7-7/16" x 1-5/8" Rectangular, surface-mount load ramp light with 4 LEDs produces a bright white beam to illuminate a wide area. Powder coated black aluminum housing resists impact and corrosion. ... Features: Rectangular, LED light emits a powerful white light so you can easily see your ramp while loading Aluminum construction and built-in heat sink protect against overheating Black powder coat resists corrosion LEDs are energy efficient, long-lasting, and vibration resistant Surface mount unit installs with 2 screws (not included) Hardwires to your application 12V compatible Specs: Overall dimensions: 7-7/16" wide x 1-5/8" tall x 1-3/4" thick Light output: 2,000 lumens Diodes: 4 Input voltage: 9V - 30V Power draw at 12V: 1.3 amps - 1.9 amps Wire length: 9" IP rated: 68 Limited lifetime warranty
An over 80" ID bar and white loadlight built into one housing. Keep wide trailers properly marked on the road or switch on bright white light for backing into tight spots, loading equipment, or setting up at camp after dark.Over 80" ID Bar And Load Lamp: Red/white combo keeps wide trailers marked and lights up the work area. Add 500 Lumens Of Work Light: White LEDs provide usable light for backing, loading, and campsite tasks.
Swap worn springs with this CE Smith 24-5/8" slipper leaf spring. Built to handle 250-lb loads, it's perfect for light-duty trailers. Features 1-leaf steel construction, 1-3/4" width, and eye-radius end for 1/2" shackle bolt fit.Features: Replace a worn or broken trailer spring with this CE Smith slipper-style leaf spring Great fit for small trailers hauling lightloads up to 250 lbs Slipper design with eye-radius end installs with 1/2" shackle bolt (sold separately) Measures 24-5/8" from center of eye to end of slipper for easy size matching Single-leaf spring is 1-3/4" wide and 4-1/2" tall for reliable low-profile support Durable steel construction resists flex fatigue and road wear Weighs just 4 lbs - light enough for easy install, strong enough for steady towing Specs: Quantity: 1 leaf spring Spring capacity: 250 lbs Axle capacity: 500 lbs Length from center of spring eye to end of spring (unloaded): 24-5/8" Spring width: 1-3/4" Eye diameter: 1/2" Leaf thickness: 3/8" Number of leaves: 1 End style: Eye-radius Spring weight: 4 lbs
This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and female PL-3 plug on the other end.And this is what leads to hyperflashing. This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing by mimicking the power draw of an incandescent light.
This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and a pigtail connection on the other end.And this is what leads to hyperflashing. This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing by mimicking the power draw of an incandescent light.
Guard against LED-related turn signal problems with these load-resistors. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.This fast flashing is similar to what your factory signal light does when the bulb is about to burn out. To prevent this phenomenon, install a load-resistor kit along with your new LEDs. Each load resistor will build additional resistance in the line to correct the flash timing of the bulb, resulting in a properly functioning indicator.
Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.Because LED bulbs have little resistance on their own, they create a "hyperflash" situation when used in turn signals. This fast flashing is similar to what your factory signal light does when the bulb is about to burn out. To prevent this phenomenon, install a load-resistor kit along with your new LEDs. This kit will build additional resistance in the line to correct the flash timing, resulting in a properly functioning indicator.
Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.Because LED bulbs have little resistance on their own, they create a "hyperflash" situation when used in turn signals. This fast flashing is similar to what your factory signal light does when the bulb is about to burn out. To prevent this phenomenon, install a load-resistor kit along with your new LEDs. This kit will build additional resistance in the line to correct the flash timing, resulting in a properly functioning indicator.
17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Dark outdoor areas stay unevenly lit, leaving shadows that hide obstacles and limit what you can see. This telescoping 2,000-lumen LED raises light up to 10 feet for wide overhead coverage, so you can clearly see and work across a large area.Stable Tripod Setup: Spring-loaded legs and included ground stakes keep the light positioned during outdoor use. Features to know about Wide Overhead Light Coverage Dark campsites, driveways, and outdoor work areas can leave shadows where gear and obstacles disappear.
Dark campsites leave large areas unevenly lit, with shadows hiding obstacles and work surfaces. This telescoping LED lantern lifts a 4,000 lumen light up to 10 feet for wide overhead coverage, so you can see clearly and work across the entire area.Tripod Setup with Case Stays Organized in the Field Portable area lights lose their advantage when the stand, stakes, and cords end up scattered between trips. This setup includes a heavy-duty tripod base with spring-loaded legs, tripod ground stakes that store in the tripod feet, and an EVA molded foam protective case with waterproof zipper.
