Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength. The built-in grease zerk allows for effortless greasing. ... Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs.
This dual-pin, two-speed jack from RAM delivers 20,000 lb of static support and 12,000 lb of lift. Its spring-return drop leg, 4-3/8" tubing, and 9" x 9" footplate provide stable, heavy-duty performance.Features: Two-speed gearbox makes raising or lowering heavy loads faster and easier Dual-pin, spring-return drop leg lets you quickly set height without cranking Heavy-duty square tubing provides stability under maximum load Large footplate keeps the jack steady and drains water away Grease fittings and brass bushings reduce wear and simplify maintenance Black powder coat finish protects against rust and corrosion Handle assembly included for smooth sidewind operation Specs: Jack type: two-speed, sidewind Static capacity: 20,000 lb Lift capacity: 12,000 lb Drop leg: spring-return, dual-pin Outer tube: 4-3/8" square Lift: 13-1/2" Drop leg adjustment: 13" Total adjustment: 26-1/2" Footplate: 9" x 9" with drainage Finish: black powder coat Mount: weld-on
This heavy-duty jack leg is ready to get back on the job site! Front-facing plunger pin is easy to reach when using the adjustable drop leg. Lifts 5 tons supported by a strong carbon steel frame. Made in the USA.Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs.
Bulldog Winch Accessories and Parts - BDW20284 Lighted on/off 3-pin rocker switch with red color bar and barriers Momentary rocker switch for use with horns or starters Small color bar lights when switch is off IP68 Extreme water resistance For automotive or marine use Use in-cab or outdoors Power draw: 20 amps at 12v DC Dimensions: 15/16" wide x 1-15/16" high x 1-15/16" deep
Weld this female pipe mount to your trailer's frame to provide the mounting point for the male pipe on your swivel jack. Fits 3-1/4" male pipes with a 7/8" pin hole.Features: Provides trailer-side attachment point for your pipe-mount swivel jack Welds onto your trailer frame to provide the attachment point for your pipe-mount swivel jack Allows you to swing your jack down for use and up for travel Female pipe pairs with male mount on your jack Specs: Fits: 3-1/4" male pipe mount Diameter: Outer: 4" Inner: 3-1/4" Pin hole diameter: 7/8" Length: Longer edge to center of pin hole: 1-5/8" Shorter edge to center of pin hole: 1-1/4" Overall: 2-7/8"
Momentary 4-pin rocker switch with barriers for use with horns or starters. For automotive or marine use in-cab or outdoors.Features: Momentary 4-pin rocker switch with barriers for use with horns or starters For automotive or marine use in-cab or outdoors IP68 Extreme water resistance Specs: Dimensions: 15/16" wide x 1-15/16" high x 1-15/16" deep Power draw: 20 amps at 12v DC
Replaces the female pipe mount on your etrailer or Ram pipe-mount swivel trailer jack. 5/8" Pin hole diameter.Features: Replaces the female pipe on your etrailer or Ram pipe-mount swivel jack Specs: Diameter: Outer: 3" Inner: 2-1/2" Pin hole: 5/8" Length: Longer edge to center of pin hole: 1-5/8" Shorter edge to center of pin hole: 7/8" Depth: 2-1/2"
Heavy-duty winch with 6-hp, permanent magnet motor lets you quickly and safely pull large vehicles onto your trailer. Low-profile winch fits easily into most custom boxes and cabinets. Includes wireless remote and mounting plate with hardware.This provides more speed than traditional worm gear drives or 1- or 2-stage planetary gear trains. An internal spring-loaded pin locks it into or out of gear when the handle is turned. The gearbox can be rotated in 30-degree increments to 12 different positions to ensure that you can easily access the clutch handle no matter where the winch is mounted.
