Keep your camper in tip-top shape with these slide-out supports. Extendable struts work in tandem to keep your slide out level and to prevent sagging and damage to your RV's extension tubes. ... Features: 2 Adjustable supports mount between the ground and the frame of your motor home's slide out Reduces slide-out sag Prevents damage to RV frame and extension tubes Quick-release handle for simple height adjustment Press button to release inner tube Pull tube up until U-channel bracket hits slide-out frame U-Channel brackets straddle frame member for secure positioning Heavy-duty steel construction Specs: Height: 26" - 47" U-Channel inside bracket width: 4-3/4" U-Channel outside bracket width: 5" U-Channel bracket height: 1-3/8" U-Channel front to back bracket length: 2-1/2" Quantity: 2 supports Combined weight capacity: 1,400 lbs Lifetime warranty
Keep your camper in tip-top shape with these slide-out supports. Extendable struts work in tandem to keep your slide out level and to prevent sagging and damage to your RV's extension tubes. ... Features: 2 Adjustable supports mount between the ground and the frame of your motor home's slide out Reduces slide-out sag Prevents damage to RV frame and extension tubes Quick-release handle for simple height adjustment Press button to release inner tube Pull tube up until U-channel bracket hits slide-out frame Turn handle to fine-tune U-Channel brackets straddle frame member for secure positioning Heavy-duty steel construction Specs: Height: 21" - 37" U-Channel inside bracket width: 4-3/4" U-Channel outside bracket width: 5" U-Channel bracket height: 1-3/8" U-Channel front to back bracket length: 2-1/2" Quantity: 2 supports Combined weight capacity: 1,400 lbs Lifetime warranty
Add extra support for your boat's V-8 motor and keep it safely balanced with this sturdy, 4-hole transom support plate. Die-cast aluminum alloy is strong and corrosion resistant.Features: Transom plate helps balance and distribute the weight of your boat's V-8 motor Also reduces stress on your boat's transom Die-cast, 1060 aluminum alloy is sturdy and resists corrosion Bolt-on installation with 4 pre-drilled holes Mounting hardware not included
... This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that function independently for simple leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Stabilizes with wide side supportbrackets Able to be used at the front of the trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Emergency hand crank included Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide Bracket length: 36" Lift: 30" Weight capacity: 6,000 lbs when extended to 30" Weight capacity when legs are extended to 15" is 3,000 lbs 3-Year warranty
Motorsupport toggle replaces one of the toggles on your transom saver motorsupport head. Fits the JIF Marine Tourney transom saver (315-FXK). ... Features: Replacement motorsupport toggle replaces one of the toggles on your transom saver motorsupport head Fits Tourney motorsupport (315-FXK) Nylon polymer construction is durable and corrosion resistant Dimensions: 4-1/8" long x 1-5/8" wide Quantity: 1 toggle
Motorsupport toggle replaces one of the toggles on your Jif Marine transom saver motorsupport head. Cast aluminum body is durable and offers superior corrosion resistance. ... Features: Replacement motorsupport toggle replaces one of the toggles on your transom saver motorsupport head Fits Jif Marine transom savers (315-FXJ, 315-FXH, and 315-FXI) Cast aluminum body is corrosion resistant Rubber grips provide strong hold without scratching your equipment Dimensions: 5" long x 2" wide Quantity: 1 toggle
Add extra support for your boat's outboard motor and keep it safely balanced with this sturdy, 2-hole transom support plate. Die-cast aluminum alloy is strong and corrosion resistant.Features: Transom plate helps balance and distribute the weight of your boat's outboard motor Also reduces stress on your boat's transom Die-cast, 1060 aluminum alloy is sturdy and resists corrosion Bolt-on installation with 2 pre-drilled holes Mounting hardware not included Length: 15"
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x 3" long x 1-3/4" tall Hole diameter: 3/8"
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.Features: L-shape brackets accommodate a variety of different roller lengths Mount to your boat trailer's frame or tongue Sturdy, 7-gauge galvanized steel construction resists corrosion Made in the USA Specs: Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft Diameter of mounting holes (each): 3/8" Quantity: 1 pair Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Marine motorsupportbracket protects your transom, motor, and steering components from shock and vibrations while towing. A spring-loaded head minimizes jolting. ... It fits around the lower portion of the motor. To get started, remove the pins in the support and telescope it out until it spans the area between the trailer-mounted bracket and your motor.
Motorsupportbracket protects your transom, motor, and steering components from shock and vibrations while you tow your boat. Spring-loaded head minimizes jolting. ... It fits around the lower portion of the motor. To get started, remove the pin in the support and telescope it out until it spans the area between the trailer-mounted bracket and your motor.
Marine motorsupportbracket is designed to protect your transom, motor, and steering components from shock and vibrations while you tow your boat. ... It fits around the lower portion of the motor. To get started, remove the pin in the support and telescope it out until it spans the area between the trailer-mounted bracket and your motor.
Marine motorsupportbracket is designed to protect your transom, motor, and steering components from shock and vibrations while you tow your boat. ... It fits around the lower portion of the motor. To get started, remove the pin in the support and telescope it out until it spans the area between the trailer-mounted bracket and your motor.
Durable bracketsupports the center of your tandem-axle fender. Bolts onto the I-frame of your trailer and the underside of your fender. Aluminum material is rustproof and corrosion resistant. ... Features: Bracket provides support at the center of your tandem-axle fender Simple installation Bolt 1 end onto your trailer's I-frame Bolt other end onto the underside of your fender Aluminum material is rustproof and corrosion resistant Great for freshwater and saltwater use Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Dimensions: 15" long x 2" wide Mounting hole diameter: 7/16" Plate thickness: 1/4" Rustproof Aluminum Construction Aluminum offers excellent, long-term defense against rust and corrosion, making it great for saltwater applications.
