Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Rub marks, squeaks, or crooked loading? A swivel bolster adds a little pivot so the bunk sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Use one to replace a failed bracket, or grab a set and reset your bunks so loading feels smooth and predictable again. Specs Application Quantity: 1 bracket Dimensions and Weight Overall dimensions: 10" long x 2-1/2" wide x 1" tall Slot length: 2-3/4" Weight: 1.31 lbs Material Material: galvanized steel Color: silver General Warranty: 1-year limited
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, overslung axle - springs sit over axle For tandem axle applications, use 2 kits Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2" Limited lifetime warranty 30-Day satisfaction guarantee Note: Does not work with spring plates wider than 4-1/4".
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 500 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 4" tall x 4" diameter Compresses up to 70 percent of original height with full memory rebound Required clearance between top of spring pack and bottom of trailer frame: 6" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 7-7/16" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 9" Dimensions of bolster bracket: 8" tall x 2-1/2" wide Mounting slot dimensions: 2-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Easily raise or lower your boat trailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.Features: Heavy-duty bracket holds a bow stop to protect your winch Designed to fit around a 3-1/2" wide winch Can also be mounted alone on winch stand Accepts 3" - 4" bow roller or Y-stop Bolt-on installation Does not include mounting hardware Sturdy, 11-gauge pre-galvanized steel construction Can be primed and painted to provide even more resistance to corrosion and to match your trailer's paint finish Made in the USA Specs: Quantity: 1 bracket Dimensions: Height: 13-3/16" Inside width: 3-11/16" Outside width: 3-15/16" Typically found on winch stands mounted on trailer tongues, bow roller brackets position a bow roller or Y-stop in front of the winch to prevent the boat's bow from making contact with the winch.
Built for mounting a bunk board on your boat trailer, this rust-resistant bunk bracket allows the bunk to pivot when you're loading your boat. Slotted mounting hole lets you adjust the bunk height. Use 2 brackets for each board.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Allows your trailer's bunk board to pivot while you load your boat Stabilizes your bunk when 2 brackets are used (additional bracket sold separately) Slotted mounting hole lets you adjust the height during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Dimensions: 2" wide x 11-3/4" tall x 1-1/2" thick
Replace the bow roller assembly on your boat trailer with this durable polyvinyl chloride roller kit. Includes a 3" roller, 2 end bells, and corrosion-resistant hardware. Non-marring material will not leave marks on your boat.Features: Bow roller assembly replaces the bow roller, end bells, shaft, and hardware on your boat trailer Eases loading and unloading of your boat Supports the front of your boat as it rests on your trailer Absorbs road shock while your boat is being towed End bells ensure that your boat does not scrape along bolts or roller bracket Polyvinyl chloride (PVC) construction is durable, non-marring, and corrosion resistant Stronger and longer lasting than rubber Won't leave scratches, scuffs, or marks on your boat's hull Works great in freshwater and saltwater Zinc shaft and hardware with zinc finishes are corrosion resistant Amber color Specs: Application: 3" wide center roller bracket Dimensions (with bells): 6" long x 4-1/8" diameter Shaft diameter: 1/2" PVC Construction Polyvinyl chloride (PVC) is a sturdy material that is great for use on marine trailers.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolster bracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Replace your bow roller assembly with this complete kit. Includes a 4" roller, 2 end bells, and corrosion-resistant hardware. Black TPR material is stronger than rubber and softer than polyurethane.This complete bow roller assembly includes 1 roller with 2 matching end bells, plus the hardware you need to mount them on your trailer. Simply attach the assembly to the existing bracket on your boat trailer and you're all set! The TPR construction provides ultimate durability and strength over standard rubber rollers.
