Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The finish holds up through repeated raising and lowering, so the jack stays functional instead of locking up when you need it. Specs Capacity and Lift: Maximum capacity: 2,000 lbs Maximum travel: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Operation: Handle: sidewind, fold-down for power drill access Drill adapter: 3/4" integrated nut and 3/4" socket included Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drill operation Warranty: Limited lifetime SnapPad JackStand Pad: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs Warranty: 2-Year Included Components: etrailer Manual Sidewind Trailer Jack w/ Drill Adapter - A-Frame - 14" Lift - 2K Replacement Pad for SnapPad JackStand Pad System - 6 Round Jack Foot
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 9" round jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 9" round jack foot Diameter: 11" Weight: 5 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 11-1/2" and 12" round jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 11-1/2" or 12" round jack foot Diameter: 13-3/4" Weight: 8.4 lbs 2-Year limited warranty
Replaces 6 pads for your SnapPad jackstand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. 4 Pads fit 9" round jack feet. 2 Pads fit 11-1/2" or 12" round jack feet.Features: Replaces 6 pads for your SnapPad jackstand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Total quantity: 6 pads 4 pads Application: 9" round jack feet Diameter: 11" Weight per pad: 5 lbs 2 Pads Application: 11-1/2" or 12" round jack feet Diameter: 13-3/4" Weight per pad: 8.4 lbs 2-Year limited warranty
Replaces 4 pads for your SnapPad jackstand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. Fits 9" round jack feet.Features: Replaces 4 pads for your SnapPad jackstand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Quantity: 4 pads Application: 9" round jack feet Diameter: 11" Weight per pad: 5 lbs 2-Year limited warranty
Increase the surface area of your camper's leveling jack foot to help prevent sinking and to get added stability. Durable rubber pad easily and permanently snaps into place.Features: Heavy-duty rubber pad snaps onto the foot of your camper jack for extra stability Prevents sinking into soft ground Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal foot from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Helps dampen vibration from inside camper that could cause shifting Built-in drains release moisture to prevent jack foot from corroding Simple, one-time installation Line up the pad beneath your jack's foot and lower the foot until the lip on the pad fully engages and locks in place Made in the USA Specs: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 10" octagonal or round concave jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 10" octagonal or round concave jack foot Diameter: 13-1/4" Weight: 8.9 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 10" round jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 10" round jack foot Diameter: 11-3/4" Weight: 5.6 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 8" square jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 8" square jack foot Diameter: 11-1/2" Weight: 5.4 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 8" round jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 8" round jack foot Diameter: 10" Weight: 3.8 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 7" square jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 7" square jack foot Diameter: 9" Weight: 3 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jackstand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 5-1/2" square jack foot.Features: Replaces 1 pad for your SnapPad jackstand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 5-1/2" square jack foot Diameter: 8-1/8" Weight: 3 lbs 2-Year limited warranty
The hydraulic bottle jack lifts, holds, and locks vehicles in place without jackstands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.After you have the vehicle lifted to the desired height, the jack will automatically lock into place. The Unijack will then double as a jackstand to support the lift. To unlock the jack, simply turn the lever at the base of the piston counterclockwise and the hydraulics will slowly move in a downward motion.
StayPut jackstand pad helps to distribute the weight of your jacks and stop them from sinking. EZ grip handle and handy storage strap. Lightweight and UV stabilized.Features: StayPut jackstand pad improves the distribution of weight on your jacks Helps to prevent sinking Great for use under trailer tongue, trailer jack, and awning support legs Handy storage strap EZ grip handle Lightweight UV stabilized Pad dimensions: 13-7/8" long x 11-7/8" wide x 3/4" tall
... Always use jackstands in pairs for safety.Features: Position these 2-ton jackstands under your vehicle at the manufacturer-indicated load support points Adjusting the height is easy with the ratchet-style lifting mechanism Hold control lever up while lifting the saddle shaft to your desired height Push control lever down to lock pawl into teeth located in center column Carefully lower vehicle to desired height Specs: Capacity: 2 tons Lift height measurements: Minimum height: 10-3/4" Maximum height: 16-3/4" Base dimensions: 6-11/16" long x 6-15/16" wide Quantity: 2 jacks 1-Year limited warranty Note: Always use jacks in pairs.
