Protect your enclosed trailer and its contents from damage by replacing worn out weather stripping. This kit includes the tools you need to replace seals around gates for toy haulers and car trailers.Features: Ramp gate seal kit weatherproofs toy and vehicle hauler gates 35' Ribbed hollow bulb seal keeps the elements out of your trailer when door is closed Ramp gate corner seal installs near door hinge for added protection Comes in one single piece and is trimmed for a custom fit Plastic scraper tool helps you get rid of any old weather stripping and adhesive before install Loctite super bonder 495 glue closes gaps in seal as you make trims for mitered corners Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Seal dimensions: 7/8" wide x 1" tall Made in the USA
Protect your enclosed trailer and its contents from damage by replacing worn out weather stripping. This kit includes the tools you need to replace seals around gates for toy haulers and car trailers.Features: Ramp gate seal kit weatherproofs toy and vehicle hauler gates 35' Half round seal with tabs keeps the elements out of your trailer when door is closed Ramp gate corner seal installs near door hinge for added protection Comes in one single piece and is trimmed for a custom fit Plastic scraper tool helps you get rid of any old weather stripping and adhesive before install Loctite super bonder 495 glue closes gaps in seal as you make trims for mitered corners Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Seal dimensions: 3/4" wide x 11/16" tall Made in the USA
Protect your enclosed trailer and its contents from damage by replacing worn out weather stripping. This kit includes the tools you need to replace seals around gates for toy haulers and car trailers.Features: Ramp gate seal kit weatherproofs toy and vehicle hauler gates 35' Half round seal keeps the elements out of your trailer when door is closed Ramp gate corner seal installs near door hinge for added protection Comes in one single piece and is trimmed for a custom fit Plastic scraper tool helps you get rid of any old weather stripping and adhesive before install Loctite super bonder 495 glue closes gaps in seal as you make trims for mitered corners Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Seal dimensions: 3/4" wide x 9/16" tall Made in the USA
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors of your RV or trailer Commonly found on Jayco Seismic, Octane, and Talon Trailer drop gates Also found on other doors, compartments, and hatches Recessed adhesive strip protects seal from collecting debris and gives a clean, finished look Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3/4" wide x 9/16" tall Made in the USA
... Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.These high-quality magnets ensure a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration. Silicon O-Rings Create Watertight Seal The EZ Connector trailer-end plug has a double O-ring that will create a watertight seal with the socket when it's inserted into the vehicle-end connector.
Prevent water from leaking into the doors and windows on your enclosed trailer with this D-shaped rubber seal. Durable foam rubber is water resistant. Adhesive back makes installation easy.Features: D-Shaped rubber seal is used to prevent water from leaking into the doors and windows on your enclosed trailer Durable foam rubber is water resistant Peel-and-stick installation with pre-applied adhesive backing Simply peel off the backing paper and apply the seal Dimensions: 25' long x 3/4" wide x 5/8" thick Made in the USA
Prevent water from leaking into the doors and windows on your enclosed trailer with this D-shaped rubber seal. Durable foam rubber is water resistant. Adhesive back makes installation easy.Features: D-Shaped rubber seal is used to prevent water from leaking into the doors and windows on your enclosed trailer Durable foam rubber is water resistant Peel-and-stick installation with pre-applied adhesive backing Simply peel off the backing paper and apply the seal Dimensions: 25' long x 1/2" tall x 3/8" deep Made in the USA
Replace your old and worn out weather stripping around your compartment doors before water damage creates a costly headache. This bulb seal installs onto 3/16" - 1/4" thick flanges. Flexible core keeps seal in place on rounded corners.Features: Rubber push-on seal is used for weatherproofing compartment doors of your RV or trailer Ideal for late 90's Fleetwood campers, the 2009 Fleetwood Pulse 24D basement utility compartments, and more Flexible core helps seam maintain its grip in rounded areas Easy installation - press onto 3/16" - 1/4" thick flanges around door openings Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3/4" wide x 5/8" tall Made in the USA
... Face-to-face contacts mean no bent or broken terminals. O-ring on lid makes a watertight seal.This high-quality magnet ensures a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration. Silicon O-Ring Creates Watertight Seal The lid on this trailer connector has a silicon O-ring that creates a watertight seal over the socket when the lid is closed. The EZ Connector trailer-end plug (sold separately) has a double O-ring that will create a seal when it's inserted into the connector.
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors of your RV or trailer Ideal for '60s Airstreams as well as Gullwing doors Commonly found on Winnebago Micro Minnie, Voyage, Minnie, and Spyder Trailer storage compartment doors Also found on Jayco Jay Flight and White Hawk Trailer outdoor kitchen compartment doors Replaces seal on Winnebago Spyder Trailer and Jayco Seismic Trailer rear drop gates Tabs help fill in the gaps to keep out the elements Recessed adhesive strip protects seal from collecting debris and gives a clean, finished look Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3/4" wide x 11/16" tall Made in the USA
... Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.These high-quality magnets ensure a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration. Silicon O-Rings Create Watertight Seal The EZ Connector trailer-end plug has a double O-ring that will create a seal with the socket when it's inserted into the vehicle-end connector.
