Steel brackets permanently install into the stake pockets of your non-dually, full-size pickup for a convenient, integrated camper tie-down. Creates a dependable anchor point for mounting your lightweight camper. For campers up to 8' long.Features: Creates attachment points for securing your camper to your truck bed Turnbuckles (sold separately) required to attach camper to tie-downs Fits tightly into the stake pocket with built-in spacers Spacers can be pried off to give you more wiggle room for installation Resists corrosion and rust with black powder coated steel Mounts permanently in your truck's stake pockets - drilling required Locks tie-downs into the truck bed side rails with metal tabs Includes 4 camper tie-downs and installation hardware Made in the USA Specs: Application: most full-size, non-dually pickup trucks with straight fenders and single-wall construction (for exact fits, enter in your vehicle's year/make/model above) Model years up to and including 2010 Compatible with drop-in bed liners and side-step beds Works with truck bed campers up to 8' long Dimensions: see diagrams below 1-Year limited warranty Simple, Secure, and Convenient Installing these tie-downs is pretty darn simple.
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.No-Drill Installation These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done.
Steel brackets clamp onto the bed rails of your full-size pickup with no drilling. Gives your lightweight camper a solid, secure anchor point. Easy to install when you're ready to camp and remove when you're not.Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done.
... Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done.
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.No-Drill Installation These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done.
... Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done.
... Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and remove.Features: Creates attachment points for securing your camper to your truck bed Wide clamps provide superior holding strength Turnbuckles (sold separately) required to attach camper to tie-downs Protects your truck's paint with neoprene pads attached to the brackets Plated with zinc for superior rust and corrosion resistance Clamps securely onto your bed rails - no drilling required Includes 4 camper tie-downs with clamp plates, 4 extra-long T-bars, 12 neoprene pads, and installation hardware Made in the USA Specs: Application: for exact fits, enter in your vehicle's year/make/model above Minimum 2" needed between sidewall and lip of bed rail Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds Dimensions: see diagrams below 1-Year limited warranty Superior Rust Resistance These bed-mounted tie-downs offer a premium option while still keeping you on budget.
... Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and remove.Features: Creates attachment points for securing your camper to your truck bed Wide clamps provide superior holding strength Turnbuckles (sold separately) required to attach camper to tie-downs Protects your truck's paint with neoprene pads attached to the brackets Plated with zinc for superior rust and corrosion resistance Clamps securely onto your bed rails - no drilling required Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware Made in the USA Specs: Application: for exact fits, enter in your vehicle's year/make/model above Minimum 2" needed between sidewall and lip of bed rail Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds Dimensions: see diagrams below 1-Year limited warranty Superior Rust Resistance These bed-mounted tie-downs offer a premium option while still keeping you on budget.
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Surface mount doesn't require that you cut a hole in your trailer or truck bed. Installs easily with the included backing plate and hardware. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Surface-mount design doesn't require you to cut a hole in your trailer or truck bed Backing plate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Simple, bolt-on installation on flat surface Backing plate attaches directly under D-ring anchor and on the opposite side of the mounting surface 2 Nuts, 2 lock washers, and (2) 1/4" x 2-1/4" bolts included Specs: Maximum load (break strength): 800 lbs Safe working load limit (WLL): 265 lbs Anchor: Base diameter: 4" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
