Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. ... For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength. The built-in grease zerk allows for effortless greasing. ... For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. ... Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Topwind A-frame jack offers powered capability with built-in drive nut. Use your drill and socket to quickly raise and lower jack, or operate it manually. 14" Lift makes this jack ideal for multiple agricultural and commercial applications.Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Highlights Weld-On Pipe Mount: Male pipe bracket welds to trailer; jack slides off for security or storage. Drill or Manual Operation: Includes hand crank and Trailer Valet drill attachment. Full Range Travel: Lift and drop leg combine for wide height adjustment on any terrain.
Replaces the white jackcrank hub cap for your camper jack system. Fits all HappiJac manual and electric camper jack systems. Includes one hub cap.Features: Replaces the white jackcrank hub cap for your camper jack system Fits all HappiJac manual and electric camper jack systems Includes one hub cap Fits: All HappiJac manual and electric camper jack systems
Replaces the crank from your etrailer or Ram square, direct-weld jack with a 10,000-lb or 12,000-lb lift capacity. Handle allows you to manually crank the jack. ... Features: Replaces the sidewind crank handle from your etrailer or Ram square, direct-weld jack with a 10,000-lb or 12,000-lb lift capacity Designed for TJD-12000 Series jacks Durable steel construction with black powder coat finish Mounting hardware included
Replaces the crank handle on your etrailer or Ram scissor jacks (TJSCHD-24). Handle allows you to manually crank the jacks.Features: Replaces the crank handle on your etrailer or Ram 5,000-lb scissor stabilizer jack set (TJSCHD-24) Crank handle allows you to manually crank your jacks
Replaces the crank handle on your etrailer scissor jacks (e56VV and e96VV). Handle allows you to manually crank the jacks.Features: Replaces the crank handle on your etrailer 2,500-lb and 7,500-lb scissor stabilizer jacks (e56VV and e96VV) Crank handle allows you to manually crank your jacks
Replaces the crank handle for your Stromberg Carlson electric trailer jack (JET-2500, JET-3555, JET-3755, or JET-5000). Allows you to manually crank your jack in case there is no electricity available.Specs: Socket size: 7/16" Features: Replaces the crank handle on your Stromberg Carlson electric A-frame tongue jack Fits the following models: JET-2500, JET-3555, JET-3755, or JET-5000
Replaces the entire hand crank assembly on your Trailer Valet swivel jack and trailer mover (STC-V211).Features: Replaces the entire hand crank assembly of your Trailer Valet swivel jack and trailer mover (STC-V211) Includes 1 crank assembly
Replace the crank handle that came with your Lippert Components manual scissor jack with this new one. Crank handle assists in lowering and raising your scissor jack on your RV or trailer.Features: Manual crank handles can become easily lost at the campsite. Order your replacement crank handle here! Standard Lippert Components manual scissor jackcrank handle Can also be used with Lippert power tongue jacks in the event of a power failure 3/4" Hex socket 90-Day warranty
Hand crank for your HappiJac camper jack system allows you to manually raise and lower your jacks.Features: Hand crank lets you manually raise and lower your truck bed camper jacks Works with all HappiJac camper jack systems 4" Long shaft
Hand crank for your HappiJac camper jack system allows you to manually raise and lower your jacks. 8" Long shaft offers increased clearance.Features: Hand crank lets you manually raise and lower your truck bed camper jacks Works with all HappiJac camper jack systems 8" Long shaft for increased clearance
This crank handle will help you raise and lower your Stromberg Carlson scissor jack according to your needs.Features: Helps you raise and lower your Stromberg Carlson scissor jack according to your needs Works with Stromberg Carlson scissor jacks Made in the USA Specs: Overall length: 25-1/2" 1-Year limited warranty
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.However, 1 person can do the job by alternately cranking each jack in small increments. When lifting and lowering your camper, be sure to keep the front of it higher than the rear, and always keep it level side to side.
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.However, 1 person can do the job by alternately cranking each jack in small increments. When lifting and lowering your camper, be sure to keep the front of it higher than the rear, and always keep it level side to side.
Easily load or unload your truck camper with these heavy-duty cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Automatic winch brakes prevent free-spooling.Simple Operation Using these jacks is simple. Place 1 jack on each side of your camper and position the L-shaped lift brackets underneath the body of the camper. Then crank the hand winches to lift or lower each side of the camper evenly until the proper height for loading or unloading is achieved.
Easily load or unload your truck camper with these heavy-duty cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Automatic winch brakes prevent free-spooling.Simple Operation Using these jacks is simple. Place 1 jack on each side of your camper and position the L-shaped lift brackets underneath the body of the camper. Then crank the hand winches to lift or lower each side of the camper evenly until the proper height for loading or unloading is achieved.
You just backed your rig in, it's hot, and you aren't in the mood to crawl around in the gravel. Sound familiar? Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.Simple Install and Fit: Universal brackets mount easily to a variety of trailer frames. One-Side Adjustment: Deploys both legs from one side to save time at camp. Manual Backup Included: Crank handle lets you operate it without a drill if needed.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 10" lift and 7-11/16" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Filters
