9-1/8" x 8" Oval. LED security light illuminates your RV's exterior with bright light to deter unwanted guests. Durable white metal base and polycarbonate lens. Surface mount - hardware not included. 2-Wire pigtail.Features: Oval LED security light illuminates your RV's exterior with bright light to deter unwanted guests LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable white metal base and polycarbonate lens Clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire CSA compliant Assembled in the USA Specs: Dimensions: 9-1/8" long x 8" tall x 1-1/2" deep Light output: 1221 lumens Diodes: 39 Wire length: 5" 1-Year limited warranty Surface-Mount Light Surface-mount RV lights install using pre-drilled mounting holes in the housing.
Oval LED security light illuminates your RV's exterior with bright light to deter unwanted guests. Durable black polycarbonate base and polycarbonate lens. ... These lights lay flat against the RV surface and only require a small, often pre-existing hole, for wiring. Mounting hardware (not included) is used to secure the light to the RV.
Replaces the lens for your Gustafson Lighting RV scarelight (GSL8123).Features: Replaces the lens for your Gustafson Lighting RV scarelight (GSL8123) Durable plastic construction Specs: Dimensions: 8-3/4" long x 3-7/8" wide Quantity: 1 lens Fits: Model number GSL8123 , Gustafson Lighting RV porch light
... It installs easily and covers all your essential lighting needs.Highlights Complete Trailer Lighting Setup: Kit includes tail lights, side marker lights, harness, and license bracket. DOT Lighting Coverage: Includes required lighting and reflectors for DOT compliance on trailers.
Get more visibility out back without adding a cluster of separate lights. This slim 15" bar combines your stop, turn, tail, and backup lights, while the smoke lens keeps a low-key blacked-out look when the lights are off.Highlights Four Functions in One Light Bar: Stop, turn, tail, and back-up lighting share one 15" fixture. Black-Out Look When Off: Smoke lens keeps the light bar dark until the red or white LEDs illuminate.
15-1/2" Long x 1" tall x 1/2" thick ID light bar. Waterproof LED identification light bar with integrated utility light for trailers. Polycarbonate lenses and base. Surface mount. ... P2-Rated Light A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... Mounting hardware is used to secure the light to the trailer.
This long, thin tail light fits in those tight spaces on your trailer or truck where you couldn't fit anything else. It mounts on the surface and wires to your trailer with the included 3-wire pigtail.Features: Thinline Series light fits in tight spaces GloLight tail light is bright and easy to see, day or night Bar glows for tail light Center LEDs light up for brake light and flash for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount Hardware not included 3-wire pigtail wires to trailer Black wire for tail light Red wire for brake and turn signal White wire with #10 ring terminal for ground DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 17" long x 1-3/8" tall x 1" thick Mounting holes: 16-1/8" apart on center Pigtail harness length: 7" Diodes: 28 Power draw at 12.8 volts: Stop/turn signal light: 0.634 amps Tail light: 0.445 amps Lifetime LED warranty
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer with the built-in flange, and hardwires to trailer.Features: Halo tail light is bright and easy to see, day or night Outer band functions as tail light Center flashes for turn signal Both brightens for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount with built-in flange Hardware not included 3-Wire pigtail hardwires into trailer Black wire for tail light Red wire for brake and turn signal White wire for ground DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" out from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Brake/turn signal light: 0.59 amps Lifetime warranty on LEDs
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! ... This beam pattern makes the light visible from the front and both sides, enhancing visibility and safety. When properly installed, it functions as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. ... Features: Oval trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights GloLight lens creates a solid circle of light with a smooth appearance Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red and white LEDs Red LEDs for tail light White LEDs for backup light Mounts on surface of trailer with built-in black flange - hardware not included Hardwired with 2 female PL-3 plugs for standard connections DOT compliant Specs: Overall dimensions: 7-1/2" wide x 3-1/4" tall x 3/4" deep Light face dimensions: 6-1/2" wide x 2-1/4" tall Diodes: 22 Power draw at 12.8 volts: 0.46 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
You're chopping vegetables at the counter or sitting down for a late game of cards. This satin black hoop pendant lights the island without hanging in the way, giving you a clean glow overhead that makes the space feel open and usable.Highlights Adds style without bulk: Modern satin black hoop design. Low profile: Flush-mount base keeps the light tucked up and out of the way. Bright focus: LED fixture lights up your island for cooking, meals, or game nights. Specs Style: Hoop pendant light Dimensions: Overall: 40" long x 19-3/4" wide x 3-1/2" tall Large ring diameter: 19-3/4" 2 Smaller ring diameters: 15-3/4" Mount type: flush mount Finish: Satin black Lighting: LED 1-bulb fixture
4" Round waterproof LED trailer light with 24 diodes provides stop, turn, tail, and back-up functions. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). ... LEDs vs. Incandescent Lights The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
Brighten up a dark hallway or add stylish, accented light around furniture. The frosted white glass shade softens the glare of the light. Use the integrated push button to turn it on and off or wire to a switch.Or perhaps you simply just want to upgrade the accent lighting near your furniture? This incandescent wall light is bright enough to light up your RV's walkway, bedroom, or other living space, and the included frosted white glass shade softens that light so it's not too harsh.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brake light. Mounts with built-in flange and works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal and brightens for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Surface mount with built-in flange Hardware not included PL-3 connector works with 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 5-1/2" diameter x 1-1/2" thick Light face diameter: 4" Requires 4-1/2" hole in trailer for flange to sit flush Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs What Wiring Do I Need?
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal against moisture.Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surface mount - hardware not included Power lead and ground wire connect to your vehicle Specs: Dimensions: 7-1/8" diameter x 2-3/16" thick Distance between mounting holes (center on center): 6-1/4" Compatible with 12V DC systems Bulb type: 1157 Power draw at 12.8 volts: Stop: 2.4 amps Tail: 0.5 amps 3-Year warranty
... Red light.Features: Oblong trailer tail light serves 3 functions Stop light Tail light Turn signal light Smoked lens works great with blacked-out style on vehicles or trailers Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface with built-in black flange - hardware not included 3-Wire pigtail DOT compliant Specs: Overall dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Weight:.44 lbs Diodes: 9 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.2A Lifetime LED warranty
This red and white GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts in a cutout using a grommet (sold separately). Works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brake light Waterproof - great for boat trailers White LEDs with red and clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with standard 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Compatible with 12V DC systems Diodes: 22 Power draw at 12.8 volts: Tail light: 0.259 amps Brake and turn signal light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts with the built-in flange and comes with a 3-prong plug for quick installation.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Recessed mount with built-in flange Hardware not included 3-Prong plug connects to trailer DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
2-1/2" Diameter. Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). 2-Wire pigtail. ... So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate light on your trailer - one as a front or rear clearance light and one as a side marker light.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 light bar
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts in a cutout using a grommet (sold separately) and has a weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer band glows for a tail light Center flashes for turn signal Both brighten for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) Weatherproof connector requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture and protect your wiring.
Filters
