This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.Features: Incandescent trailer light kit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware Sonically sealed, waterproof tail lights and clearance lights are submersible 2 Low-profile combination tail lights (ST16RB and ST17RB) Provide stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex functions Driver's-side light includes license illuminator 2 Amber clearance lights (MC91AB) Self-grounding chrome bases Gaskets for weathertight seal 2 Amber reflectors (RE11AB) meet FMVSS "A" for reflex when properly applied Durable polycarbonate housing on all lights Compatible with 12V DC systems Simple installation with included mounting bracket (LP5SB) and stainless steel mounting hardware Tail lights stud mount to trailer Clearance lights surface mount to trailer Reflectors screw-mount to trailer or attach with adhesive backing 25' Wiring harness with 4-pole connector DOT approved PC rated Specs: Application: trailers over 80" wide Tail light dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Distance between mounting holes (center on center): 2" Clearance light dimensions: 2-7/8" long x 1-1/2" wide x 1" thick Reflector dimensions: 4-7/16" long x 1-15/16" wide Distance between mounting holes (center on center): 3-15/16" Power draw at 12V: Tail lights: Stop/turn: 2.3 amps Tail: 0.9 amps Clearance lights: 0.2 amps Limited 3-year warranty Note: Over 80" Federal Regulations require additional clearance lights (like MC94RB, sold separately) Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and stainless steel hardware. Vented plate releases heat.The actuator mounts on your trailer's frame with the included stainless steel hardware. Then it splices into the trailer's wiring and connects to your hydraulic brake lines from the 3/16" female port.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic disc brakes. Vented end plate releases heat. Hydraulic lines and breakaway sold separately.The actuator mounts on your trailer's frame with the included hardware. Then it splices into the trailer's wiring and connects to your hydraulic brake lines from the 3/16" female port.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.No Cutting or Splicing Needed: Custom-Fit T-Connector Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing.
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.No Cutting or Splicing Needed: Custom-Fit T-Connector Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.No Cutting or Splicing Needed: Custom-Fit T-Connector Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic drum brakes. Vented end plate releases heat. Includes hardware. Hydraulic lines and breakaway sold separately.The actuator mounts on your trailer's frame with the included hardware. Then it splices into the trailer's wiring and connects to your hydraulic brake lines from the 3/16" female port.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic drum brakes. Vented end plate releases heat. Includes hardware. Hydraulic lines and breakaway sold separately.The actuator mounts on your trailer's frame with the included hardware. Then it splices into the trailer's wiring and connects to your hydraulic brake lines from the 3/16" female port.
Anodized aluminum electric-hydraulic actuator with control adapter module (CAM) lets you use your Ford, Chevy, or GM factory brake controller to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and hardware.Features: Electric-over-hydraulic brake actuator activates your trailer's hydraulic brakes when you apply the brakes in your tow vehicle Factory brake controller sends signal from tow vehicle to actuator when you apply the brakes in your tow vehicle 7-Way trailer connector is needed to transmit signal from brake controller Control adapter module (CAM) included for compatibility with your Ford, Dodge, or GM factory brake controller Easy plug and play install - no hardwiring required Improved functionality when compared with surge brake couplers Faster response time - trailer brakes are triggered when you apply brakes in tow vehicle, as opposed to when trailer pushes against hitch ball No need to manually lock out brakes when you back up Trailer brakes can be intentionally activated when you reverse Manual override on brake controller can be activated so you can engage the trailer brakes without having to apply your vehicle brakes Vented end plate releases pressure, moisture, and heat in order to protect the internal components Allows actuator to be mounted in places where most actuators would overheat Electronic, proportional pressure valve ensures that braking is smooth and effective Built-in bleeder screw lets you easily flush air out of the brake lines Durable extruded aluminum provides superior corrosion resistance Marine-grade gasket and stainless steel hardware make this ideal for marine use Compatible with any standard, 5-amp-hour-battery breakaway kit DOT compliant Unit installs on trailer frame and connects to trailer's wiring and hydraulic brake lines (sold separately) Made in the USA Specs: Application: single-, tandem-, or triple-axle trailers with disc brakes Maximum output pressure: 1,600 psi Power: 12V DC Hydraulic port size: 3/16" Dimensions: 11-3/4" long x 3" wide x 7-3/8" tall Wire configuration: Black: 12-volt power Blue: brake controller Yellow: breakaway White: ground Warranty: Actuator: 2 years Brakes and components: 1 year Note: Do not power wash the Hydrastar actuator or take it through a commercial car wash.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and stainless steel hardware. Vented plate releases heat.The actuator mounts on your trailer's frame with the included stainless steel hardware. Then it splices into the trailer's wiring and connects to your hydraulic brake lines from the 3/16" female port.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.No Cutting or Splicing Needed: Custom-Fit T-Connector Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing.
