If you only have a couple steps up outside your RV door, this shorter telescoping handrail will be a better size. The 48" rail folds flat against your RV with a sleek, low-profile look that won't obstruct the door.Features: Telescoping handrail replaces the stock grab handle to give you something that's easier to reach Extends 34" out from your RV to give you 48" of total rail length Fixed angle is sturdy and designed to be nearly parallel to MORryde StepAbove RV steps Folds up flat against your trailer and stays in place with a strong magnet Does not block your door when not in use Installs easily on the exterior of your RV with included mounting bracket and screws Black powder-coated steel construction is rust resistant Specs: Overall dimensions (folded): 2" long x 5-5/8" wide x 31" tall Upper bracket dimensions: 1-1/2" long x 2-3/16" wide x 2-15/16" tall Rail length: 48" Extends 34" from your RV wall Magnet force: 120 lbs 1-Year warranty Note: Intended for 5th wheels and travel trailers with flat, fiberglass walls.
Designed for motorhomes, this telescoping rail replaces the small grab handle by your door. The 3' rail gives you extra stability on your steps. Folds flat against the wall with a sleek, low-profile look that won't obstruct the door.Features: Telescoping handrail replaces the stock grab handle to give you something that's easier to reach Extends 16" out from your RV to give you 36" of total rail length Folds up flat against your trailer and stays in place with a strong magnet Does not block your door when not in use Installs easily on the exterior of your motorhome with included hardware Black powder-coated steel construction is rust resistant Specs: Overall dimensions (folded): 2-1/2" long x 2-1/4" wide x 28" tall Rail length: 36" Extends 16" from your RV wall Magnet force: 120 lbs 1-Year warranty
Replace your RVs grab handle with a proper handrail that feels like your staircase at home. The lengthy 54" rail helps stabilize you from the first step. Folds flat against your RV with a sleek, low-profile look that won't obstruct the door.You'll also need caulk or butyl tape to seal the screw holes when mounting the Safe-T-Rail to keep moisture out. There are 2 upper mounting brackets included. The longer bracket may be needed to cover up screw holes from your old grab handle.
24" x 14" Rail offers stability and convenience as you climb into and out of your RV. Rail securely locks in place while in use and locks in stowed position alongside RV when not in use. ... Features: Foldout rail makes entering and exiting your RV safer and easier Locking mechanisms secure the handle in the open position for use and in the stowed position for travel Aluminum construction is lightweight and rustproof White powder coat finish resists corrosion Black foam padding on handle provides comfortable grip Simple installation - mounts to RV sidewall next to the door with 4 included 2" screws Can be mounted on the left or right side of your door May require drilling through the wall of your RV Use long bolts with washers or a plate (sold separately) if a door stud cannot be found Made in the USA Specs: Rail dimensions: 24" tall x 14" wide Distance in between mounting brackets: 19-1/4" Distance between rail and RV wall (when folded out for use): 15-1/4" 1-Year limited warranty
24" x 14" Rail offers stability and convenience as you climb into and out of your RV. Rail securely locks in place while in use and locks in stowed position alongside RV when not in use. ... Features: Foldout rail makes entering and exiting your RV safer and easier Locking mechanisms secure the handle in the open position for use and in the stowed position for travel Aluminum construction is lightweight and rustproof Sparkling silver powder coat finish resists corrosion Black foam padding on handle provides comfortable grip Simple installation - mounts to RV sidewall next to the door with 4 included 2" screws Can be mounted on the left or right side of your door May require drilling through the wall of your RV Use long bolts with washers or a plate (sold separately) if a door stud cannot be found Made in the USA Specs: Rail dimensions: 24" tall x 14" wide Distance in between mounting brackets: 19-1/4" Distance between rail and RV wall (when folded out for use): 15-1/4" 1-Year limited warranty
37" x 25-1/2" Rail offers stability and convenience as you climb into and out of your RV. Rail securely locks in place while in use and locks in stowed position alongside RV when not in use. ... Features: Extra-large foldout rail makes entering and exiting your RV safer and easier Locking mechanisms secure the handle in the open position for use and in the stowed position for travel Aluminum construction is lightweight and rustproof Black powder coat finish resists corrosion Black foam padding on handle provides comfortable grip Simple installation - mounts to RV sidewall next to the door with 4 included 2" screws Can be mounted on the left or right side of your door May require drilling through the wall of your RV Use long bolts with washers or a plate (sold separately) if a door stud cannot be found Made in the USA Specs: Overall dimensions: 37" tall x 25-1/2" wide Distance in between mounting brackets: 19-1/4" 1-Year limited warranty
This is a rave-worthy upgrade for your RV. It extends out far enough for you to grab hold before taking the first step up, and it folds flat without obstructing your door or slide out. Can be set at a 45-degree angle to pair with steeper steps.Features: Telescoping handrail replaces the stock handle to give you something easier to reach 50" Rail length works best with 3- or 4-tread steps Two angle options match most RV steps Remove a factory-installed pin to give it a steeper angle Folds up flat against your trailer and stays in place with a pin Does not block your door when not in use Pin attached by wire to the base, so you won't lose it easily Installs on the exterior of your RV with included mounting brackets and screws Separate upper and lower brackets help avoid obstructions next to your door Upper bracket has a subtle curve - works on flat or rounded RV walls Black powder-coated steel construction is rust resistant Single piece of metal used for rail, so it's nice and smooth Specs: Application: some triple and all quad steps Rail length: 50" Extension length: 38 Degrees: 40-3/4" from your RV wall 45 Degrees: 36-3/4" from your RV wall Which size Lend-A-Hand Banister do I need?
