Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 4 Precise, motorized jacks can be operated by either the included touchpad. ... Use this system if there will be 20' or less between the center of the landing gear footpad and the center of the rear jack footpad. If your setup requires more than 20' between the jacks, use the 6-point Ground Control system (LC675817) instead. Leveling your fifth-wheel RV has never been easier thanks to the Ground Control 3.0 electricleveling system.
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 6 Precise, motorized jacks can be operated by either the included touchpad or a Bluetooth compatible app on your smartphone.Use this system if there will be 20' or more between the center of the landing gear footpad and the center of the rear jack footpad. If your setup requires less than 20' between the jacks, use the 4-point Ground Control system (LC358590) instead. Leveling your fifth-wheel RV has never been easier thanks to the Ground Control 3.0 electricleveling system.
If your RV is already prepped for the Ground Control 3.0 system, this kit has everything you will need to automatically level and stabilize it, without unneeded, duplicate components.Use this system if there will be 20' or more between the center of the landing gear footpad and the center of the rear jack footpad. If your setup requires less than 20' between the jacks, use the 4-point Ground Control system (LC358590) instead. Leveling your fifth-wheel RV has never been easier thanks to the Ground Control 3.0 electricleveling system.
Automatically level and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorized jacks can be operated by the included control panel or via your smart device (if RV has Wi-Fi and factory-installed OneControl system).The Ground Control TT automatic electric trailer jack system provides the easiest, most efficient way to level your trailer. With automatic leveling, you don't need to go through the trial and error of referencing levels and manipulating jacks one at a time.
Replaces the brake assembly for your Lippert Power Gear electric RV levelingjack. Works with all Lippert Power Gear electric RV levelingjacks.Features: Replaces the brake assembly for your Lippert Power Gear electric RV levelingjack Works with all Lippert Power Gear electric RV levelingjacks Fits: All Lippert Power Gear electric RV levelingjacks
Replaces the boot and metal clamp for your Lippert Power Gear electric RV levelingjack. Works with all Lippert Power Gear electric RV levelingjacks.Features: Replaces the boot and metal clamp for your Lippert Power Gear electric RV levelingjack Works with all Lippert Power Gear electric RV levelingjacks Fits: All Lippert Power Gear electric RV levelingjacks
As long as your C-Jack part number is 404488, then the Replacement C-Jack for Lippert Electric Ground Control TT #LC404488 will work for you. The pictured jack may have been from 2018 but it is the correct part number for your Lipper Electric Ground…
Hey Robin! I'm sorry to say that none of the Advent Air AC models are able to replace a Dometic Duo Therm like yours. What I recommend is completely replacing the system. Not only will this allow you to avoid any compatibility issues, it will…
Atwood is no longer making parts as they were bought out. Lippert Components did buy the landing gear portion of that company and they are giving you the correct replacement part number for your system and we do not carry that part. I can definitely…
I reached out to Lippert and your 346005 control module was replaced with the Replacement Control Module for Lippert Ground Control 3.0 Leveling System #LC85ED. To use this control module they said you must have the Control Panel #LC421484 otherwise…
I looked up the a few pictures of the interior of your 2015 Honda Pilot, and I recommend mounting the control knob of the Redarc Tow-Pro Liberty #RED24FR to one of the blank switch knockouts on the left side of the steering wheel, similar to this…
The brake controller I recommend for a 2020 Honda Pilot is the Curt Echo Mobile Trailer Brake Controller part #C51180. The Curt Echo is a plug and play option so there will be no permanent modifications to the vehicle. It uses a device you are…
Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…
Thanks for all that good info, and what you have is the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010, which you can replace with a Lippert set with a high speed motor on you RV, though you will need to have new brackets welded on. The…
Yes, you will want to use a sliding fifth wheel hitch for your 2023 GMC Sierra 2500 that has a standard sized bed. Using a sliding hitch will prevent the nose of your 5th wheel trailer from coming in contact with the cab or your bed when making…
I recommend going with the Furrion RV Tankless Water Heater #FR98SR over the Fogatti RV Tankless Water Heater #LSB64FR because it has a higher heating capacity (up to 60,000 Btu as opposed to the Fogatti 41,800 Btu) and it comes with a 2 year…
