Low-pressure 2-stage LP gas regulator ensures a continuous flow of gas to all appliances by combining a high-pressure first-stage and low-pressure second-stage regulator into one unit. Designed for RV applications.Features Low-pressure 2-stage LP gas regulator ensures a continuous flow of gas to all appliances by combining a high-pressure first-stage and low-pressure second-stage regulator into one unit 1/4" FIF inlet x 3/8" FPT outlet Brass inlet adapters can be removed to use hoses with MPT fittings 262,500 Btu rating Zinc die cast Molded rubber diaphragms UL Approved 2nd Stage relief mechanism per UL 144 Adjustable screw and dust cap Optional mounting bracket is sold separately Powder coated
T-fitting lets you use an auxiliary propane cylinder to power appliances so you won't deplete your camper's tank. Quick-disconnect port allows for easy hook up of the supply hose. ... Simply attach an adapter hose (sold separately) to your appliance and then to the disposable cylinder port on the T-fitting. Quick Disconnect Port The Sturgi-Stay features a quick-disconnect port. This port connects to the included fill hose from the auxiliary cylinder.
Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator. Check valve prevents hazardous backflow leakage.Bypass Mode for Safety This Type 1 connector will go into bypass mode if the flow rate surpasses the maximum flow capacity for this connector, which is 450,000 Btu per hour. A ball inside of the fitting will push an internal spring down, pressing firmly against the bottom of the fitting to shut off the flow of gas. When choosing a Type 1 connector, consider your overall propane demands and choose a connector with a flow rate that just exceeds it.
Fitting lets you adapt an old propane cylinder with left-hand POL threads for use with a Type 1 cylinder connector. Can also be used to adapt a newer version 50-lb or 100-lb propane cylinder fitting to a male Type 1 thread.Features: Fitting lets you adapt your old-style POL propane cylinder for use with a Type 1 ACME connector Can also be used to adapt a 50-lb or 100-lb cylinder Threads on exterior allow Type 1 connection with MB Sturgis Sturgi-Stay line of products O-ring ensures a tight seal with the tank Made in the USA 1-Year limited warranty
Automatic changeover regulator eliminates interruptions by automatically redirecting LP gas vapor flow from an empty cylinder to a full cylinder. Regulator features an indicator that changes from green to red when cylinder needs to be filled.Features: Automatic changeover regulator eliminates interruptions by automatically redirecting LP gas vapor flow from an empty cylinder to a full cylinder Indicator changes from green to red when cylinder needs to be filled 1/4" Inverted flare inlet x 3/8" FPT outlet connection Brass inlet adapters can be removed to use hoses with MPT fittings 345,000 BTU Zinc die cast Molded rubber diaphragms UL approved and 2nd stage relief mechanism per UL 144 Powder coated
This sewer termination adapter connects your spigot to your sewer hose. 3" Hub slides onto your spigot, and secures with ABS solvent cement (sold separately). 3" Lug fitting allows you to connect to bayonet fitting on sewer hose.Sewer termination adapter connects your spigot to your sewer hose 3" Hub slides onto your spigot ABS solvent cement (sold separately) required for installation 3" Lug fitting allows you to connect to bayonet fitting on sewer hose Bayonet-style cap (sold separately) covers lug fitting when not in use Sturdy plastic construction Length: 2-1/2"
Connect up to 3 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.Features: LP gas manifold block distributes propane to 3 separate appliances from one central point Plug-and-go installation is breeze Simply insert the adapter end of your gas line into the manifold No teflon tape required Tamper-proof design prevents dangerous gas leaks Manifold disassembly tool (JR92CR - sold separately) required for removal Male flare or NPT manifold adapters (JR52CR or JR32CR - sold separately) required to fit your existing hoses UL 407 certified Specs: Gas temperature range: -40 F - 140 F Maximum pressure rating: 350 PSI
T-fitting makes camping easier by letting you use an auxiliary propane cylinder to power appliances so that you won't deplete your camper's tank. ... Simply attach an adapter hose (sold separately) to your appliance and then to the disposable cylinder port on the T-fitting.
Bayonet fitting securely connects by twisting and locking into place on your RV's sewer connection. Fitting rotates to ensure hose lays flat after twisting into place. ... Features: Bayonet fitting ensures a secure connection by twisting and locking into place on your RV's sewer connection Fitting rotates to ensure hose lays flat after twisting fitting into place Hose slides over fitting and secures with hose clamp (sold separately) Specs: Diameter: 3" Diameter of bayonet fitting: 3-1/2" 1-Year warranty
Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator. Check valve prevents hazardous backflow leakage.Bypass Mode for Safety This Type 1 connector will go into bypass mode if the flow rate surpasses the maximum flow capacity for this connector, which is 450,000 Btu per hour. A ball inside of the fitting will push an internal spring down, pressing firmly against the bottom of the fitting to shut off the flow of gas. When choosing a Type 1 connector, consider your overall propane demands and choose a connector with a flow rate that just exceeds it.
Step up your campout cooking game and ditch those little green cylinders that run out of gas far too soon. This hose snaps into the quick-disconnect outlet on your RV to give you a steady supply of gas for your cooktop, heater, or other appliance.Both hook up without the need for any tools. Simply snap the quick-disconnect fitting into the port and it will stay locked in until you release it. To remove the fitting, just pull back on the collar of the port to disengage the connection.