24" x 14" Rail offers stability and convenience as you climb into and out of your RV. Rail securely locks in place while in use and locks in stowed position alongside RV when not in use. ... Features: Foldout rail makes entering and exiting your RV safer and easier Locking mechanisms secure the handle in the open position for use and in the stowed position for travel Aluminum construction is lightweight and rustproof Black powder coat finish resists corrosion Black foam padding on handle provides comfortable grip Simple installation - mounts to RV sidewall next to the door with 4 included 2" screws Can be mounted on the left or right side of your door May require drilling through the wall of your RV Use long bolts with washers or a plate (sold separately) if a door stud cannot be found Made in the USA Specs: Rail dimensions: 24" tall x 14" wide Distance in between mounting brackets: 19-1/4" Distance between rail and RV wall (when folded out for use): 15-1/4" 1-Year limited warranty
This is a rave-worthy upgrade for your RV. It extends far enough for you to grab hold before taking the first step up, and it folds flat without obstructing your door or slide out. Feels sturdier and looks better than what you're used to.Features: Telescoping handrail replaces the stock handle to give you something easier to reach 42" Rail length works best with 2- or 3- tread steps Folds up flat against your trailer and stays in place with a pin Does not block your door when not in use Pin attached by wire to the base, so you won't lose it easily Installs on the exterior of your RV with included mounting brackets and screws Separate upper and lower brackets help avoid obstructions next to your door Upper bracket has a subtle curve - works on flat or rounded RV walls Black powder-coated steel construction is rust resistant Single piece of metal used for rail, so it's nice and smooth Specs: Application: double and some triple steps Rail length: 42" Extends 34-1/4" from your RV wall Extended angle: 38 degrees Which size Lend-A-Hand Banister do I need?
Replaces the quick-release pin on your MORryde Safe-T-Rail telescoping RV handrail (SP56-469). Secures the handrail to the mounting bracket alongside your RV's door to provide the pivot point.Features: Replaces the quick-release pin on your MORryde Safe-T-Rail telescoping RV handrail (SP56-469) Secures the handrail to the mounting bracket alongside your RV's door to provide the pivot point Fits: MORryde Safe-T-Rail telescoping RV handrail: SP56-469
This 22" RV handrail provides sturdy support as you get into and out of your camper. The foam on the handle makes for a firm, comfy grip. Latches securely into the open position for use and folds to the side of your trailer for travel.Features: Foldout rail makes getting into and out of your RV safer and easier Latching mechanism secures handle in open position for use and folded position for travel No tools required to switch positions Black foam padding on the handle gives you a firm, comfortable grip Aluminum construction is lightweight and rustproof Black powder coat finish resists corrosion Simple installation - mounts to RV sidewall with 4 included 2" screws Line up with existing holes from original rail or drill 1/8" pilot holes Caulk (sold separately) is recommended to seal drill holes Made in the USA Specs: Rail dimensions: 22" Distance between rail and RV wall (when folded out for use): 10" Black rail with black foam grip 1-Year limited warranty Note: Rail is designed to mount to the left of your RV's door.
This 22" RV handrail provides sturdy support as you get into and out of your camper. The foam on the handle makes for a firm, comfy grip. Latches securely into the open position for use and folds to the side of your trailer for travel.Features: Foldout rail makes getting into and out of your RV safer and easier Latching mechanism secures handle in open position for use and folded position for travel No tools required to switch positions Black foam padding on the handle gives you a firm, comfortable grip Aluminum construction is lightweight and rustproof White powder coat finish resists corrosion Simple installation - mounts to RV sidewall with 4 included 2" screws Line up with existing holes from original rail or drill 1/8" pilot holes Caulk (sold separately) is recommended to seal drill holes before driving screws Made in the USA Specs: Rail dimensions: 22" Distance between rail and RV wall (when folded out for use): 10" 1-Year limited warranty Note: Rail is designed to mount to the left of your RV's door.