Hey Erik, so what you've got left apart from the Roadmaster Falcon #RM-522 that you already have is a base plate, a braking system, and a wiring kit. For a base plate kit, I recommend going with the Blue Ox Base Plate Kit #BX1110 using the Blue…
The thickness of the Camco Cam Locks is measured from the bottom of the threads to the cam. I attached a diagram showing where we measure the thickness for your reference. Based on the photo of your Cam Lock, the Camco Cam Lock #CAM44323 will replace…
Replaces the right-hand side electriclevelingjack motor for your Power Gear electricleveling system (383548, 383768, 383772, 383778, or 383796).Features: Replaces the right-hand side electriclevelingjack motor for your Power Gear electricleveling system (383548, 383768, 383772, 383778, or 383796)
Replaces the left side electriclevelingjack motor for your Power Gear electricleveling system (383548, 383768, 383772, 383778, or 383796).Features: Replaces the electriclevelingjack motor for your Power Gear electricleveling system (383548, 383768, 383772, 383778, or 383796) Driver-side application
Replaces the manual override cover with level for your Stromberg Carlson electricjack (JET-3755).Features: Replaces the manual override cover with level for your Stromberg Carlson electricjack (JET-3755) Quantity: 1 screw-on manual override cover with built-in bubble level
Replaces the white screw-on cap with level for your Stromberg Carlson electric tongue jack.Features: Replaces the white screw-on cap with level for your Stromberg Carlson electric A-frame tongue jack Works with 2500 lb jack (JET-2500) Works with 3500 lb jacks (JET-3555 and JET-3755) Works with 5000 lb jack (JET-5000) Fits: Stromberg Carlson 2500 lb electric tongue jack: JET-2500 Stromberg Carlson 3500 lb electric tongue jack: JET-3555 and JET-3755 Stromberg Carlson 5000 lb electric tongue jack: JET-5000
Replaces the 3/8" diameter snapper pin for Lippert Components Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Used to attach the foot pad to jack.Features: Replaces the snapper pin for Lippert Components Ground Control 3.0 electricleveling system (LC358590 or LC675817) Used to attach foot pad to jack
Perfect for fifth wheels and toy haulers with Lippert leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. ... Note: You will need to measure your jacks to confirm compatibility, as the foot size/shape of the jacks on your leveling system can vary from model to model and year to year.
Replaces the control module for Lippert Components Ground Control 3.0 automatic leveling system (LC358590). Mounts in a compartment under the coach.Features: Replaces the control module for Lippert Components Ground Control 3.0 electricleveling system (LC358590) Mounts in a compartment under the coach Connects directly to your 12-volt battery with wiring harness Other wiring harnesses connect the jack motors, rear sensor, and the touchpad to the control module
Replaces 1 rear left leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.Features: Replacement left rear leg for your Lippert Ground Control 3.0 electricleveling system (LC358590 or LC675817) Leg includes the mounting bracket needed for installation Snapper pin to attach footpad (LC225598) is sold separately Specs: Total lift: 12-1/2" Overall height: Retracted: 24-1/2" Extended: 36-3/4" Capacity: 5,000 lbs
Replaces the front jack tube for your Lippert Components Ground Control 3.0 automatic leveling system (LC358590 or LC675817).Features: Replaces the front jack tube for your Lippert Components Ground Control 3.0 electricleveling system (LC358590 or LC675817) Weld tabs included Mounting brackets and motor are sold separately Quantity: 1 front jack tube
These 2 leveling scissor jacks with a combined 15,000-lb capacity each will keep your RV level and stable. Each adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers Remains steady on soft surfaces because of wide bow-tie base Bolts or welds on Includes 2 steel jacks and 1 crank handle Specs: Capacity: 7,500 lbs per jack Extended height: 30" Retracted (collapsed) height: 4" Collapsed length: 32-1/2" 1-Year limited warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
This leveling scissor jack with a 5,000-lb capacity will keep your RV level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
This leveling scissor jack with a 5,000-lb capacity will keep your RV level and stable. It adjusts from 5" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.Features: Replaces a lost or damaged 3-position wiring harness for your Lippert Level-Up hydraulic leveling system Measures 25' long to provide ample reach for installation Restores electrical connections to keep your leveling system functioning properly Designed for a secure fit with Lippert Level-Up systems Reliable construction withstands RV travel demands Quick and simple installation Fits: Fits all Lippert Level-Up Hydraulic Leveling Systems
Filters
