Alert other boats of your position and direction of travel with these waterproof LED dockinglights. Provides 2,000 lumens each for safe docking in reduced visibility. Stainless steel covers and aluminum heat sinks. 12" Long, 3-wire pigtail.Features: Pair of LED dockinglights lets you dock and launch safely Helps you avoid collisions with debris and other vessels at night or in reduced visibility Low-intensity and high-intensity functions provide low-beam and high-beam light output Sealed, waterproof units include durable polycarbonate housings and UV-resistant lenses Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Aluminum heat sinks help dissipate heat Rustproof stainless steel covers create a finished look Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 50,000 hours of operation Clear lens over white LEDs 12V and 24V DC compatible Recessed-mount installation in boat's hull - requires cutouts Included gaskets create weathertight seals and protect boat's finish 3-Wire pigtail hardwires to your application White wire - high intensity beam Yellow wire - low intensity beam Black wire - ground Assembled in the USA Specs: Quantity: 2 dockinglightsLight dimensions: 6-5/8" long x 3-1/8" wide x 2-3/4" thick Distance between mounting holes: 5-1/2" Light output (per light): 2,000 lumens at high intensity 600 Lumens at low intensity Diodes: 1 per light Input voltage: 9V - 30V Power draw: 1.25 - 1.75 amps per light Wire length: 12" Limited lifetime warranty
Dockinglights are essential if you're going to be docking after dark. This kit features (2) 35-watt halogen lights, stainless steel mounting brackets, rubber bracket boots, and a safety-fused wiring harness with lighted switch.Features: (2) 35-Watt halogen lights Mounting brackets: Constructed of corrosion-resistant stainless steel Include rubber bracket boots Hardwire, safety-fused wiring harness Lighted switch Black ABS plastic housing Specs: Light dimensions: 6" long x 3" tall, 4" tall with post x 2-3/4" wide 3-Year warranty
Waterproof, 5-3/4" x 3-1/4" LED dockinglights produce bright white light for safe docking and launching. Alerts other boats of your position. Stainless steel covers. Hardwires with 12" long pigtail.Features: Pair of LED dockinglights provides bright white light for improved safety and visbility when docking and launching your boat at night Sealed, waterproof units include durable, die-cast aluminum housings and UV-resistant lenses Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Stainless steel covers offer finished look Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lenses over white LEDs 12V and 24V DC compatible Surface-mount installation - hardware not included Included gaskets create weathertight seals and protect boat's finish Great for aluminum and fiberglass hulls Hardwires to your application Specs: Quantity: 2 dockinglightsLight dimensions: 5-3/4" long x x 3-1/4" wide x 1" thick Distance between mounting holes: 4-1/4" Light output: 1,400 lumens per light Diodes: 3 per light Input voltage: 9V - 30V Power draw: 0.85 - 1.15 amps per light Wire length: 12" 18 Gauge Limited lifetime warranty
Ease into tight slips with one light that handles it all - a bright docking beam for approaches, a soft courtesy glow at anchor, and a nav light that keeps you visible - sealed and corrosion resistant for long, worry free nights on the water.Features: C5 certified - highly resistant to corrosion from salt and other elements Stainless steel body for protection in salt and fresh water Thermal overheat protection for longer service life Surface-mount design - easy install with (2) #8 screws; no large holes to seal TecSeal potting for guaranteed circuit board protection Dual output: (12) LED waveguide courtesy light + (3) LED high-powered dockinglight (15 LEDs total) White LED with white lenses; port-side stainless cover option available Specs: Dockinglight outputs up to 1,750 lumens Operates on 9-14V DC; draws 1.0A per light Dimensions: 3-15/16" x 2-7/16" x 1-1/4" Sheathed pigtail connector: 30" long Lifetime warranty TecNiq has delivered a light designed to give boaters a sleek design and effective lighting.
Guiding you safely back to shore, this all-in-one light brightens your dock with powerful LEDs while adding a soft courtesy glow for your crew. Built tough for salt or fresh water, it keeps every night return smooth and stress-free.Features: Powered by 15 LEDs 12 Dedicated waveguide courtesy LEDs 3 Dedicated docking LEDs Stainless steel body protects against salt and fresh water conditions Sealed design keeps circuit boards safe Overheat protection to extend the lifespan of the light Surface mount design requires no large holes Specs: Measurements: 2-7/16" wide, 1-1/4" tall, 4" long Position: Starboard side LEDs: 15 LEDs Brightness: 1750 lumens Color: White Voltage: 9 to 14 volts DC; Current: 1 amp per light Mounting: Surface mounts with (2) #8 screws Wiring: 30" sheathed pigtail Lifetime warranty TecNiq has delivered a light is designed to give boaters a sleek design and effective lighting.