This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.If no custom harness is available for your vehicle, use the included wiring harness to hardwire directly into your vehicle's wiring, and then plug into the controller. The other harness on the DirecLink plugs right into the OBD-II connection port on your vehicle.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and stainless steel hardware. Vented plate releases heat.The actuator mounts on your trailer's frame with the included stainless steel hardware. Then it splices into the trailer's wiring and connects to your hydraulic brake lines from the 3/16" female port.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.No Cutting or Splicing Needed: Custom-Fit T-Connector Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing.
Lightweight aluminum trailer has 2 levels of storage so you can haul all your gear, including fishing kayaks, cargo boxes, bikes, and even a rooftop tent. Crossbars have top channels for mounting accessories. Tongue folds for storage.Features: Lightweight trailer has 2 levels of storage so you can easily haul all your gear Heavy-duty crossbars on the top level let you attach mounts for bikes, skis, kayaks, cargo carriers, or even a rooftop tent Built-in tie-down points on endcaps make it easy to secure equipment and gear Bottom level accepts clamp-on accessories - perfect for longer kayaks, cargo carriers, fishing poles, and coolers Shock absorbers cushion your equipment against vibrations caused by rough roads Trailer easily converts for use as a handcart Built-in handle lets you maneuver the trailer closer to the water's edge and helps when hitching up to your vehicle Submersible tail lights and side markers increase safety and visibility while towing Foldable tongue and kickstand makes storing the trailer simple Durable aluminum construction with powder coat resists rust and corrosion Powder coated aluminum wheels have DOT compliant tires Assembly required - includes hardware, brackets, wiring, and safety chains 4-Way flat trailer plug connects to vehicle Available accessories expand trailer capabilities SpareTire kit (Y08125 - sold separately) makes sure you always have a spare on hand TentKit (Y08127 - sold separately) converts your trailer into a stand-alone platform for a rooftop tent Specs: Weight capacity: 500 lbs Upper bars: 350 lbs Maximum boat size: 19' Maximum crossbar spread: 60" Crossbar diameter: 2" Dimensions: 14-1/2' long x 79-3/4" wide x 41-1/4" tall Coupler height: 16" Coupler ball size: 2" Trailer tongue dimensions: 2" x 3" Wheel dimensions: 12" diameter x 5-5/16" wide Wheel bolt pattern: 4 on 4" Tire size: 5.30-12 (135/90-12) Tire capacity Load range: C Maximum load: 1,050 lbs at 80 PSi Tire brand: Ultra-Runner by Apexway Speed rating: 75 mph Trailer weight: 175 lbs Limited 1-year warranty Maximum Length for Kayaks on Bottom Deck Note: Your local municipality requires you to register your trailer with the DMV.
4-Way trailer harness connects to your tow vehicle to control trailer light functions. Wishbone-style harness comes with 2 tail light wires split for simple wiring.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.No Cutting or Splicing Needed: Custom-Fit T-Connector Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.No Cutting or Splicing Needed: Custom-Fit T-Connector Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing.
Upgrade to disc brakes with 6 super rust-resistant slip-on rotors and an electric-over-hydraulic actuator that works with your existing brake controller, and get outstanding braking performance. Includes hydraulic lines and fittings.But if you tow your camper or trailer in the Midwest during the winter, or if you ever launch your boat in brackish water, you'll need even more protection because of the salt you'll likely encounter.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.No Cutting or Splicing Needed: Custom-Fit T-Connector Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing.
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.No Cutting or Splicing Needed: Custom-Fit T-Connector Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing.
Filters
