CE Smith Support Bracket for Tandem Axle Fenders - 17-1/16" Long - Aluminum - Qty 1

Video Transcript for Review of CE Smith - Trailer Fenders - CE26238

Today we're going to take a look at the CE Smith support bracket for tandem axle fenders. This is going to measure 17 and 1/16 inch long. It is going to have an aluminum construction. Now this is going to be a great support beam for your tandem axle fender. It is going to provide that extra support to make sure nothing bounces around and causes any damage. It's going to be a pretty install.

Although the hardware is sold separately so you're going to have to pick that up on your own. But basically one end is going to bold on to the I-beam of your trailer, the other end mounts to the center of the underside of your fender.Again, so it has an aluminum construction. It's going to be really good for marine trailers, where you're going to be going in and out of the water. This is going to work for salt water, fresh water. Basically any time you have to have it in those wet conditions, we won't have to worry about any rust or corrosion with this bracket.

Now as far as the dimensions, it is going to measure 17 and 1/16 inch long. That is going to be the width from the outside edge of the bracket. The distance between our mounting holes is going to be about 15 and 1/2 inches.The mounting hole diameter itself is going to be 7/16. The width of the bracket is going to be two inches wide, and it's going to be about a quarter of an inch thick. That's going to do it for our look at the CE Smith support bracket for tandem axle fenders..