A compact, springmounted dome light ideal for interior compartments in trailers, RVs, utility and emergency vehicles.Features: Powered by standard 6 LED array Includes springmount and integrated ON/OFF switch Low profile bezel with integrated diffused lens Ultra long lifespan, moisture resistant, vibration proof design Easy installations in ceilings or panels, no tools required Specs: Measurements: 4-1/2" wide, 1-1/4" deep LEDs: Six standard LEDs Brightness: 300 lumens Color: Neutral white Voltage: 9 to 14 volts DC Mounting: Springmounted Wiring: 8" sheathed pigtail Beam angle: 180 degree flood Lifetime warranty TecNiq brings reliable lighting with a clean, low profile design.
If you're updating your trailer or swapping out old parts, this plain steel spring seat makes repairs or upgrades easy on a wide range of trailer setups. It welds to a 2-3/8" round axle and fits 1-3/4" or 2" springs.Easy Upgrade or Replacement: Ideal for axle repairs or custom trailer projects - just remember, you'll need two per axle. Specs Application: Weld-on spring seat for trailer axles Fits round, 2-3/8" axle (standard for many 3,500-lb axles) Works with 1-3/4" or 2" wide leaf springs General: Material: plain steel Quantity: 1 spring seat (2 required per axle)
The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle.Features: Welds onto round, 3" diameter axle (typical 5,200-lb to 7,200-lb axle) Works with 1-3/4" or 2" wide spring Cutout on flat side of seat surrounds raised knob on leaf spring to prevent turning or shifting Provides extra support and secure positioning for trailer axle Please note: 2 spring seats are required for each axle
The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle.Features: Welds onto round, 2-3/8" diameter axle (typical 3,500-lb axle) Works with 1-3/4" or 2" wide spring Cutout on flat side of seat surrounds raised knob on leaf spring to prevent turning or shifting Provides extra support and secure positioning for trailer axle Please note: 2 spring seats are required for each axle
Leaf-springmounting kit includes 5" tall front hangers, 4-1/2" tall center hangers, 6-3/8" tall rear hangers and hardware. Equalizers are 17-3/8" long. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 17-3/8" Long straight equalizers (13-118-03) Allows for 42-1/4" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 34-2/3" 42-1/4" 35" 4-7/8"
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, overslung axle - springs sit over axle For tandem axle applications, use 2 kits Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2" Limited lifetime warranty 30-Day satisfaction guarantee Note: Does not work with spring plates wider than 4-1/4".
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 500 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 4" tall x 4" diameter Compresses up to 70 percent of original height with full memory rebound Required clearance between top of spring pack and bottom of trailer frame: 6" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
9/16" Diameter spring-retainer bolt is used to mount slipper spring inside front hanger. Includes locknut.Features: Suspension bolt attaches leaf spring to front hanger Included locknut secures in place on bolt Specs: Diameter: 9/16" Length: 3-1/2"
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 7-7/16" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, overslung axle - springs sit over axle For tandem axle applications, use 2 kits Capacity: 500 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 70 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2" Limited lifetime warranty 30-Day satisfaction guarantee Note: Does not work with spring plates wider than 4-1/4".
5/16" Diameter spring-retainer bolt is used to mount slipper spring inside rear hanger. Includes locknut.Features: Suspension bolt attaches leaf spring to rear hanger Slipper spring slides into hanger and rests on bolt Included locknut secures in place on bolt Specs: Diameter: 5/16" Threads per inch: 18 Length: 3-1/4" Grade: 2
1/2" Diameter spring-retainer bolt is used to mount slipper spring inside rear hanger. Locknut sold separately.Features: Suspension bolt attaches leaf spring to rear hanger Slipper spring slides into hanger and rests on bolt Locknut (12N-Z - sold separately) secures in place on bolt Specs: Diameter: 1/2" Threads per inch: 20 Length: 4-1/2" Grade: 2
5/16" Diameter spring-retainer bolt is used to mount slipper spring inside rear hanger. Locknut sold separately.Features: Suspension bolt attaches leaf spring to rear hanger Slipper spring slides into hanger and rests on bolt Locknut (6-11; sold separately) secures in place on bolt Specs: Diameter: 5/16" Threads per inch: 18 Length: 3-1/4" Grade: 2
Mount your round, 3" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 7-1/16" Long U-bolts (176500) (2) U-Bolt plates for 2" springs (117521-G) (8) 9/16"-18 Hex nuts (916N) Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 3" Typical 5,200-lb to 7,000-lb axle Spring width: 2" Dimensions: see below
Mount your round, 3" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 7" Long U-bolts (1755892) (2) U-Bolt plates for 1-3/4" springs (TP-3000175) (8) 1/2"-20 Hex nuts (12N) Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 3" Typical 5,200-lb to 7,000-lb axle Spring width: 1-3/4" Thread dimensions: 2" long x 1/2"-20 Dimensions: see below
Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 5-1/2" Long U-bolts (2) U-Bolt plates for 1-3/4" springs (8) 7/16"-20 Hex nuts Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 2-3/8" Typical 3,500-lb axle Spring width: 1-3/4" Dimensions: see below
Mount your round, 1-3/4" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 4-1/4" Long U-bolts (175643) (2) U-Bolt plates for 1-3/4" springs (117535) (8) 3/8"-24 Hex nuts (38N) Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 1-3/4" Typical 2,000-lb axle Spring width: 1-3/4" Dimensions: see below
Mount your round, 3-1/2" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 8" Long U-bolts (11-65) (2) U-Bolt plates for 1-3/4" or 2" springs (117581) (8) 9/16"-18 Hex nuts (916N) Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 3-1/2" Typical 8,000-lb axle Spring width: 1-3/4" & 2" Dimensions: see below
Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 1/2" Hex nuts and washers Spring seats (sold separately) required for mounting axle to leaf spring Made in the USA Specs: Application: 2-3/8" diameter axle Typical 3,500-lb axle U-bolt dimensions Inner width: 2-7/16" Length: 5-1/2" Diameter: 1/2"
Mount your round, 3" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 1/2" Hex nuts and washers Spring seats (sold separately) required for mounting axle to leaf spring Made in the USA Specs: Application: 3" diameter axle Typical 5,200-lb to 7,000-lb axle U-bolt dimensions Inner width: 3-1/8" Length: 7" Diameter: 1/2"
Mount your round, 1-3/4" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 3/8" Hex nuts and washers Spring seats (sold separately) required for mounting axle to leaf spring Made in the USA Specs: Application: 1-3/4" diameter axle Typical 2,000-lb axle U-bolt dimensions Inner width: 1-7/8" Length: 4" Diameter: 3/8"
Mount your square, 2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 1/2" Hex nuts and washers Made in the USA Specs: Application: 2" wide, square axle U-bolt dimensions Inner width: 2-1/8" Length: 4-1/2" Diameter: 1/2"
Mount your square, 1-1/2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Made in the USA Specs: Application: 1-1/2" wide, square axle U-bolt dimensions: Inner: 3-5/16" Long x 1-5/8" wide Overall: 3-5/8" Long x 2-3/8" wide Thread dimensions: 2-1/2" long x 3/8" diameter Mounting plate dimensions: 3-3/8" long x 3" wide Kit includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 3/8" Hex nuts and washers
This leaf spring suspension kit prevents shock transfer between axles, increasing traction while braking by as much as 70 percent. Heavy-duty shocks reduce bouncing, chucking and porpoising of your trailer up to 50 percent. ... The flat slipper end of each spring will slide into one of the provided center hanger boxes. The 2 center springs will mount in the middle of the setup, attaching to the hanger boxes on either side.
Filters