Durable bracketsupports the center of your tandem-axle fender. Bolts onto the I-frame of your trailer and the underside of your fender. Aluminum material is rustproof and corrosion resistant. ... Features: Bracket provides support at the center of your tandem-axle fender Simple installation Bolt 1 end onto your trailer's I-frame Bolt other end onto the underside of your fender Aluminum material is rustproof and corrosion resistant Great for freshwater and saltwater use Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Dimensions: 17-1/16" long x 2" wide Mounting hole diameter: 7/16" Plate thickness: 1/4" Rustproof Aluminum Construction Aluminum offers excellent, long-term defense against rust and corrosion, making it great for saltwater applications.
... 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Electric motor is an upgrade from manual methods Allows the lead and follow legs to work together at a faster rate Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Toggle switch will be right at home with your "current" electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are located on the side facing toward your trailer frame - outside mount Hardware and additional mounting brackets are included if you need them Specs: Weight capacity: Single motor: 2,500-lbs per leg Dual motor: 5,000-lbs per leg Total lift: 34-3/4" Screw travel : 19-3/4" Drop leg travel : 15" Overall outer tube length: 33-1/2" Outer tube width: 2-1/2" Distance between weldstops: Inside to inside: 19-1/2" Outside to outside: 21-1/2" Rate of travel: 2-1/2" per minute Extendable cross shaft: Minimum: 41" Maximum: 72-3/4" 360 Watt DC motor Volts: 12 Amps: 30 Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
... 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting cross shaft extends to fit your application Electric motor is an upgrade from manual methods Allows the lead and follow legs to work together at a faster rate Drop leg reduces time spent cranking, adjusting, or holding buttons Upgrading to plunger pins (LG-119113 - sold separately) would eliminate fiddling with cage pins Toggle switch will be right at home with your "current" electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are facing the opposite leg - inside mount Hardware and additional mounting brackets are included if you need them Specs: Weight capacity: Single motor: 2,500-lbs per leg Dual motor: 5,000-lbs per leg Total lift: 34-3/4" Screw travel : 19-3/4" Drop leg travel : 15" Overall outer tube length: 33-1/2" Outer tube width: 2-1/2" Distance between weldstops: Inside to inside: 19-1/2" Outside to outside: 21-1/2" Extendable cross shaft: Minimum: 41" Maximum: 72-3/4" 360 Watt DC motor Volts: 12 Amps: 30 Note: The distance between weld stops should match up with the mounting brackets already on your trailer frame.
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.The concave footpad reduces movement and provides greater stability than large, convex footpads. Easy Installation The included mounting brackets are used to attach the jacks to each corner of your camper. The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.The concave footpad reduces movement and provides greater stability than large, convex footpads. Easy Installation The included mounting brackets are used to attach the jacks to each corner of your camper. The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
... This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that function independently for quick, simple leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Stabilizes with wide side supportbrackets For use on rear frame of pulled travel trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Switches and emergency hand crank included Switch harness has 10-gauge wires Sturdy steel construction Specs: Application: trailers and RVs with frames from 42" to 77" wide Requires 24" of space on the frame of your trailer or RV Lift: 22" Weight capacity: 6,000 lbs 3-Year warranty
Stabilize and level your travel or 5th-wheel trailer with this unique device. Designed to span the width of your rig for maximum support, the opposing sides of this stabilizer can be adjusted independently for effective leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Not recommended for use on front of motorized vehicle Stabilizes with wide side supportbrackets Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Hand crank attaches for manual operation Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide Lift: 30" Bracket width: 36" Weight capacity: 6,000 lbs 3-Year warranty
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. ... Features: Takes the effort out of raising, lowering, and leveling your 5th-wheel trailer Easily fine-tune your 5th-wheel's height and level Independently operate each jack Distributes weight capacity between two legs to let you level your camper more efficiently Simplifies leveling on soft or uneven camping grounds More adjustable - each leg has its own weather-proof toggle switch More agile - reduces the risk of your trailer frame bending and twisting Creates more headroom in your cargo hold by eliminating the cross shaft Prevents the legs from extending past their limit - clutch inside each motor Offers excellent stability and support Extra-large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Requires welding new brackets to install 3 Weld stops on 3 sides of the outer tubing - universal mount Mounting brackets and hardware included Specs: Combined weight capacity: 12,000 lbs Total lift: 38" Screw travel: 21" Drop leg travel: 17" Overall length (including motor): 36-1/2" Overall outer tube length: 24-1/4" Outer tube width: 2-1/2" Distance between weld stops (outside to outside): First to second: 13-1/2" First to third: 19-1/8" Second to third: 5-5/8" Bracket height: Retracted: 36" Extended: 74" Hanger width: 2" Rate of screw travel: 1" every 15 seconds Footplate dimensions: 8" long x 5-3/4" wide 6-Year warranty Notes: Toggle switches are not IP-rated and should be installed away from propane tanks.
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 4 Precise, motorized jacks can be operated by either the included touchpad. Hitch recognition memory function offers simple hookup.These jacks use sensors to measure the number of motor revolutions per minute instead of amp draw. This allows for more precise control over the motor than you'd have with conventional motorized jacks, which results in more accurate leveling of your trailer.
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 6 Precise, motorized jacks can be operated by either the included touchpad or a Bluetooth compatible app on your smartphone.These jacks use sensors to measure the number of motor revolutions per minute instead of amp draw. This allows for more precise control over the motor than you'd have with conventional motorized jacks, which results in more accurate leveling of your trailer.
Filters