Hook up an auxiliary tank to your RV to provide propane in case your primary runs dry during long campouts and get extra versatility in your propane system. Provides you with a quick-disconnect propane outlet for cooking without disposable cylinders.No one wants to have to pack up, unplug, and go refill the propane tank, just to come back to the site and set everything up all over again. This Sturgi-Stay T-fitting lets you connect an auxiliary cylinder to your setup using a quick-disconnect fill hose (sold separately). As a result, you can run your appliances from the propane in your cylinder rather than using up the LP gas from your RV's tank.
Hose lets you connect a small, portable appliance with a quick-disconnect fitting to the female quick-disconnect port on your propane piping system. Model 250 quick-disconnect connection points let you easily hook up without hand tightening.Both hook up without the need for any tools. Simply snap the quick-disconnect fitting into the port and it will stay locked in until you release it. To remove the fitting, just pull back on the collar of the port to disengage the connection.
Get a convenient quick-disconnect propane port on your RV or hose with this connector. Mounts outside of your RV for a new outlet, attaches to an auxiliary tank for quick cooking, or upgrades your current propane hose.Adapters and regulators can be used to create a new quick-disconnect outlet on your propane tank, supply hose or T-fitting.
Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator. Check valve prevents hazardous backflow leakage.Bypass Mode for Safety This Type 1 connector will go into bypass mode if the flow rate surpasses the maximum flow capacity for this connector, which is 450,000 Btu per hour. A ball inside of the fitting will push an internal spring down, pressing firmly against the bottom of the fitting to shut off the flow of gas. When choosing a Type 1 connector, consider your overall propane demands and choose a connector with a flow rate that just exceeds it.
Pigtail makes the connection from the propane tanks on your trailer to the propane regulator on your trailer. Check valve prevents hazardous backflow leakage and is suitable for dual-tank setups.A ball inside of the fitting will push an internal spring down, pressing firmly against the bottom of the fitting to shut off the flow of gas. When choosing a Type 1 connector, consider your overall propane demands and choose a connector with a flow rate that just exceeds it.
This P-trap installs under your sink, shower, or tub to prevent sewer gases from entering your RV or motorhome. The hubs slide onto sewer system pipes, and the union joint screws together to connect the 2 pieces of the P-trap.Features: P-trap fitting is part of your RV's sewer system Slip joint nuts creates watertight seal on 1-1/4" diameter pipes 1-1/2" Hub slides onto sewer system pipe and adheres with ABS solvent cement Installs under your sink, shower, or bathtub Prevents sewer gases from entering your RV or motorhome Union joint screws together to connect the 2 pieces of the P-trap Simple installation - slide hubs onto sewer system pipes Sturdy ABS plastic construction
Get some added reach to connect appliances to your propane tank with this Type 1 extension hose. Great for when you want to leave your tank on your trailer while you fire up the grill.Features: Extension hose gives you added hose length to connect to a propane cylinder Perfect for hooking up a grill or other appliance to the tank mounted on your RV Female Type 1 fitting screws onto the propane cylinder Male Type 1 fitting hooks up to outdoor appliances or other fittings or adapters Durable thermoplastic hose and brass fittings approved for LP gas only Rated for high pressure and high flow rate to handle unregulated propane UL 529, CGA 8.3 and ANSI Z21-81 certified Made in the USA Specs: Temperature range: -40 F to 140 F Hose dimensions: 180" long x 1/4" inner diameter Hose fittings: Male Type 1 Female Type 1 Maximum pressure rating: 350 psi Maximum flow capacity: 400,000 Btu per hour 1-Year limited warranty
Connect up to 4 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.Features: LP gas manifold block distributes propane to 4 separate appliances from one central point Plug-and-go installation is breeze Simply insert the adapter end of your gas line into the manifold No teflon tape required Tamper-proof design prevents dangerous gas leaks Manifold disassembly tool (JR92CR - sold separately) required for removal Male flare or NPT manifold adapters (JR52CR or JR32CR - sold separately) required to fit your existing hoses UL 407 certified Specs: Gas temperature range: -40 F - 140 F Maximum pressure rating: 350 PSI
This street elbow connects (2) 3" diameter sewer pipes in your RV or motorhome. Elbow changes the direction of waste flow. Simply slide the pipes into either side of the elbow and secure with solvent bond.
8" Long sewer line nipple connects 2 sewer pipes that move waste outside of your RV or motorhome. Each 3" MPT end threads onto your sewer system pipes. Sturdy ABS plastic construction.
... It gives you extra control when attaching to your dump site, and it's also nice to have a more sanitary place to hold it. Its 5-in-1 connection fits any port you're likely to find.Features: 5-in-1 Elbow adapter with handle makes it easy to connect to a dump station Revolving outlet with easy grip handle makes it easy to secure to sewer inlet Connector fits 3" and 4" slip, and 3", 3-1/2", and 4" threaded inlets Bayonet fitting at one end easily twists onto a standard 3" lug fitting Internal seal helps prevent leakage Made in the USA
Cylinder connector allows gas flow to your appliance. Simple, tool-free installation.Features: Cylinder connector lets you hook up a high-pressure hose to the LP cylinder on your 5th-wheel camper or travel trailer Type 1 ACME fitting allows gas to flow to your all of your appliances at once Easy, tool-free installation UL approved Designed for LP gas only Specs: Fitting size: 1-5/16" Type 1 female QCC x 1/4" male NPT Maximum flow capacity: 400,000 Btu per hour
Filters