... The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance. Includes mounting bracket.Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets you rotate D-ring so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backing plate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backing plate attaches directly under D-ring anchor and on the opposite side of the mounting surface 4 Nuts, 4 lock washers, and (4) 5/16" x 2-1/4" bolts included Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Base diameter: 6-5/16" Recess: 7/8" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6-1/2" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 400 lbs.Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Hardware not included Specs: Maximum load (break strength): 1,200 lbs Safe working load limit (WLL): 400 lbs Base dimensions: 5" long x 3-9/16" wide Recess: 5/16" D-ring thickness: 1/4" Fastener hole diameter: 5/16" 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This durable steel D-ring creates an attachment point for rope, tie-down straps, or bungee cords wherever you need cargo control. The corrosion-resistant zinc-plated ring sits in a plastic bezel and bolts onto any flat surface.Features: Tie-down anchor provides a solid point to secure your cargo with rope, straps, or bungee cords Surface-mount design does not require you to cut a hole in your trailer or truck bed Anchor sits recessed in a plastic bezel, allowing cargo to slide over it D-ring rotates so you can attach rope from multiple angles Zinc-plated steel resists corrosion and retains its strength through repeated use Simple, bolt-on installation to flat surface Mounting bolts not included Specs: Maximum load: 800 lbs Working load limit: 265 lbs Ring diameter: 1/4" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
... The zinc-plated ring resists corrosion and bolts onto a flat surface. Includes mounting bracket.Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords Surface-mount design does not require you to cut a hole in your trailer or truck bed D-ring rotates 180-degrees so you can attach straps from multiple angles Zinc-plated steel construction resists corrosion and retains its strength through repeated use Simple, bolt-on installation to flat surface Mounting hardware not included Specs: Maximum load (break strength): 11,700 lbs Working load limit: 4,000 lbs Ring diameter: 1/2" Internal ring dimensions: 2-3/8" wide x 2-1/2" tall Dimensions: 3-1/2" wide x 3-3/8" tall 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
... The stainless steel ring resists corrosion and bolts onto a flat surface. Includes mounting bracket.Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords Surface-mount design does not require you to cut a hole in your trailer or truck bed D-ring rotates 180-degrees so you can attach straps from multiple angles Stainless steel construction resists corrosion and retains its strength through repeated use Constructed of Grade 304 stainless steel Simple, bolt-on installation to flat surface Mounting bolts not included Specs: Maximum load (break strength): 5,000 lbs Working load limit: 1,600 lbs Ring diameter: 3/16" Usable internal ring dimensions: 1-1/2" wide x 1-5-16" tall Mounting bracket dimensions: 1-3/16" wide x 3-1/2" long Distance between mounting holes center to center: 2-1/4" Mounting hole dimensions: 7/16" x 7/16" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. WLL is 2,000 lbs.
Sturdy D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control. Simply bolts onto any flat surface. No need to cut a mounting hole. Zinc-plated steel ring and mounting bracket resist corrosion.Features: Sturdy D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control Simple bolt-on installation Mounting bolts not included Surface-mount design No need to cut a hole in your trailer or truck bed D-ring rotates 180-degrees so you can attach straps from multiple angles Zinc-plated steel construction resists rust and corrosion Optional backing plate (BP12) provides additional strength when mounting to thin steel or wood Specs: Maximum load (break strength): 1,500 lbs Safe working load limit (WLL): 500 lbs Ring diameter: 1/4" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
These sturdy steel D-rings create stable tie-down points in your trailer or truck bed. Recessed D-rings swivel 360 degrees for versatile tie-down positioning. Installs easily with the included backing plates and hardware. ... Features: D-ring anchors provide tie-down points in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets you rotate D-rings so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-rings from interfering as you roll cargo into and out of your trailer or truck bed Backing plates reinforce the surface of your trailer where the tie-downs attach Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backing plates attach directly under D-ring anchors and on the opposite side of the mounting surface 16 Nuts, 16 lock washers, and (16) 5/16" x 2-1/4" bolts included Specs: Maximum load (break strength): 6,000 lbs per D-ring Safe working load limit (WLL): 2,000 lbs per D-ring Anchor dimensions: Base diameter: 6-5/16" Recess: 7/8" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6-1/2" wide x 1/8" thick Quantity: 4 D-rings Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Sturdy steel ball mount with a solid shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both drop and rise positions available to ensure level towing Sturdy steel construction with solid shank Corrosion-resistant black powder coat finish Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 10,000 lbs Tongue weight: 1,000 lbs Length: 13-1/4" from center of hitch pin hole to center of ball hole 7-1/2" From center of hitch pin hole to nearest edge of ball platform Rise: 3/4" from top of inside of hitch opening Drop: 2" from top of inside of hitch opening Ball hole diameter: 1-1/4" Ball platform thickness: 3/4" Pin hole diameter: 5/8"
