You're wiring up the trailer and want it done right the first time. This 4-way flat connector has pre-stripped, color-coded wires and extra length to reach where you need. Splice it in, test the lights, and you're ready to tow.Features to know about 4-Way Replacement with Extra Reach This pre-wired 4-flat connector makes it easy to upgrade or replace your trailer plug. The color-coded wires match standard functions, and the 60" jacketed harness gives you the length you need to route and protect the wiring along the frame.
Your trailer needs a 4-way, but your vehicle runs separate turn and brake signals. You wire it up anyway and the lights don't work. This converter fixes it. It handles the signal translation, so your trailer lights work every time.It combines the signals internally and sends them through a single plug. The color-coded wires simplify installation, and the 12" lead gives you room to make clean connections. Great for small trailers or utility setups.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.Color-coding does not guarantee that the circuit you are connecting to is for the same function. A circuit tester is recommended. Once the Autowbrake is mounted and installed, plug your trailer into your vehicle and begin the calibration process.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plug-in, vehicle-specific brake control adapter (sold separately) available for select vehicles Units not individually boxed for retail Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
... Black plastic socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color-coded to RVI standards.Features: Standard, 7-pole, RV blade-style socket connects tow vehicle to trailer Black plastic construction Eliminates rusting Enhances appearance Prevents difficulty in plug removal Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded lid with stainless steel spring and rubber gasket Prevents leaks when closed Drain slot has angled design for drainage Secures trailer-end connector in socket Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License, and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge Distance between mounting holes center to center: 2-1/4" wide x 1-1/2" tall 1-Year limited warranty
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.Features: Activates trailer brakes in proportion to your vehicle's braking Automatically adjusts trailer's braking based on deceleration of tow vehicle Automatically increases power when going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with pinch-trigger Protects your vehicle, trailer, and controller Runs continuous diagnostic checks Minimizes drain on car battery with sleep mode Keeps trailer brakes from overheating by reducing power output during prolonged stops Defends brake controller and trailer breakaway systems against shorts Prevents positive and negative power reversal with built-in polarity protection Mounts at any angle Automatic leveling Mounting bracket and hardware included Plugs right in with custom-fit harness Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric trailer brakes Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Dimensions: 4" long x 3-1/8" wide x 1" tall Warranty: Limited lifetime on brake controller Limited 1-year on wiring harness Gain and Load Adjustment Gain is the maximum amount of power that will be applied to your trailer's brakes.
... Metal socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color coded to RVI standards.Features: Standard, 7-pole, RV-style socket connects tow vehicle to trailer Heavily plated metal construction Resistant to weather and corrosion Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded cover with stainless steel spring Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge At its widest point, the diameter of the round portion 1-7/8" Mounting holes are 1-1/2" from center to center vertically and 2-3/16" from center to center horizontally 1-Year limited warranty 12-703 Pollak Metal 7-Pole, RV-Style Trailer Socket - Vehicle End Replaces 30310
Filters
