Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use.If the outer tube is less than 10" from the ground, then use a flip-up jack with a 4" extension (FA88-00-4500 - sold separately) instead.
Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use.If the outer tube is more than 10" from the ground, then use a flip-up jack with a 6" extension (FA88-00-6500 - sold separately) instead.
Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks to give you additional clearance needed for dually pickup trucks. ... Features: Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks Works with electric or manual HappiJac camper jack systems (LC736514-4, LC736514-ELKIT, LC736515-4 or LC736515-ELKIT) Includes 2 brackets and installation hardware Made in the USA
The Quick Foot makes it fast and easy to raise and lower your tongue jack. Drop it and pin it to gain up to 6" of trailer tongue height. Sturdy steel construction with 7" diameter footplate for stability.Features: Extender lets you quickly raise or lower your tongue jack Fits most standard tongue jacks (manual and electric) with 2" diameter inner tubes Extends 2", 4", or 6" Steel construction with corrosion-resistant zinc plating 7" Diameter footplate provides stability and resists "sinking in" 5,000-lb Tongue rating means extender can be used on any production travel trailer Extender slides up the tongue jack for easy storage Made in the USA Limited lifetime warranty
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift.
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.The included extensions attach to add extra clearance, so you don't have to carry around blocks and stack them to get the jack where it needs to be.
If a tire gives out on your camper, you need a jack that handles the weight. The Tallboy combines compact size with 12-ton lift capacity and provides some serious lift. And the oversized base plate helps with stability on rough ground.The included extensions attach to add extra clearance, so you don't have to carry around blocks and stack them to get the jack where it needs to be.
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The large base plate gives you a solid foundation on the trail. It packs away to about one cubic foot when stored.The included extensions attach to add extra clearance, so you don't have to carry around blocks and stack them to get the jack where it needs to be.
Drop leg adds 8" of additional lift for your etrailer or Ram A-frame jack with a 2" diameter inner tube. Extension can be adjusted in 2" increments. Corrosion-resistant, zinc-plated finish. Pin and clip included.Features: Drop leg increases overall extension by 8" for maximum adjustability Works with etrailer and Ram 2,000 lb topwind or sidewind jacks Also works with 5,000-lb topwind jack TJA-5000-B Zinc-plated finish resists corrosion Includes pin and clip Specs: Footplate diameter: 5-1/4" Tube diameter: 1-3/4" Height: 13-1/4" from bottom of foot to top of tube 2" From center of hole to center of hole Pin diameter: 3/8" 1-Year warranty
Replacement jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Welds on.Features: Replaces 1 Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Welds on Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Quantity: 1 leg 1-Year warranty
Replacement left/curb side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the left-side Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and right leg (e73VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Bolts on using built-in, pre-drilled mounting tabs Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Mounting tabs: 7-1/2" x 4" Quantity: 1 leg 1-Year warranty
Replacement right/street side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the right-side RAM square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and left leg (e63VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Bolts on using built-in, pre-drilled mounting tabs Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Mounting tabs: 7-1/2" x 4" Quantity: 1 leg 1-Year warranty
Drop leg adds 4-1/2" of additional lift for your Lippert Components power jack (LC285318) with 2" diameter inner tube. Extension can be adjusted in 1-1/2" increments. Corrosion-resistant, zinc-plated finish.Features: Drop leg increases overall extension by 4-1/2" for maximum adjustability Works with Lippert Components power tongue jack (LC285318) with 2" diameter inner tube Zinc-plated finish resists corrosion Specs: Footplate diameter: 9" Tube diameter: Outer: 1-11/16" Inner: 1-3/8" Height: 8-11/16" from bottom of foot to top of tube 1-1/2" From center of adjustment hole to center of adjustment hole
... The extension screw provides additional lift height.Features: Raises, lowers, and stabilizes high profile vehicles, house foundations, and heavy equipment Great for garages, shops, or to keep as a spare in your vehicle Extension screw provides additional lift height Handle locks into place to assure a secured upright position Pin-style release valve allows for easy operation Steel saddle and heavy-duty cast handle socket Durable storage case is included Meets ASME standards Specs: Weight capacity: 20 tons Lift: 9-11/16" - 17-5/8" Base dimensions: 6" long x 5-1/2" wide 1-Year warranty Note: This jack is designed to lift and stabilize 20 tons and should not be used to lift over that weight.
This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of travel and 4-1/2" of extension with the drop leg. ... On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift.
You pull in after a long drive, the ground looks fine, and you don't want to wonder if the jack will sink or a block will shift once everyone steps inside. This kit puts a wide drop leg and SnapPad under your jack, giving it a solid, steady base.Eliminates Block Stacking: Replaces loose wood or plastic blocks under the tongue jack. Fits Common A-Frame Jacks: Designed for 2" inner tube jacks with a V-groove. Protects the Ground You Park On: Rubber pad keeps the metal foot off concrete and asphalt.
Replaces the passenger's-side swing-out bracket for your HappiJac truck camper jack system. Works with both electric (LC736514-ELKIT or LC736515-ELKIT) and manual truck camper jack systems (LC736514-4 or LC736515-4).Features: Replaces the passenger's-side swing-out bracket for your HappiJac truck camper jack system Works with both electric (LC736514-ELKIT or LC736515-ELKIT) and manual truck camper jack systems (LC736514-4 or LC736515-4) Fits: HappiJac electric, truck camper jack systems: LC736514-ELKIT and LC736515-ELKIT HappiJac manual, truck camper jack systems: LC736514-4 and LC736515-4
... Heavy-duty jack screw can lift up to 5 tons.Features: Easy-to-use foot lever faces the front - no more bending, squatting, or muddy knees Use the drop leg completely hands-free Drop leg extension makes up about half of the total travel Works best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Black powder coated finish on inner and outer tubes Footplate minimizes sinking in soft ground Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes footplate, handle, and connecting pin Specs: Lift capacity: 12,000 lbs Support capacity : 20,000 lbs Total travel: 26-1/2" Screw travel : 13-1/2" Drop leg travel : 13" Overall height (from bottom of foot to top of jack): Retracted: 29-1/2" Extended: 56" Outer tube width: 4-3/8" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 2-1/2" on center Jack screw diameter: 1-1/4" 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Replace the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system. Dual-action system powers both up and down. Reservoir has 4-qt capacity. Includes remote control.Features: Replaces the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system Powers jack both up and down Includes remote control with 12' cord Works with 12V DC RV/marine trailer battery (not included) Specs: 1.6KW 12V DC motor Reservoir capacity: 4 quarts Working pressure: Extension: 3,200 psi Retraction: 1,500 psi Dimensions: 16" long x 7-1/8" wide x 8-1/8" tall
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Total travel: 28-3/4" Screw travel : 15" Drop leg travel : 13-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Easily-to-reach side-facing plunger pin deploys the drop leg Works best for setups where the jack is located behind the A-frame Spring return retracts the drop leg hands-free Drop leg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Heayv-duty internal compotents Durable 1" jack screw allows for heavy lifting Smooth screw travel - a second thrust bearing reduces friction and heat buildup Weather-resistant black painted inner and outer tubes Easy to maintain even in a long life of hard work Grease zerk fittings help keep gears working smoothly Footplate minimizes sinking in soft ground Weld-on installation Includes sidewind handle Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 25-3/4" Screw travel : 12-1/4" Drop leg travel : 13-1/2" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Diameter mounting hole Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Filters
