This steel D-ring tie-down kit gives you a strong, secure anchor point for hauling cargo without getting in the way. The flush-mount design sits low to prevent interference, and each pack includes 2 rings with mounting hardware.Features: Steel D-ring tie-down kit provides a secure anchor point for hauling cargo Flush-mount design sits low so it does not interfere with your cargo 5,000-lb Rating supports heavy-duty tie-down applications Zinc-plated finish helps resist corrosion Stainless steel hardware and galvanized backer plates are included for installation 2 D-rings are included per pack Specs: Quantity: 2 D-rings Rating: 5,000 lbs Construction: Material: Steel Finish: Zinc plated Hardware: Stainless steel Backer plates: Galvanized
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. The curved D-ring gives hooks and straps more room to seat, so you can cinch down hard without fighting a flat ring.A Curved Ring Gives Your Tie-Down Hardware Room to Sit Right This D-ring has a bend instead of a flat ring, which helps hooks and strap hardware seat more naturally on the anchor point.
Kit provides versatile tie down points for securing cargo in your enclosed trailer, van, or pickup bed. Included are (2) 18" long aluminum tracks and 4 anchor rings. The rings can be set every 2 inches on the track to tie-off all types of items.Features: Extruded aluminum o-tracks can be installed vertically or horizontally on flat surfaces Adjustable spring loaded rings give you maximum flexibility in setting tie down points Ideal for use in pickups, vans and enclosed trailers Mounting hardware included Specs: Straight pull load max: 2,200 lbs Side pull load max: 1,750 lbs Ring thickness: 3/16" Ring hole diameter: 1" 90-Day limited warranty
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a direct place to connect, so you spend less time re-hooking and repositioning tie-downs.Why Forging Matters When You Use the Same Anchor Point Again and Again Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
Bolt a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and bolt-on clip give straps, chain, and hooks a solid place to connect, so you spend less time re-hooking and repositioning tie-downs.Why Forging Matters When You Use the Same Anchor Point Again and Again Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down hard without reworking tie-downs.Why Forging Matters When You Cinch Down Hard and Keep Hauling Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down hard without shifting tie-downs.Why Forging Matters When You Cinch Down Hard and Keep Hauling Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down without reworking tie-downs.Why Forging Matters When You Cinch Down Hard and Keep Hauling Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a solid place to connect, so you spend less time re-hooking and repositioning tie-downs.Why Forging Matters When You Cinch Down Hard and Keep Hauling Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Sidewind handle has zinc finish for attractive look and rust resistance Outer tube has corrosion-resistant black powder coat Inner tube and footplate have durable, rust-resistant, clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 15-1/2" Retracted 30" Extended Travel: 14-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-7/8" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 6-1/4" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
This heavy-duty O-ring tie-down anchor is perfect for securing a small car, UTV, or other large objects to the E track in your trailer or garage. It provides an attachment point for a ratchet strap, rope, chain, or bungee cord. 6,000 lbs Max load.Features: Heavy-duty O-ring provides an anchor point for securing a small car, UTV, or other large objects to your E track Perfect for attaching a ratchet strap, rope, chain, or bungee cord Spring-loaded fitting lets you easily move ring from one E track slot to another Zinc-plated steel is rust resistant Specs: Application: horizontal and vertical E track and X track Interior ring diameter: 1-1/2" Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 lbs 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has claw grip for comfortable, easy cranking Easily folds away for storage Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Bolt-on mounting bracket included Specs: Application: trailer frames with a height from 2" to 4" No more than 3" wide Bracket height Retracted: 11" Extended: 21-1/2" Travel: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 7-3/4" Lift capacity: 2,000 lbs 1-Year warranty
Round jack has a retracted height of 10" and an extended height of 20-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Sidewind handle has zinc finish for attractive look and rust resistance Outer tube has corrosion-resistant black powder coat Inner tube and footplate have durable, rust-resistant, clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 10" Retracted 20-1/2" Extended Travel: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" x 4-1/4" Handle radius: 6-1/2" Lift capacity: 2,000 lbs 1-Year warranty
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 11" Retracted 21-1/2" Extended Travel: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 7-3/4" Lift capacity: 2,000 lbs 1-Year warranty