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors and hatches of your RV or trailer Skirting around recessed adhesive protects connection from the elements Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 3/4" wide x 1/2" tall 3/4" Tall with tab Made in the USA
Replace your old and worn out weather stripping around your doors before water damage creates a costly headache. This bulb seal features a tab to improve weatherproofing around RV and trailer entrances.Features: Rubber seal is used for weatherproofing the doors of your RV or trailer Integrated tab improves surface contact to keep out the elements Tab faces toward the outside to fill in the gap Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame surrounding the slide-out Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3/4" wide x 3/4" tall Made in the USA Note: This seal should be installed with the tab to the outside to help keep the weather and pests out.
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors and hatches of your RV or trailer Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 10' long x 7/8" wide x 1" tall Made in the USA
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors of your RV or trailer Commonly found on Jayco Alante, Precept Motorhome, Jayco Seismic, North Point, Pinnacle, Eagle, and Eagle HT Trailer storage compartment doors Also found on some outdoor kitchen compartment doors Recessed adhesive strip protects seal from collecting debris and gives a clean, finished look Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3/8" wide x 9/32" tall Made in the USA
Replace your old and worn out weather stripping around your compartment doors before water damage creates a costly headache. This lip seal installs onto 3/16" - 1/4" thick flanges. Flexible core keeps seal in place on rounded corners.Features: Rubber push-on seal is used for weatherproofing compartment doors of your RV or trailer Commonly found on Jayco Seneca and Precept Motorhome and Jayco White Hawk Trailer storage compartment doors Flexible core helps seal maintain its grip in rounded areas Easy installation - Press onto 3/16" - 1/4" thick flanges around door openings Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 7/8" wide x 1/2" tall Made in the USA
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors and hatches of your RV or trailer Skirting around recessed adhesive protects connection from the elements Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 11/16" wide x 3/8" tall Made in the USA
Replace broken or worn-out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Peel-and-stick adhesive is pre-applied for an easy DIY installation.Features: Rubber ribbed seal replaces weather stripping on windows or doors on your RV Ribbed pattern funnels moisture and debris away to keep your seal lasting longer Peel-and-stick installation with pre-applied acrylic adhesive backing that sets in around 48 hours Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM rubber won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 50' long x 5/8" wide x 3/8" tall Made in the USA
14-1/4" Long x 1-1/8" wide x 7/8" deep; sealed, waterproof, 1-piece housing and lens; surface mount on 8-1/2" centers; 2-wire design; 3 red LEDs; red lens.Features: Red identification light for trailers more than 80" wide Long-lasting LEDs (light emitting diode) are great replacements for incandescent lights Multi-diode design optimizes light output No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power Sealed, waterproof, 1-piece, molded plastic housing and durable lens Compact size is perfect for mounting in tight spaces Corrosion resistant 2-Wire design - includes lead wire for power and ground wire DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Shape: rectangular Dimensions: 14-1/4" long x 1-1/8" wide x 7/8" deep Diodes: 3 Power draw: 0.020 amps at 12.8 volts Installation: surface mount on 8-1/2" centers Lifetime warranty on LEDs
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors of your RV or trailer Commonly found on doors, compartments, and hatches Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3/4" wide x 3/4" tall Made in the USA
Replace old and worn out weather stripping all around your RV before water damage creates a costly headache. Compact size makes this a universally useful seal for doors, windows, and hatches of RVs and trailers.Features: Universal rubber seal is used for weatherproofing the doors, windows, and hatches of your RV or trailer Textured ribbing improves surface contact to keep out the elements Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 20' long x 3/8" wide x 3/16" tall Made in the USA
This T-strap hinge is ideal for heavy-duty doors where the strap needs be installed over the door molding or seal. Narrow bracket makes it easy to mount in tight spaces. Polished stainless steel construction is rustproof and corrosion resistant.Features: Over-the-seal hinge is designed to bridge your door's molding or seal Gap in hinge strap provides 2-3/4" of clearance Narrow bracket allows hinge to be installed in tight spaces Hinge lets door swing open 180 degrees Strap provides prevents door from sagging and dragging Non-removable pin ensures maximum security to keep your cargo safe Prevents road vibration from knocking pin out of place Helps prevent tampering and removal of door Stainless steel construction is rustproof and corrosion resistant Polished finish gives it a sleek look Seam-welded bracket and leaf offer extra strength and support Made in the USA Specs: Overall hinge length: 14" Bracket dimensions: 4-1/2" tall x 1-1/4" wide Distance between mounting holes (center to center) 3-1/4" Mounting hole diameter: 3/8 Strap dimensions: 12" long x 2" wide Distance between mounting holes (center to center): 3-5/8" Mounting hole diameter: 5/16" Pin diameter: 1/2"
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors and hatches of your RV or trailer Skirting around recessed adhesive protects connection from the elements Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 9/16" wide x 5/16" tall Made in the USA
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.Features: Rubber seal is used for weatherproofing the doors and hatches of your RV or trailer Skirting around recessed adhesive protects connection from the elements Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 9/16" wide x 5/16" tall Made in the USA
Filters