Heavy-duty winch with 6-hp, permanent magnet motor lets you quickly and safely pull large vehicles onto your trailer. Low-profile winch fits easily into most custom boxes and cabinets. Includes wireless remote and mounting plate with hardware.This provides more speed than traditional worm gear drives or 1- or 2-stage planetary gear trains. An internal spring-loaded pin locks it into or out of gear when the handle is turned. The gearbox can be rotated in 30-degree increments to 12 different positions to ensure that you can easily access the clutch handle no matter where the winch is mounted.
Standard-duty winch with 1.87-hp, permanent magnet motor lets you quickly and safely pull vehicles onto your trailer. Low-profile winch fits easily into most custom boxes and cabinets. Includes hand-held remote and mounting plate with hardware.This provides more speed than traditional worm gear drives or 1- or 2-stage planetary gear trains. An internal spring-loaded pin locks it into or out of gear when the handle is turned. The gearbox can be rotated in 30-degree increments to 12 different positions to ensure that you can easily access the clutch handle no matter where the winch is mounted.
Standard-duty winch with 5.2-hp, permanent magnet motor lets you quickly and safely pull vehicles onto your trailer. Low-profile winch fits easily into most custom boxes and cabinets. Includes hand-held remote and mounting plate with hardware.This provides more speed than traditional worm gear drives or 1- or 2-stage planetary gear trains. An internal spring-loaded pin locks it into or out of gear when the handle is turned. The gearbox can be rotated in 30-degree increments to 12 different positions to ensure that you can easily access the clutch handle no matter where the winch is mounted.
Standard-duty winch with 5.2-hp, permanent magnet motor lets you quickly and safely pull vehicles onto your trailer. Low-profile winch fits easily into most custom boxes and cabinets. Includes hand-held remote and mounting plate with hardware.This provides more speed than traditional worm gear drives or 1- or 2-stage planetary gear trains. An internal spring-loaded pin locks it into or out of gear when the handle is turned. The gearbox can be rotated in 30-degree increments to 12 different positions to ensure that you can easily access the clutch handle no matter where the winch is mounted.
Compact, light-duty utility winch with 1.0-hp, permanent magnet motor pulls lightweight objects short distances. Built-in plate lets you mount winch to any stable surface. Includes 50' wire rope and hand-held remote with integrated relay switch.To release the clutch for free-spooling simply pull out the hard plastic knob and rotate it 90 degrees so that the pins on the shaft rest against the catch. To reengage the clutch, rotate the knob 90 degrees and push it back in. The clutch is driven by a single-stage planetary gear train.
Surge-type actuator features a corrosion-resistant composite master cylinder and a primed finish. Bulldog Collar-Lok coupler provides tight, solid connection with hitch ball and is great for heavy-duty towing. Welds onto a 50-degree A-frame trailer.Features: Hydraulic actuator activates trailer's brakes when tow vehicle slows or stops Bulldog Collar-Lok coupler fits tightly around hitch ball for secure connection Heavy-duty design is great for utility, livestock, cargo, and construction trailers Pin-style fastener holds collar in place around base of hinged ball socket Composite master cylinder is durable and efficient Glass-reinforced nylon construction resists rust and corrosion Large reservoir provides increased capacity for brake fluid Automotive-style diaphragm cap creates completely enclosed system to help prevent contamination of fluid Acetal copolymer lining provides smooth operation as actuator telescopes in and out Breakaway included Heavy-duty steel construction Primed finish Weld-on installation Straight tube Made in the USA Specs: Application: 50-degree A-frame trailers with hydraulic drum brakes Ball size: 2-5/16" Gross towing weight: 8,000 lbs Maximum tongue weight: 800 lbs Model number: DA9550 1-Year warranty Note: Because this actuator does not include a reverse lockout, it is recommended that you equip your trailer with free-backing brakes so that you can drive in reverse without the actuator triggering your trailer's brakes.