Improve vision when docking and undocking your boat at night with this 3-5/8" x 1-1/4" waterproof LED dockinglight. 3 diodes produce 450 lumens of white light. ... Features: Low-profile LED dockinglight produces a bright white light for increased visiblity and safety when docking and undocking your boat Helps prevent collisions by alerting other vessels of your position and direction of travel Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Constructed with durable plastic Military-grade construction circuit board to ensures years of trouble-free service Sealed with urethane potting, which offers better protection from water and dust than common epoxy potting Transparent lens helps produce a clear colored light Lens is impact and UV-resistant Surface-mount installation Mounts to side of the deck floor Compatible with 12V DC systems Hardwires to your application Specs: Dimensions: 3-5/8" long x 1-1/4" wide x 7/16" thick LED color: white Distance between mounting holes: 3-1/8" Light output: 450 lumens Diodes: 3 Input voltage: 9V - 14V Power draw: 0.225 - 0.275 amps Wire length: 12" IP rating: 68 Limited lifetime warranty
Improve vision when docking and undocking your boat at night with this 5-11/16" x 1-1/4" waterproof LED dockinglight. 6 diodes produce 900 lumens of white light. ... Features: Low-profile LED dockinglight produces bright white light for increased visiblity and safety when docking and undocking your boat Helps prevent collisions by alerting other vessels of your position and direction of travel Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Constructed with durable plastic Military-grade construction circuit board to ensures years of trouble-free service Sealed with urethane potting, which offers better protection from water and dust than common epoxy potting Transparent lens helps produce a clear colored light Lens is impact and UV-resistant Surface-mount installation Mounts to side of the deck floor Compatible with 12V DC systems Hardwires to your application Specs: Dimensions: 5-11/16" long x 1-1/4" wide x 7/16" thick LED color: white Distance between mounting holes: 5-1/4" Light output: 900 lumens Diodes: 6 Input voltage: 9V - 14V Power draw: 0.450 - 0.550 amps Wire length: 12" IP rating: 68 Limited lifetime warranty
All-in-one port-side light combines navigation, docking, and courtesy lighting in a compact stainless housing. IP68 sealed with a 1750-lumen docking beam and a 30" pigtail, it installs fast and meets ABYC A-16 and USCG 2 NM visibility.Features: 3-in-1 Design: navigation, docking, and courtesy lighting IP68 dust- and waterproof sealing with TecSeal potted electronics 316 Stainless steel cover; C5 corrosion-certified Thermal overheat protection for long service life Waveguide courtesy lighting: 12 LEDs; dedicated nav: 1 LED; docking: 2 LEDs Surface mount design; no large holes to seal Specs: Orientation: Port side (red navigation) Dimensions: 2-7/16" x 1-1/4" x 3-15/16" LED count: 15 total (12 courtesy, 2 docking, 1 nav) Brightness (docking): 1,750 lumens Voltage: 914 VDC; current: 1.0 A per light Mounting: Surface mounts with (2) #8 screws (not included) Wiring: 30" sheathed pigtail Wire colors: Black: ground White: docking Yellow: navigation Compliance: ABYC A-16; USCG visibility 2 NM Lifetime limited warranty The TecNiq 3 in 1 navigation, docking, and courtesy light is designed to give boaters an all in one solution for safety and coastal boating regulations.
All-in-one starboard-side light combines navigation, docking, and courtesy lighting in a compact stainless housing. IP68 sealed with a 1750-lumen dock beam and a 30" pigtail, it installs fast and meets ABYC A-16 and USCG 2 NM.Features: 3-in-1 design: navigation, docking, and courtesy lighting IP68 dust- and waterproof sealing with TecSeal potted electronics Stainless steel cover; C5 corrosion resistance Thermal overheat protection for long service life Waveguide courtesy lighting: 12 LEDs; dedicated nav: 1 LED (green); docking: 2 LEDs (white) Surface-mount design; no large holes to seal Specs: Orientation: Starboard side (green navigation) Dimensions: 2-7/16" wide x 1-1/4" tall x 3-15/16" long LED count: 15 total (12 courtesy, 2 docking, 1 nav) Brightness (docking): 1,750 lumens Electrical: 914 VDC; ~1.0 A per light Mounting: Surface mounts with (2) #8 screws (not included) Wiring: 30" sheathed pigtail Wire colors: Black: ground White: docking Yellow: navigation Compliance: ABYC A-16; USCG visibility 2 NM Lifetime warranty The TecNiq 3 in 1 navigation, docking, and courtesy light is designed to give boaters an all in one solution for safety and coastal boating regulations.
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 288 LEDs 144 Blue LEDs 144 White LEDs Frosted acrylic lens for even light distribution Black aluminum housing provides better heat dispersion Comes with 12" sheathed pigtail Parallel mounting clips sold separately Specs: Measurements: 48" long x 1-7/8"" tall x 5/16" deep LEDs: 288 LEDs Brightness: White / 4,720, Blue / 420 Color: White / Blue Voltage: 9 to 14 volts DC Mounting: surface mount Wiring: 12" sheathed pigtail Lifetime warranty TecNiq packs 288 white and blue LEDs in the Slim Line surface mount light, providing over 5,000 lumens and thousands of hours of light.