This O-ring tie-down anchor is perfect for securing an ATV, generator, or other large object to the E track in your trailer or garage. It provides an attachment point for a ratchet strap, rope, chain, or bungee cord. 4,000 lbs Max load.Features: O-ring provides an anchor point for securing an ATV, generator, or other large object to your E track Perfect for attaching a ratchet strap, rope, chain, or bungee cord Spring-loaded fitting lets you easily move ring from one E track slot to another Zinc-plated steel is rust resistant Specs: Application: horizontal and vertical E track and X track Interior ring diameter: 1-7/8" Safe Working Load Limit: 1,333 lbs Maximum load (break strength): 4,000 lbs 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. ... Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Bezel dimensions: 4-1/2" wide x 4-7/8" tall D-ring thickness: 3/8" Inner ring diameter: 1-3/8" Recess dimensions: 3-3/8" wide x 3/4" deep Bolt hole dimensions: 3/8" wide x 3/8" long 1-Year limited warranty Features: Tie-down provides a solid point to secure your cargo with straps or bungee cords D-ring pivots 90 degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Zinc-plated steel construction resists corrosion and retains its strength through repeated use 1/4" Hole located underneath D-ring for drainage Simple, bolt-on installation Square mounting holes Mounting hardware not included Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
These sturdy steel D-rings create stable tie-down points in your trailer or truck bed. Recessed D-rings swivel 360 degrees for versatile tie-down positioning. ... Features: D-ring anchors provide tie-down points in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets you rotate D-rings so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-rings from interfering as you roll cargo into and out of your trailer or truck bed Backing plates reinforce the surface of your trailer where the tie-downs attach Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backing plates attach directly under D-ring anchors and on the opposite side of the mounting surface 16 Nuts, 16 lock washers, and (16) 5/16" x 2-1/4" bolts included Specs: Maximum load (break strength): 6,000 lbs per D-ring Safe working load limit (WLL): 2,000 lbs per D-ring Anchor dimensions: Base diameter: 6-5/16" Recess: 7/8" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6-1/2" wide x 1/8" thick Quantity: 4 D-rings Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Zinc-plated, corrosion resistant steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords D-ring 90-degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Included backing plate provides greater support than mounting the anchor directly to wood Zinc-plated steel construction resists corrosion and retains its strength through repeated use Simple, bolt-on installation with mounting hardware Includes 4 Nuts, 4 lock washers, and (4) 3/8" x 2-1/4" bolts Specs: Maximum load (break strength): 5,000 lbs Working load limit: 1,600 lbs Anchor: Bezel dimensions: 4-1/2" wide x 4-7/8" tall Ring diameter: 1/2" Inner ring diameter: 1-3/8" Recess dimensions: 3-3/8" wide x 3/4" deep Bolt hole dimensions: 3/8" wide x 3/8" tall Bolt size: 3/8" diameter x 2-1/4" long Backing plate dimensions: 6-1/2" wide x 6-1/2" tall 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Black powder coated anchors slide into a 2x4 stake pockets on your flatbed truck or trailer. Movable anchors secure with the included pins and clips, so you can quickly and easily remove and reinstall them as needed. 12,000 lbs Max load.Features: Stake pocket anchors provide tie-down points in your flatbed truck or trailer Movable anchors slide into a standard 2x4 stake pockets Can be easily removed and reinstalled as needed Secure in place with included pins and clips Hinged D-rings let you attach straps from different angles Black powder coated steel is durable and rust resistant Specs: Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Inner diameter of D-ring: 2-3/8" Anchor dimensions: 5" Tall from the bottom of the mounting plate to the bottom of the anchor 2-3/4" Wide 3-1/4" Tall from the bottom of the mounting plate to the top of the pin hole Quantity: 2 stake pocket tie-downs Anchor weight (each): 3 lbs 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. ... Features: Tie-down provides a solid point to secure your cargo with straps or bungee cords D-ring pivots 90 degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Zinc-plated steel construction resists corrosion and retains its strength through repeated use 1/4" Hole located underneath D-ring for drainage Simple, bolt-on installation Round mounting holes Mounting hardware not included Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Bezel dimensions: 4-1/2" wide x 4-7/8" tall D-ring thickness: 3/8" Inner ring diameter: 1-3/8" Recess dimensions: 3-3/8" wide x 3/4" deep Bolt hole dimensions: 3/8" wide x 3/8" long 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Bolt-on 5/8" forged D-ring spreads the pull to the entire mounting plate instead of concentrating it on a single point. Bolt-on design means you don't have to weld, so it's great for surfaces like wood where welding is not an option.Features: 4-Hole mounting bracket helps spread pull force to multiple anchor points Versatile uses across many applications Works on flat wood or metal surfaces Corrosion-resistant black powder-coated finish Strong forged steel construction Includes required mounting hardware: 4 carriage bolts and 4 nuts Made in the USA Specs: Working load limit: 6,130 lbs Ring diameter: 5/8" Inner dimensional height: 3" Inner dimensional width: 3" Carriage bolt length: 2-1/4"
Filters