Heavy-duty, sturdy steel ball mount with hollow shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both drop and rise positions available to ensure level towing Sturdy steel construction with hollow shank Powder coat finish resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 10,000 lbs Tongue weight: 1,000 lbs Length: 13-1/4" from center of hitch pin hole to center of ball hole 7-1/2" From center of hitch pin hole to nearest edge of ball platform Rise: 3/4" from top of inside of hitch opening Drop: 2" from top of inside of hitch opening Ball hole diameter: 1" Ball platform width: 3" Pin hole diameter: 5/8"
Aluminum reversible ball mount easily slides into your hitch and can be used in either the drop or rise position. This ball mount measures 11-1/4" from the pin hole to the ball hole and can accommodate a hitch ball with a 1" diameter shank.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Heavy-duty aluminum construction is strong and corrosion resistant Both drop and rise positions available to ensure level towing Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 8,000 lbs Tongue weight: 800 lbs Length: 15-1/4" 11-1/4" From center of hitch pin hole to center of ball hole 4-1/8" From center of hitch pin hole to beginning of bend when used in the rise position 2-5/8" From center of hitch pin hole to back end of ball mount Rise: 7" from top of inside of hitch opening Drop: 8" from top of inside of hitch opening Ball platform thickness: 1" Ball hole diameter: 1" Pin hole diameter: 5/8"
Aluminum reversible ball mount easily slides into your hitch and can be used in either the drop or rise position. This ball mount measures 12" from the pin hole to the ball hole and can accommodate a hitch ball with a 1" diameter shank.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Heavy-duty aluminum construction is strong and corrosion resistant Both drop and rise positions available to ensure level towing Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 8,000 lbs Tongue weight: 800 lbs Length: 16" 12" From center of hitch pin hole to center of ball hole 4-3/4" From end of shank to beginning of bend that leads to ball platform 2-5/8" From center of hitch pin hole to back end of ball mount Rise: 5" from top of inside of hitch opening Drop: 6" from top of inside of hitch opening Ball platform thickness: 1" Ball hole diameter: 1" Pin hole diameter: 5/8"
Aluminum reversible ball mount easily slides into your hitch and can be used in either the drop or rise position. This ball mount measures 10-1/2" from the pin hole to the ball hole and can accommodate a hitch ball with a 1" diameter shank.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Heavy-duty aluminum construction is strong and corrosion resistant Both drop and rise positions available to ensure level towing Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 8,000 lbs Tongue weight: 800 lbs Length: 14-5/8" 10-1/2" From center of hitch pin hole to center of ball hole 4-5/8" From center of hitch pin hole to beginning of bend when used in the rise position 2-5/8" From center of hitch pin hole to back end of ball mount Rise: 3" from top of inside of hitch opening Drop: 4" from top of inside of hitch opening Ball platform thickness: 1" Ball hole diameter: 1" Pin hole diameter: 5/8"
Sturdy steel ball mount with a hollow shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both drop and rise positions available to ensure level towing Sturdy steel construction with hollow shank Corrosion-resistant black powder coat finish Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: 10,000 lbs Tongue weight: 1,000 lbs Length: 13-1/4" from center of hitch pin hole to center of ball hole Rise: 3/4" from top of inside of hitch opening Drop: 2" from top of inside of hitch opening Ball hole diameter: 1-1/4" Ball platform thickness: 3/4" Pin hole diameter: 5/8"
Aluminum reversible ball mount easily slides into your hitch and can be used in either the drop or rise position. This ball mount measures 9-3/4" from the pin hole to the ball hole and can accommodate a hitch ball with a 1" diameter shank.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Heavy-duty aluminum construction is strong and corrosion resistant Both drop and rise positions available to ensure level towing Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 8,000 lbs Tongue weight: 800 lbs Length: 14" 9-3/4" From center of hitch pin hole to center of ball hole 5-1/2" From center of hitch pin hole to beginning of bend when used in the rise position 2-5/8" From center of hitch pin hole to back end of ball mount Rise: 1" from top of inside of hitch opening Drop: 2" from top of inside of hitch opening Ball platform thickness: 1" Ball hole diameter: 1" Pin hole diameter: 5/8"
Filters