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 11 LEDs Guaranteed circuit board protection Durable impact resistant lens Exceeds FMVSS 108 standards, IP68 rated for dust and water proofing Multiple mounting positions Wire functions: Yellow: reverse Red: stop/turn Black: running lights White: ground Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 3 Color: Clear lens Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screws not included - screw caps included) Connector: 9" wire Lifetime warranty TecNiq packs wide angle and bright illumination for maximum safety while retaining a sleek design.
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 11 LEDs Hermetic seal for dust and waterproofing Durable impact resistant lens Exceeds FMVSS 108 standards Can be mounted at any angle Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 11 Color: Red Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screw caps included) Connector: 9" pigtail Lifetime warranty TecNiq's Stop Tail Turn Light is a quality waterproof lamp that can be mounted in unique locations where space is at a premium.
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Improve area and accent lighting with surface mount dome lighting.
9-3/4" x 3-1/2" Oval. LED light functions as an RV porch light or utility light producing bright light at a downward angle to illuminate an area. Surface mount - hardware included. 2-Wire pigtail. 27 LEDs.Features: LED light functions as an RV porch light or utility light producing bright light at a downward angle Weatherproof housing and lens protect against water damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable ABS lens and housing Snap-in lens allows for easy replacement Clear lens over white LEDs Mounts on surface of RV - hardware included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 9-3/4" long x 3-1/2" tall x 2-1/4" deep Distance between mounting holes (center on center): 9" Light type: daylight white Color temperature: 5,500 K Lumen output: 190 raw lumens Diodes: 27 Power draw at 12V: 0.14 amps 1-Year warranty
2 Waterproof, LED, boat spotlights emit a 30-degree cone of light for improved vision when navigating at night. Secondary floodlight function provides 120 degrees of light for safer docking. Stainless steel covers with aluminum heat sinks.Features: Pair of LED spotlights emits bright white light to increase safety when navigating your boat Spotlight produces a 30-degree cone of light to prevent collisions with debris and other vessels in reduced visibility Secondary flood beam produces 120 degrees of light for docking Sealed, waterproof unit includes durable, die-cast aluminum housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Rustproof 316 stainless steel covers create a finished look Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lenses over white LEDs Surface-mount installation - no cutouts required Included gaskets create weathertight seals and protect boat's finish Specs: Quantity: 2 spotlights Light dimensions: 8" long x 4" wide x 3/4" thick Distance between mounting holes: 7-1/4" Diodes: 6 per light Input voltage: 9V - 14V Power draw: 0.45 - 0.55 amps per light Wire length: 9" Limited lifetime warranty
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 8 LEDs Hermetic seal for dust and waterproofing Durable impact resistant lens Exceeds FMVSS 108 standards Specs: Measurements: 6-1/2" x 3-1/4" x 1-1/2" LEDs: 8 Color: Red lens Voltage: 9 to 14 volts Mounting: Grommet mounted Connector: Pigtail Lifetime warranty TecNiq has designed this high visibility stop, tail, and turn light to ensure you are seen in all conditions and at great distances.
From dockinglights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 1 LED UV resistant, dust and waterproof Low amp drawing only 0.06 amps at 12V DC TecSeal urethane potting material guarantees circuit board protection Standard non polarized connector Specs: Measurements: 2 1/2" wide, 3/4" deep LEDs: 1 Light output: P2 Rated Color: Red Voltage: 9 to 14 volts DC; Current: 0.06 amp Mounting: Grommet mount into standard hole Connector: PL2 Non polarized connector (sold separetly part number A46PB) Lifetime warranty TecNiq incorporates high end LEDs, low profile design, and reliable water protection for years of trouble free performance.
... It installs easily and covers all your essential lighting needs.Features: Trailer light kit designed to provide complete lighting for trailers under 80" wide Includes tail lights, side marker lights, wiring harness, and license bracket Provides all required lighting and reflectors for DOT compliance 20&' Trailer harness allows full trailer connection License bracket made of corrosion-free black plastic that flexes on impact Mounting hardware and installation instructions included Easy installation for complete setup Includes 1 complete trailer light kit Specs: Application: Trailers under 80" wide Tail light dimensions: 4-3/4" x 4-1/2" Harness length: 20' Light colors: Red, white, amber
Recess this dome light into the ceiling of your RV for a sleek, low-profile look and use the integrated switch to turn it on and off. Angle the light to your side of the bed when winding down with a good book. 2 Incandescent light bulbs are included.Pivoting Lights Can Be Angled Side to Side The 2 lights on this dome light can pivot side to side, so you and your partner can each angle a light onto your sides of the bed when winding down with a good book.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". ... Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
Filters