Surge-type actuator features a corrosion-resistant composite master cylinder and a primed finish. Bulldog Collar-Lok coupler provides tight, solid connection with hitch ball and is great for heavy-duty towing. Welds onto a 50-degree A-frame trailer.Features: Hydraulic actuator activates trailer's brakes when tow vehicle slows or stops Bulldog Collar-Lok coupler fits tightly around hitch ball for secure connection Heavy-duty design is great for utility, livestock, cargo, and construction trailers Pin-style fastener holds collar in place around base of hinged ball socket Composite master cylinder is durable and efficient Glass-reinforced nylon construction resists rust and corrosion Large reservoir provides increased capacity for brake fluid Automotive-style diaphragm cap creates completely enclosed system to help prevent contamination of fluid Acetal copolymer lining provides smooth operation as actuator telescopes in and out Built-in drop helps you match tow vehicle height Breakaway included Heavy-duty steel construction Primed finish Weld-on installation Made in the USA Specs: Application: 50-degree A-frame trailers with hydraulic drum brakes Ball size: 2" Gross towing weight: 8,000 lbs Drop: 4" Model number: DA91 1-Year warranty Note: Because this actuator does not include a reverse lockout, it is recommended that you equip your trailer with free-backing brakes so that you can drive in reverse without the actuator triggering your trailer's brakes.
Light-duty winch with 1.2-hp, permanent magnet motor and dynamic brake lets you quickly and safely recover a stuck ATV. Sealed motor, gearbox, and contactor protect winch from the elements. Handlebar-mounted rocker switch included.To release the clutch for free-spooling simply pull out the hard plastic knob and rotate it 90 degrees so that the pins on the shaft rest against the catch. To reengage the clutch, rotate the knob 90 degrees and push it back in. The clutch is driven by a single-stage planetary gear train.
Light-duty winch with 1-hp, permanent magnet motor and dynamic brake lets you quickly and safely recover a stuck ATV. Sealed motor, gearbox, and contactor protect winch from the elements. Handlebar-mounted rocker switch included.To release the clutch for free-spooling simply pull out the hard plastic knob and rotate it 90 degrees so that the pins on the shaft rest against the catch. To reengage the clutch, rotate the knob 90 degrees and push it back in. The clutch is driven by a single-stage planetary gear train.
Light-duty winch with 1.2-hp, permanent magnet motor and dynamic brake lets you quickly and safely recover a stuck ATV. Sealed motor, gearbox, and contactor protect winch from the elements. Handlebar-mounted rocker switch included.To release the clutch for free-spooling simply pull out the hard plastic knob and rotate it 90 degrees so that the pins on the shaft rest against the catch. To reengage the clutch, rotate the knob 90 degrees and push it back in. The clutch is driven by a single-stage planetary gear train.
Surge-type actuator features a corrosion-resistant composite master cylinder and a primed finish. Bulldog Collar-Lok coupler provides tight, solid connection with hitch ball and is great for heavy-duty towing. Welds onto a 50-degree A-frame trailer.Features: Activates your trailer's drum brakes when tow vehicle slows or stops - no brake controller needed Bulldog Collar-Lok coupler fits tightly around hitch ball for secure connection Heavy-duty design is great for utility, livestock, cargo, and construction trailers Pin-style fastener holds collar in place around base of hinged ball socket Composite master cylinder is durable and efficient Glass-reinforced nylon construction resists rust and corrosion Large reservoir provides increased capacity for brake fluid Automotive-style diaphragm cap creates completely enclosed system to help prevent contamination of fluid Acetal copolymer lining provides smooth operation as actuator telescopes in and out Built-in drop helps you match tow vehicle height Breakaway included Constructed of heavy-duty steel Primed finish Weld-on installation Made in the USA Specs: Application: 50-degree A-frame trailers with hydraulic drum brakes Ball size: 2-5/16" Gross towing weight: 8,000 lbs Maximum tongue weight: 800 lbs Drop: 4" Model number: DA91 1-Year warranty Note: Because this actuator does not include a reverse lockout, it is recommended that you equip your trailer with free-backing brakes so that you can drive in reverse without the actuator triggering your trailer's brakes.
Filters
