Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. ... Features: Trailerhub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Large hub flange allows for use with larger wheels Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 2,000-lb trailer axles with BTR spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Hub diameter: 6.25" Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailerhub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 2,000-lb trailer axles with BTR spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 10" to 12" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Hub length: 4" Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is made for use on trailer idler axles. Fits 2K E-Z Lube and Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. ... Features: Trailerhub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Large hub flange allows for use with larger wheels Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BTR spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Hub diameter: 6.25" Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.Features: Trailerhub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 2,000-lb trailer axles with BT8 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 10" to 12" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included. ... Features: Trailerhub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Large hub flange allows for use with larger wheels Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 2,000-lb trailer axles with BT8 spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Hub diameter: 6.25" Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Galvanized finish is great for marine use. E-Z Lube design simplifies lubrication. Trailerhub fits 2,200-lb idler axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and galvanized lug nuts included.Features: Marine-grade trailerhub assembly fits idler axles Includes bearings, races, grease seal, grease cap, and zinc-coated lug nuts Zinc plating has a 500-hour salt spray rating Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications E-Z Lube design makes lubricating bearings simple Just remove plug on grease cap to access zerk fitting on spindle - no disassembly required Hub is made in the USA Specs: Application: 2,200-lb axles with E-Z Lube spindles that require a 1-1/2" inner diameter grease seal Hub flange diameter: 6-1/2" Works with 13" - 15" wheels Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 2" long Weight capacity: 1,100 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-60 Inner diameter: 1.5" Outer diameter: 1.987" Corrosion Resistance for Marine Use This trailerhub assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer.
Hub is designed for use on agricultural trailers without brakes. Fits 7,000-lb axles. Inner bearing (JL69349) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailerhub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (6) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 7,000-lb trailer axles with agricultural spindles Use with TRP spindle SP-888175-105, SP-888200-125, or SP-888200-140 Weight capacity (at max 20 mph): 3,560 lbs Bolt pattern: 6 on 6" Pilot hole diameter: 4.62" Grease cap flange diameter: 2.446" Wheel offset: 1.12" Bearing, Race, and Seal Information Bearings (included) Inner bearing: JL69349 (1.4961" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: JL69310 Outer race: LM67010 Grease seal (included): AG-GS-25661625SL Inner diameter: 1.625" Outer diameter: 2.566" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is designed for use on agricultural trailers without brakes. Fits 7,000-lb axles. Inner bearing (LM501349) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailerhub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (6) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 7,000-lb trailer axles with agricultural spindles Use with TRP spindle # SP-356200-130 Weight capacity (at max 20 mph): 3,500 lbs Bolt pattern: 6 on 6" Pilot hole diameter: 4.62" Grease cap flange diameter: 2.44" Wheel offset: 1.12" Bearing, Race, and Seal Information Bearings (included) Inner bearing: LM501349 (1.625" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: LM501310 Outer race: LM67010 Grease seal (included): AG-GS-30662000SL Inner diameter: 2.000" Outer diameter: 3.066" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is designed for use on agricultural trailers without brakes. Fits 15,000-lb axles. Inner bearing (387AS) and race, outer bearing (LM501349) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailerhub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (8) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 15,000-lb trailer axles with agricultural spindles Use with TRP spindle # SP-758300-160 Weight capacity (at max 20 mph): 7,500 lbs Bolt pattern: 8 on 8" Pilot hole diameter: 6" Grease cap flange diameter: 3.13" Wheel offset: -.38" Bearing, Race, and Seal Information Bearings (included) Inner bearing: 387AS (2.250" inner diameter) Outer bearing: LM501349 (1.625" inner diameter) Races (included) Inner race: 382A Outer race: LM-501310 Grease seal (included): AG-GS-40083000SL Inner diameter: 3.000" Outer diameter: 4.008" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is designed for use on agricultural trailers without brakes. Fits 11,500-lb axles. Inner bearing (3780) and race, outer bearing (2790) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailerhub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (8) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 11,500-lb trailer axles with agricultural spindles Use with TRP spindle # SP-819275-145 Weight capacity (at max 20 mph): 5,790 lbs Bolt pattern: 8 on 8" Pilot hole diameter: 6" Grease cap flange diameter: 3.16" Wheel offset: -1.50" Bearing, Race, and Seal Information Bearings (included) Inner bearing: 3780 (2.000" inner diameter) Outer bearing: 2790 (1.3125" inner diameter) Races (included) Inner race: 3720 Outer race: 2720 Grease seal (included): AG-GS-37562500SL Inner diameter: 2.500" Outer diameter: 3.756" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Specs Application: Application: 2,000-lb trailer axles with BTR spindles Compatible with: Standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel Compatibility: Wheel size: 10" to 12" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.988" Weight and Capacity: Weight capacity: 1,000 lbs Warranty: Limited warranty: 1-year Bearing, Race, and Seal Information: Bearings (included): Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included): Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Determining Bolt Pattern Count the lug holes Look at the wheelhub or the back of the wheel and count how many lug holes there are (also called bolt holes) Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug 2a.
