holder mounting system Black tank pan secures dual LP tank setups on most towable RVs Measures 23-1/2" long x 8-1/2" wide Holds 30-lb tanks Threadedrod securely mounts LP tanks to the tank pan Measures 23-1/2" long Adjustable hold-down bar keeps the tanks in place while your vehicle is in motion Notched bar accepts three sizes of LP tanks Center hole measures 1/2" diameter Wingnut mounts to the top of the threadedrod so that the hold-down bar does not move
Easily transport your propane tanks by using the mounting system to attach the tank to your RV. Tank pan can be secured to most towable RVs. Hold-down bar keeps tanks securely in place while your vehicle is in motion.Features: Easily and safely transport your propane using the propane tank holder mounting system White tank pan secures dual LP tank setups on most towable RVs Measures 23-1/2" long x 8-1/2" wide Holds 20-lb tanks Threadedrod securely mounts LP tanks to the tank pan Measures 17-1/2" long Adjustable hold-down bar keeps the tanks in place while your vehicle is in motion Notched bar accepts three sizes of LP tanks Center hole measures 1/2" diameter Wingnut mounts to the top of the threadedrod so that the hold-down bar does not move
Easily transport your propane tanks by using the mounting system to attach the tank to your RV. Tank pan can be secured to most towable RVs. Hold-down bar keeps tanks securely in place while your vehicle is in motion.Features: Easily and safely transport your propane using the propane tank holder mounting system White tank pan secures dual LP tank setups on most towable RVs Measures 23-1/2" long x 8-1/2" wide Holds 30-lb tanks Threadedrod securely mounts LP tanks to the tank pan Measures 23-1/2" long Adjustable hold-down bar keeps the tanks in place while your vehicle is in motion Notched bar accepts three sizes of LP tanks Center hole measures 1/2" diameter Wingnut mounts to the top of the threadedrod so that the hold-down bar does not move
Sealant tape is used to tighten and seal gas fittings.This tape is UL/ULC approved to 1,000 psi and has a temperature range of -450 F - 500 F. Measures 1/2" wide x 236" long.Features: Gas sealant tape is used to tighten and seal gas fittings Allows the male threaded pipe to turn deeper into female threaded pipe fittings and fills irregularities in the threads preventing leaks Commonly used to identify natural gas pipes UL/ULC approved to 1,000 psi Temperature range: -450 F - 500 F Dimensions 1/2" wide x 236" long Non-toxic Corrosion resistant Made in the USA
Rid your rig of the rocking with this easy-to-use, stabilizing wheel chock for dual-axle trailers and motor homes. Simply place the chock between tandem tires and expand it until the give between the wheels is gone. Expands up to 5-1/4" wide.No more front-to-back motion. Mounting the Chock and Lock Adjust the chock using the threadedrod and nut at the top of the unit. Simply place the chock, in the open position, between the tandem tires and turn the nut on the rod until the width of the unit fits the spacing of your tires.
Rid your rig of the rocking with this easy-to-use, stabilizing wheel chock for dual-axle trailers and motor homes. Simply place the chock between tandem tires and expand it until the give between the wheels is gone. Expands up to 10" wide.No more front-to-back motion. Mounting the Chock and Lock Adjust the chock using the threadedrod and nut at the top of the unit. Simply place the chock, in the open position, between the tandem tires and turn the nut on the rod until the width of the unit fits the spacing of your tires.
Rid your rig of the rocking with these easy-to-use, stabilizing wheel chocks. Simply place the chocks between the tandem tires on either side of your RV and expand them until the give between the wheels is gone. For up to 5-1/4" wheel spacing.No more front-to-back motion. Mounting the Chock and Lock Adjust the chocks using the threadedrod and nut at the top of each unit. Simply place a chock, in the open position, between the tandem tires and turn the nut on the rod until the width of the unit fits the spacing of your tires.