Dark campsites leave large areas unevenly lit, with shadows hiding obstacles and work surfaces. This telescoping LED lantern lifts a 1,200 lumen light up to 9 feet for wide overhead coverage, so you can see clearly and work across the entire area.This setup includes a heavy-duty tripod base with spring-loaded legs, lantern, and a nylon carry bag. Everything packs together for transport and storage, so you can deploy the full light setup and pack it back out without hunting for loose parts.
Designed for smaller utility and camping trailers. Hollow rubber springs sit above the axle, helping to stabilize and level the trailer while also absorbing road shock. Sway is reduced and trailer tracking behind the vehicle is improved.The inch of clearance allows the existing factory suspension to operate normally under lightloads and standard terrain, ensuring the smooth, comfortable ride you are used to. Timbren Suspension Enhancement Systems are designed to work progressively.
Use integrated switch or wire to a light switch to turn this double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... Effective Lumens Lumens are utilized to measure the actual amount of light that you can see and use from a light source. If you need a super bright light for a workspace, you will want to go with a light that has a higher lumen count.
You're loaded up after dark and rolling out. This light handles the signaling and keeps your plate visible. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Passenger-side light (TN62XR) and wiring sold separately.
You're loaded up after dark and rolling out. This light handles the signaling when and where it matters. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Driver-side light (TN42XR) with license light sold separately.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle. All Signal Functions: Stop, turn, and tail lights provide everything you need for towing. Great for Temporary Use: Ideal for flat towing or when trailer lights aren't working.
Change this light strip's color patterns or play your favorite songs wirelessly using a free smartphone app. You can shorten the weatherproof light strip for a custom fit underneath a smaller RV awning, in a bedroom closet, or on a boat.Or perhaps you need extra light to load and unload gear from a box truck or enclosed trailer after dark? This LED light gives you bright light inside or outside your RV, utility trailer, pontoon boat, service truck, or garage.
Change this light strip's color patterns or play your favorite songs wirelessly using a free smartphone app. You can shorten the weatherproof light strip for a custom fit underneath a smaller RV awning, in a bedroom closet, or on a boat.Or perhaps you need extra light to load and unload gear from a box truck or enclosed trailer after dark? This LED light gives you bright light inside or outside your RV, utility trailer, pontoon boat, service truck, or garage.
Use integrated switch or wire to a light switch to turn this double dome light on and off. Included 2 incandescent bulbs are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim, old lights in your enclosed trailer? This incandescent dome light gives you warm, yellow light underneath a kitchen cabinet, in a walkway, or inside your pop-up camper.
Use integrated switch or wire to a light switch to turn this single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... Effective Lumens Lumens are utilized to measure the actual amount of light that you can see and use from a light source. If you need a super bright light for a workspace, you will want to go with a light that has a higher lumen count.
Use integrated toggle switch or wire to a light switch to turn this double dome light on and off. Included 2 incandescent bulbs are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim, old lights in your enclosed trailer? This incandescent dome light gives you warm, yellow light underneath a kitchen cabinet, in a walkway, or inside your pop-up camper.
Water-resistant utility light brightens up your enclosed trailer for unloading gear after dark or the outside of your RV for those warm summer barbecue nights with the family. ... Features: Utility light is perfect for an exterior RV awning setup or inside an enclosed trailer Included energy-efficient, cool white LEDs last longer and burn brighter than incandescent bulbs Clear plastic lenses is less likely to shatter than a glass lens Textured pattern helps disperse bright light throughout your trailer Durable, black plastic construction is water resistant Bolt-on installation onto the an interior or exterior surface - hardware not included Wires to a light switch inside your RV or trailer - white for ground and black for power Specs: Overall dimensions: 8" long x 1-1/4" tall x 1" deep Mounting hole spacing (center to center): 6-11/16" Voltage: 12V DC Wattage: 6 watts Number of LEDs: 30 1-Year warranty Need extra light to load and unload gear from a box truck or enclosed trailer after dark?
Use the integrated switch or wire to a light switch to turn the single dome light on and off. Included incandescent bulb and acrylic lens are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim old lights in your horse trailer? This dome light gives you bright yellow, incandescent light underneath a kitchen cabinet, in a walkway, by a workbench, or inside your enclosed trailer.
Filters