Hub is designed for use on agricultural trailers without brakes. Fits 9,500-lb axles. Inner bearing (25590) and race, outer bearing (25877) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailerhub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (8) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 9,500-lb trailer axles with agricultural applications Use with TRP spindle # SP-778213-155 Weight capacity (at max 20 mph): 4,910 lbs Bolt pattern: 8 on 8" Pilot hole diameter: 6" Grease cap flange diameter: 3.16" Wheel offset: -1.50" Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25590 (1.796" inner diameter) Outer bearing: 25877 (1.375" inner diameter) Races (included) Inner race: 25520 Outer race: 25821 Grease seal (included): AG-GS-36282000SL Inner diameter: 2.000" Outer diameter: 3.628" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Galvanized assembly is great for marine use. Trailerhub fits 2,000-lb idler axles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and galvanized lug nuts included. 5-1/2" Hub flange.Features: Marine-grade trailerhub assembly fits idler axles Includes bearings, races, grease seal, grease cap, and zinc-coated lug nuts Zinc plating has a 500-hour salt spray rating Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications Specs: Application: 2,000-lb axles Hub flange diameter: 5-1/2" Works with 10" - 12" wheels Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 2" long Weight capacity: 1,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" Corrosion Resistance for Marine Use This trailerhub assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer.
When you hear grinding at the wheel, see oil leaking from the hub, or notice play in the tire, it might be time for repairs. This idler hub fits 16,000-lb heavy-duty axles and uses an oil bath system for visible lubrication monitoring under load.Highlights Oil Bath Service Visibility: Monitor lubrication without teardown in an oil bath hub assembly. 16,000-lb Axle Rating: Built for heavy-duty axles to keep loads supported under work use. Direct Part Number Match: Swaps in as a direct replacement for hub-and-drum assembly 008-401-72. 8 on 275mm Wheel Pattern: Matches 8 on 275mm bolt pattern for wheel mounting consistency. 22mm Wheel Stud Sizing: Uses 22mm wheel bolt diameter to match the wheel hardware requirement.
Your idler hub is worn and the wheel has play in it. You pull it off and install this hub with a 5 on 4-1/2 bolt pattern for a 3,500 lb axle. It slides on, and the pre-greased bearings get the wheel spinning smooth again.Supports 13" to 15" Wheels: Compatible with common trailerwheel sizes. Features to Know About How Do I Know This Hub Will Fit My Trailer? Designed for standard 3,500 lb axle spindles, this hub works with many utility and cargo trailers.
