Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to…
view full answer...Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
view full answer...Good question, and what happens is that leaf springs elongate over time, and since you mentioned you got measurements of 25-1/2 inches from center eye to center eye and 26 inches under partial load, the best option for leaf springs really is the…
view full answer...I can certainly point you in the right direction. Unfortunately we do not have access to Dexter's serial number database, and I cannot recommend springs based off of axle specs. If only it were so easy right? The best way to go about replacing…
view full answer...No, the hall effect motor does not have to be greased, but per the service manual if the jacks are down for an extended period, it is recommended to spray the exposed leveling jack tubes with lubricant every 3 months for protection. If you live in a…
view full answer...You can definitely use the MORryde suspension bolts if that's what you're wanting to use. The correct kit depends on what your trailer is currently equipped with and how long your shackle straps are (see attached photo of where to measure).…
view full answer...Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer which…
view full answer...On your trailer you originally had what is called a wishbone harness. This type of harness has the running light circuit split at the connector so one wire will run to the left side, the other to the right side. This is so you do not have to have a…
view full answer...You just need to pack the bearings on hub and drum assembly #8-276-5. There's no such thing as too much grease for bearings! If it is an EZ lube hub with a grease zerk fitting at the end of the spindle you will know there is enough grease once it…
view full answer...We have a great option in a replacement 45 amp power converter for your ELX-45. I suggest the Progressive Dynamics, #PD4045KA. This is a 2-in-1 AC/DC distribution panel and smart charger that works with lithium-ion, flooded lead acid, AGM, and gel…
view full answer...The height or width of the Solera Awning Rail Extrusion #LC715217 that you referenced is 1-1/8 inch.
view full answer...The RhinoEXTREME RV Sewer Hose w/ Swivel Fittings #CAM39861 referenced in your question is essentially an upgraded version of the RhinoFLEX hoses, such as #CAM39761. The primary difference is that the RhinoEXTREME features a thicker sidewall that…
view full answer...Related Searches
Filter Your Search
Contact and Help