Minimize the amount of cranking needed to position your jack, and eliminate the need for wood or cinderblocks when storing your trailer. Jackstand provides a sturdy platform that evenly distributes your trailer weight.Features: Jackstand provides a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Wide, round base helps to distribute weight of trailer to prevent sinking into soft ground Light weight makes it easy to move and store Durable polyethylene construction Distinctive red color catches your eye Specs: Weight capacity: 5,000 lbs Dimensions: 8-5/8" diameter x 8-3/8" tall Note: Not designed to be used with trailer jacks with wheels or casters.
StayPut jackstand pad helps to distribute the weight of your jacks and stop them from sinking. EZ grip handle and handy storage strap. Lightweight and UV stabilized.Features: StayPut jackstand pads improve the distribution of weight on your jacks Helps to prevent sinking Great for use under trailer tongue, trailer jack, and awning support legs 4 Rubber feet provide extra gripping power Handy storage strap keeps things organized when put away EZ grip handle gives you a perfect handhold Lightweight, UV stabilized polymer construction resists sun damage Pad dimensions: 6" long x 6" wide x 3/4" tall
Eliminate the need for wood or cinderblocks when leveling your trailer. Camco's trailer tongue jackstand provides a sturdy platform that evenly distributes your trailer weight and prevents slipping. The UV-stabilized jack can support 5,000 lbs.Features: Evenly distributes the weight of the tongue Eliminates the need for bulky blocks of wood or cinderblocks 5,000 lb weight rating Durable, UV stabilized resin Lightweight and easy to store Made in the USA Note: Not designed to be used with trailer jacks with wheels or casters. 44635 Camco Trailer Tongue JackStand - 5,000 lbs
Get set up fast and work with confidence. This 2-ton trolley jack and ratcheting jackstands combo rolls into place on swivel casters, lifts to 13", and locks between 10-3/8"-16-3/8" for routine service at home.Features: 2-Ton trolley jack and jackstands combo - 4,000-lb capacity Steel lifting arm with tough enamel finish Swivel casters for easy positioning Lightweight design for fast placement Ratcheting jackstands with 10 lock-safe settings Jackstand height range: 10-3/8" to 16-3/8" Great for cars and light-duty trucks 1-year warranty Specs: Capacity: 2 tons Jack low height: 5-1/8" Jack maximum height: 13" Jack lift range: 7-7/8" Jackstand adjustment range: 10-3/8" to 16-3/8" Warranty: 1 year
Adapter lugs let you attach your JT's Strong Arm stabilizers to hydraulic jacks. Can be welded or bolted onto the round footpads of your landing gear.Features: Adapter lugs let you attach the feet of your hydraulic landing gear jacks to your JT's Strong Arm stabilizers Each lug allows for attachment of 1 stabilizer Weld-on or bolt-on installation Lugs attach to the round footpads on your landing gear 2 Lugs and mounting bolts included 1-Year warranty
Adapter kit lets you attach your JT's Strong Arm stabilizers to electric landing gear jacks. Bolts onto the round footpads of your landing gear. ... Features: Adapter kit lets you attach the feet of your electric landing gear jacks to your Lippert Components JT's Strong Arm stabilizers Plates mount on either side of jack to allow for installation of swing bolts Bolt-on installation Includes 4 jack pad adapter plates 1-Year warranty
Install a Fulton F2 jack onto your trailer's existing Fulton XP10 or XP15 jack mount. Simply bolt this adapter plate onto your welded-on mount. Sharkskin finish resists corrosion. 1/2" Pull pin hole.Simply remove your old jack from the XP mount and bolt on this adapter plate in its place with the included hardware. Installation To install the Fulton jackadapter kit, first you will need to use a 3/4" wrench to remove the locknut from your existing XP jack swivel assembly.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb swivel jack uses a drill adapter so the lift happens without the handle. It pivots up for clearance, and the SnapPad stays planted on soft ground.The finish holds up through repeated raising and lowering, so the jack stays functional instead of locking up when you need it. Specs Capacity and Lift: Maximum capacity: 2,000 lbs Maximum travel: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Mount Type: Swivel bolt-on Operation: Handle: sidewind, fold-down for power drill access Drill adapter: 3/4" integrated nut and 3/4" socket included Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drill operation Warranty: Limited lifetime SnapPad JackStand Pad: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs Warranty: 2-Year Included Components: etrailer Manual Sidewind Trailer Jack w/ Drill Adapter - A-Frame - 14" Lift - 2K Replacement Pad for SnapPad JackStand Pad System - 6 Round Jack Foot
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
Filters