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x 3" long x 1-3/4" tall Hole diameter: 3/8"
Replace the bow roller assembly on your boat trailer with this durable polyvinyl chloride roller kit. Includes a 4" roller, 2 end bells, and corrosion-resistant hardware. Non-marring material will not leave marks on your boat.Features: Bow roller assembly replaces the bow roller, end bells, shaft, and hardware on your boat trailer Eases loading and unloading of your boat Supports the front of your boat as it rests on your trailer Absorbs road shock while your boat is being towed End bells ensure that your boat does not scrape along bolts or roller bracket Polyvinyl chloride (PVC) construction is durable, non-marring, and corrosion resistant Stronger and longer lasting than rubber Won't leave scratches, scuffs, or marks on your boat's hull Works great in freshwater and saltwater Zinc shaft and hardware with zinc finishes are corrosion resistant Amber color Specs: Application: 4" wide center roller bracket Dimensions (with bells): 8" long x 5-1/4" diameter Shaft diameter: 1/2" PVC Construction Polyvinyl chloride (PVC) is a sturdy material that is great for use on marine trailers.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 13" Dimensions of bolster bracket: 12" tall x 2-1/2" wide Mounting slot dimensions: 4-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. The included 85-degree and 95-degree brackets install on an angled or V-shaped boat trailer frame with 2 U-bolts (sold separately).Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 85-Degree and 95-degree angles are designed for vertical mounting onto angled or V-shaped boat trailer frames Ensures alignment of the bunk board mounting holes Requires (2) 1/2" diameter U-bolts (sold separately) for installation 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Overall dimensions: 85-Degree bracket dimensions: 6" tall x 5" wide 95-Degree bracket dimensions: 7" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/16" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant galvanized steel.Features: Creates a fixed-position tie-down on your trailer Bolts to trailer's frame, wall or floor Mounting hardware not included 30-Degree mounting angle accommodates most tie-down applications Constructed of galvanized steel - long-lasting and corrosion resistant Made in the USA Specs: Quantity: 1 bracket Length: 4" Width: 1-15/16" Small bolt hole diameter: 1/2" Large bolt hole diameter: 7/8" The 30-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.
Replace your bow roller assembly with this complete kit. Includes a 4" roller, 2 end bells, and corrosion-resistant hardware. Blue TPR material is stronger than rubber and softer than polyurethane, and it won't leave marks on your boat.Features: Bow roller assembly replaces the bow roller, end bells, shaft, and hardware on your boat trailer Eases loading and unloading of boat Supports front of boat as it sits on trailer Helps to absorb road shock while boat is being towed End bells ensure that your boat does not scrape along bolts or roller bracket Thermal-plasticized rubber (TPR) construction Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Blue color Zinc shaft and hardware with yellow zinc finishes are corrosion-resistant Made in the USA Specs: Application: 4" wide bracket Shaft dimension: 6" long (not including bolt head) x 1/2" diameter Roller dimensions: 3-3/4" long x 3-1/4" diameter End bell diameter: At widest point: 5-1/4" At attachment point: 3-1/2" Locknut diameter: 1/2" Washer diameter: 7/16" This complete bow roller assembly includes 1 roller with 2 matching end bells, plus the hardware you need to mount them on your trailer.
... Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolster bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolster brackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 3 Bolt holes for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 16-1/4" Dimensions of bolster bracket: 15" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-3/4" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.This bracket is cut from 11-gauge steel and hot-dip galvanized, so it holds its shape and can live outside in the weather without turning rusty.
These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boat trailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
V-wing bolster bracket supports the bunks on your pontoon boat trailer. Short bracket wings and deep cradle are great for narrow pontoons. Galvanized steel material is ideal for saltwater use.Features: Heavy-duty bracket allows you to mount 2 bunk boards on your pontoon boat trailer Mounts on your boat trailer's frame or crossmember Stabilizes bunk boards when at least 2 brackets are used (other bracket sold separately) Short bracket wings surround and stabilize narrow pontoons Deep cradle keeps your boat's pontoons from jostling side-to-side Slotted mounting hole allows for easy adjustment along frame during installation 11-Gauge, galvanized steel construction is sturdy and corrosion resistant Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Application: 4" wide bunk boards Maximum length: 11-3/4" Base length: 8-1/2" Maximum height: 5-1/8" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Galvanized steel swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that your boat's hull fits snugly during transport. ... Features: Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 11-Gauge, galvanized steel construction is sturdy and resists corrosion Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-3/8" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: 2-1/2" apart on center Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Filters