Straight trailer idler axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 12" wheels. ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, EZ-Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Limited 2-year warranty Specs: Weight capacity: 2,200 lbs Hub-face-to-hub-face length: 72" Spring-center-to-spring-center length: 58" Hub bolt pattern: 5 on 4-1/2" Hub flange diameter: 5-1/2" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" Wheel size: 8" - 12" Bearing, Race, and Seal Information Bearings Inner bearing: L44649 Outer bearing: L44649 Races Inner race: L44610 Outer race: L44610 Seal: 10-60 Inner diameter: 1.50" Outer diameter: 1.987" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Straight trailer axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 15" wheels. ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, EZ-Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Limited 2-year warranty Specs: Weight capacity: 2,000 lbs Hub-face-to-hub-face length: 72" Spring-center-to-spring-center length: 58" Hub bolt pattern: 5 on 4-1/2" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" 6-1/2" Diameter hub flange, for use with 13" - 15" wheels Bearing, Race, and Seal Information Bearings Inner bearing: L44649 Outer bearing: L44649 Races Inner race: L44610 Outer race: L44610 Seal: 10-60 Inner diameter: 1.50" Outer diameter: 1.987" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Straight idler trailer axle measures 60" from hub face to hub face and 48" from spring center to spring center. Includes idler hubs -with bearings, races, and seals- for 13" to 15" wheels. ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, EZ-Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Limited 2-year warranty Specs: Weight capacity: 2,200 lbs Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Hub bolt pattern: 5 on 4-1/2" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" Wheel size: 13" - 15" Bearing, Race, and Seal Information Bearings Inner bearing: L44649 Outer bearing: L44649 Races Inner race: L44610 Outer race: L44610 Seal: 10-60 Inner diameter: 1.50" Outer diameter: 1.987" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Straight trailer axle measures 60" from hub face to hub face and 48" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 12" wheels. ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, EZ-Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Limited 2-year warranty Specs: Weight capacity: 2,000 lbs Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Hub bolt pattern: 4 on 4" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" Wheel size: 8" - 12" Bearing, Race, and Seal Information Bearings Inner bearing: L44649 Outer bearing: L44649 Races Inner race: L44610 Outer race: L44610 Seal: 10-60 Inner diameter: 1.50" Outer diameter: 1.987" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Straight trailer axle measures 60" from hub face to hub face and 48" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 12" wheels. ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, EZ-Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Limited 2-year warranty Specs: Weight capacity: 2,200 lbs Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Hub bolt pattern: 5 on 4-1/2" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" Wheel size: 8" - 12" Bearing, Race, and Seal Information Bearings Inner bearing: L44649 Outer bearing: L44649 Races Inner race: L44610 Outer race: L44610 Seal: 10-60 Inner diameter: 1.50" Outer diameter: 1.987" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle measures 60" from hub face to hub face and 48" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 12" to 15" wheels.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight spindle - no drop Standard grease application Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Limited 2-year warranty Specs: Weight capacity: 2,000 lbs Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Hub bolt pattern: 5 on 4-1/2" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" Wheel size: 12" - 15" Bearing, Race, and Seal Information Bearings Inner bearing: L44649 Outer bearing: L44649 Races Inner race: L44610 Outer race: L44610 Seal: 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 10" wheels.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight spindle - no drop Standard grease application Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Limited 2-year warranty Specs: Weight capacity: 2,000 lbs Hub-face-to-hub-face length: 72" Spring-center-to-spring-center length: 58" Hub bolt pattern: 5 on 4-1/2" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" Wheel size: 8" - 10" Bearing, Race, and Seal Information Bearings Inner bearing: L44649 Inner bearing: L44649 Races Inner race: L44610 Outer race: L44610 Seal: 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 12" to 15" wheels.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight spindle - no drop Standard grease application Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Limited 2-year warranty Specs: Weight capacity: 2,000 lbs Hub-face-to-hub-face length: 72" Spring-center-to-spring-center length: 58" Hub bolt pattern: 5 on 4-1/2" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" Wheel size: 12" - 15" Bearing, Race, and Seal Information Bearings Inner bearing: L44649 Outer bearing: L44649 Races Inner race: L44610 Outer race: L44610 Seal: 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle measures 60" from hub face to hub face and 48" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 8" to 10" wheels.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight spindle - no drop Standard grease application Spring seats and spindles are welded on Cast iron idler hubs are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Limited 2-year warranty Specs: Weight capacity: 2,000 lbs Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Bolt pattern: 5 on 4-1/2" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Grease cap outer diameter: 1.986" Wheel stud diameter: 1/2" Wheel size: 8" - 10" Bearing, Race, and Seal Information Bearings Inner bearing: L44649 Inner bearing: L44649 Races Inner race: L44610 Outer race: L44610 Seal: 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Filters
