Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, a weight distribution system like the Curt TruTrack Weight Distribution System part #C17499 will add stress to both the trailer and vehicle frame. That said, this stress is not usually enough to cause damage. The only exceptions to this would be…
view full answer...An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…
view full answer...There are 4 possible reasons why the Tekonsha Primus, #TK90160, is telling you N.C. 1. Trailer not connected to tow vehicle. 2. Trailer connected with open circuit on brake line. 3. Trailer connector disconnected or corroded. 4. Loss of trailer brake…
view full answer...What you described is perfectly normal. When not connected to a trailer the Prodigy P2 part #90885 will show two dots like you described. After a period of inactivity the controller will go into sleep mode. It doesn't turn off with the vehicle…
view full answer...On the Primus brake controller #TK90160 it would read nc if no trailer was connected. If the 2 dots are actually 2 dashes and they are at the bottom of the display then that indicates that the controller is mounted at too low of an angle. If…
view full answer...You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…
view full answer...The Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems #EQ95-01-5150 are only designed for use with the Equal-i-zer systems such as the Equal-i-zer Weight #EQ37100ET and should not be used with your Curt TruTrack Weight Distribution…
view full answer...According to my research, you are not alone in having a difficult time finding the factory trailer brake controller wiring on your 2018 Buick Enclave. I was able to find a tech bulletin on your Buick Enclave that describes exactly where the wiring…
view full answer...An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…
view full answer...The bars with your current Husky weight distribution system are going to be too heavy duty for your new trailer. Unfortunately, we no longer carry this line from Husky and we will not have the lower rated bars. With that being said, we do have the…
view full answer...I spoke with my contact at Curt who said that the ideal location for the brackets is 28" on your frame from the hitch ball for the Curt TruTrack #C17499. He did say that they designed this Weight Distribution (WD) system so that you have a…
view full answer...When the instruction manual for the Curt TruTrack Weight Distribution System part #C17499 states to set the bracket height closest to the spring bar position set with the jack earlier, they are referring to the when you raised the front of the…
view full answer...Related Searches
Filter Your Search
Contact and Help