This fast electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. Offers 26" of total lift. Extends 6" in 18.4 seconds with 1,000 lbs of tongue weight.Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Efficient ball screw makes it fast and easy to position your trailer Ball bearings roll along sturdy, threaded steel rod Powered drive provides quiet operation and eliminates the need for hand cranking Easy-to-access on/off and retract/extend buttons make for simple operation Buttons on front panel will not break off like standard toggle switches Wireless capability - operate jack with included remote control key fob Hitch memory function stores hitch height and weight distribution system height to make hooking up simple Automatically returns your trailer to the position at which you unhooked LED courtesy light on front of jack allows for simple nighttime setup Durable powder coat finish resists corrosion Emergency override allows manual operation in case of power failure Included adapter allows you to easily use your drill to raise and lower the jack Manual crank handle not included Bolt-on installation Specs: Bracket height: Retracted: 10-1/2" Total lift: 26" Screw travel: 21" Drop leg travel: 5" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 18.4 seconds Retracts 6" in 18.7 seconds Lift capacity: 5,500 lbs Outer tube diameter: 2-1/4" Footplate diameter: 7" Motor attributes: 12 Volt 2-Year warranty 10-Year warranty when registered within 90 days How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of lift and 4-1/2" of extension with the drop leg. Extends 6" in 9.5 seconds with 1,000 lbs of tongue weight.Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Efficient ball screw makes it fast and easy to position your trailer Ball bearings roll along sturdy, threaded steel rod Powered drive provides quiet operation and eliminates the need for hand cranking Easy-to-access on/off and retract/extend buttons make for simple operation Buttons on front panel will not break off like standard toggle switches LED courtesy light on front of jack allows for simple nighttime setup Durable powder coat finish resists corrosion Emergency override allows manual operation in case of power failure Included adapter allows you to easily use your drill to raise and lower the jack Manual crank handle not included Bolt-on installation Specs: Bracket height: 10-1/2" Retracted - from mounting bracket to bottom of footpad 28-1/2" Extended - from the bottom of the extended jack and extended footpad Lift: 18" Drop leg adjustment: 4-1/2" Total adjustment: 22-1/2" Drop leg adjustment: 4 holes, 1-1/2" apart center to center Travel speed (with 1,000-lb tongue weight): Extends 6" in 9.5 seconds Retracts 6" in 8.6 seconds Lift capacity: 4,000 lbs Outer tube diameter: 2-1/4" Footplate diameter: 6" Motor attributes: 12V 10" Lift in 18 seconds 2-Year warranty 10-Year warranty if registered within 90 days How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric jack has a drop leg for 5-1/2" of lift on top of the 18" of screw travel. Large footplate minimizes sinking. Jack can be welded or bolted onto any A-frame trailer.Features: Tongue jack positions quickly and easily 12V Motor powers jack, eliminating need for hand cranking Built-in, water-resistant toggle switch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable Drop leg provides an extra 5-1/2" of lift for added clearance Dual side lights make it simple to set up your camper at night Emergency, ratchet-style crank socket 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Grease access hole on the lower stem assembly allows access to grease the threadedrod which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware included Mounting holes fit 2" or 2-1/4" spacing Round footplate included Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/4" Retracted with drop leg retracted 27-1/4" Extended with drop leg retracted 32-3/4 Extended with drop leg extended Total lift: 23-1/2" Screw travel: 18" Drop leg travel: 5-1/2" Lift capacity: 3,500 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 6" Distance between mounting holes center to center: 3" 5-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric jack has a drop leg for 4-1/2" of lift on top of the 18" of screw travel. Large footplate minimizes sinking. Jack can be welded or bolted onto any A-frame trailer. Extends 6" in 29.8 seconds with 1,000 lbs of tongue weight.Features: Tongue jack positions quickly and easily with integrated drop leg 12V Motor powers jack, eliminating need for hand cranking Built-in toggle switch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable Large front light makes it simple to set up your camper at night LEDs last longer and use less energy than incandescent bulbs Lamp is positioned so that it directs light downward to better focus on ground Emergency, ratchet-style crank socket 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Zerk fitting on the lower stem assembly allows access to grease the threadedrod which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware not included Mounting holes fit 2-1/4" spacing Extra-large footplate provides excellent stability Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/2" Retracted with footplate retracted 27-1/2" Extended with footplate retracted 32" Extended with footplate extended Total lift: 22-1/2" Screw travel: 18" Drop leg travel: 4-1/2" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 29.8 seconds Retracts 6" in 27.6 seconds Lift capacity: 4,000 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 6" 5-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Filters