Install this handrail on your trailer's 4-step scissor steps for extra stability when entering and exiting your camper. Clamps to your steps and includes the bracket for mounting to your RV. Constructed of aluminum for superior rust resistance.Features: Attaches to your camper's scissor steps so you can safely climb in and out of your trailer Works with Brophy and most other 4-step scissor steps Installs easily on your RV with included bracket Clamps to either side of your stairs Folds flat for convenient storage Constructed of lightweight aluminum for superior rust resistance Made in the USA Specs: Handrail length: 49" Handrail post length: 43"
A folding, collapsible handrail designed for your trailer's scissor steps. Perfect length for the 5 step variety.Features: Add extra support when using stairs Easy to remove Clamps to existing stair and includes RV mounting bracket Folds flat for convenient storage Specs: Fits Brophy and most other 5-step scissor steps Handrail length: 57" Handrail post length: 43"
Replaces the hardware and mounting bracket for your aluminum handrail (AHR3, AHR4, or AHR5).Features: Replaces the hardware and mounting bracket for your aluminum handrail (AHR3, AHR4, or AHR5) Includes mounting bracket, 1 safety pin, and 4 screws Made in the USA
Get some balance in your life with this commercial folding rail for RVs, portable restrooms or support vehicles. Use this stainless steel grab handle to help pull yourself up the stairs or for stability while you are stepping down them.Anodized aluminum screws are provided, but rails should be bolted to the RV's wall studs for a snug fit.
Get some balance in your life with this commercial folding rail for your fleet RV, portable restroom, or support vehicle. Use this stainless steel grab handle to help pull yourself up the stairs or for stability while you are stepping down them.Anodized aluminum screws are provided, but rails should be bolted to the RV's wall studs for a snug fit.
Replaces the backer plates, cover, and hardware for your Stromberg Carlson RV Lend-a-Hand or Mini Lend-a-Hand folding grab handle. Includes backer plates, cover, and hardware.Features: Replaces the backer plates, cover, and hardware for your Stromberg Carlson RV Lend-a-Hand folding grab handle Fits all 3-hole Lend-a-Hand (AM-200, AM-300, AM-533, and AM-800) and Mini Lend-a-Hand (AM-250 and AM-255) models Fits: All Stromberg Carlson 3-hole Lend-a-Hand RV rails: AM-200, AM-300, AM-533, and AM-800 All Stromberg Carlson 3-hole Mini Lend-a-Hand RV rails: AM-250 and AM-255
Experience stability while entering and exiting your RV with this folding handrail. The lightweight rail installs easily, and its drop-down leg accommodates your RV's height. Folds against the side of your RV and quickly removes for travel.Features: Lightweight handrail helps you to safely enter and exit your RV Adjustable drop-down leg adds up to 24" to the rail's height to accommodate taller RVs Secures with included pin at appropriate height Foldable rail rests against the side of your RV when not in use and easily removes for travel Remove bolt to fold or remove the rail Black powder coated steel is rust resistant Easy installation on your triple or quad manual steps Includes adjustable mounting bracket Made in the USA Specs: Rail dimensions: 38" tall (not including drop-down leg) x 25" wide Weight capacity: 250 lbs Length of drop-down leg: 24" Handrail length: 38" Rail diameter: 1-1/4" Weight: 16 lbs 1-Year warranty Note: This handrail cannot remain mounted on your RV during travel.
Your high-pressure propane regulator has a 1/4" female NPT outlet, but your torch or burner hose uses a 9/16"-18 left-hand fitting. This bushing adapts the regulator outlet so you can connect the hose and supply propane to your equipment.Specs Connections: Pipe connection: 1/4" male NPT Outlet connection: 9/16"-18 male left-hand
A short propane hose can leave your grill, cooker, or other appliance closer to the propane supply than you want it. This 12' extension connects to compatible 9/16" left-hand fittings so you can position your equipment farther away.If that limits where you can position your equipment, this 12' pigtail extension gives you more flexibility between compatible connections. The 9/16" female left-hand swivels connect to compatible fittings at both ends, so you can add length without replacing your existing hose. Specs Connections: Connection: 9/16" female left-hand swivel at both ends Hose: Length: 144" (12') Working pressure: up to 350 psig Pull test rating: 400 lbs Construction: Material: thermoplastic Ferrules: fully crimped brass
... This fitting connects a POL cylinder valve to a 9/16"-18 female left-hand fitting and restricts flow during a major line break.Specs Connections: Cylinder connection: male hard nose POL Outlet: 9/16"-18 male left-hand Hex nut: 7/8" Flow: Excess-flow rating: 0.9 GPM Construction: Material: brass
This portable hand grip gives you an extra handle for leverage where you need it. It attaches to glass, fiberglass, metal, and most plastics with a 6" vacuum cup and it only takes seconds to install and remove. ... Features: Portable hand grip gives you leverage where you need it Great for steadying yourself when getting on or off your boat 6" Pump-action vacuum cup mounts to most non-porous horizontal or vertical surfaces Attach or remove in seconds Rigid plastic material is lightweight and durable Vacuum cup mounts to metal, glass, or fiberglass in seconds - simply pump plunger Orange indicator on plunger lets you know when the vacuum cup is secure Waterproof lubricant (sold separately) helps prevent plunger from sticking Black color Made in the USA Specs: Pull rating: 210 lbs Dimensions: 6-1/2" wide x 5" tall Handle diameter: 3/4" Distance from surface: 2-1/2" Weight: 1.5 lbs Limited lifetime warranty
Filters
