This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features an 8-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boat trailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubber roller delivers long-lasting performance Made in the USA Specs: Roller length: 8" Shaft diameter: 5/8" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 6" apart on center Typically installed upright on the rear and middle crossmembers of a boat trailer, keel roller panel bracket assemblies help to keep the boat moving while it is being loaded and to stabilize the keel.
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. Its 8-inch, yellow TPR spool roller won't mark your boat, and the galvanized steel panel bracket has slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boat trailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Yellow, thermal-plasticized rubber (TPR) roller delivers superior long-lasting performance TPR material is non-marking, stronger than rubber and softer than polyurethane Made in the USA Specs: Roller length: 8" Shaft diameter: 5/8" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 6" apart on center Typically installed upright on the rear and middle crossmembers of a boat trailer, keel roller panel bracket assemblies help to keep the boat moving while it is being loaded and to stabilize the keel.
Replace the standard rubber keel roller on your boat trailer with this blue thermoplastic rubber version from Yates. TPR material is stronger than rubber and softer than polyurethane, and it won't leave marks on your boat.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Made in USA Specs: Application: 8" wide bracket with 5/8" diameter shaft Dimensions: 7-3/4" long x 3-3/8" diameter YR800Y Yates Keel Roller for Boat Trailers - TPR - 8" Long - 5/8" Shaft - Blue
8-7/8" Long x 5/8" diameter steel shaft for 8" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 8" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 8-7/8" Diameter: 5/8"
This 2-1/2" diameter roller replaces one of your boat trailer's side guide rollers. Heavy-duty rubber construction is strong and durable.Features: Replaces 1 side guide roller on your boat trailer Eases loading and unloading of boat Mounts along the side of your trailer to better guide your boat into place Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 5/8" diameter shaft Dimensions: 12" long x 2-1/2" diameter 12243-5 Yates 12" Molded Side Guide Roller - Black Rubber
Replace the worn-out roller on your boat trailer with this heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 12" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Made in the USA Specs: Application: 12" wide bracket with 5/8" diameter shaft Dimensions: 11-3/4" long x 3-3/8" diameter 12000 Yates 12" Heavy-Duty Keel Roller - Black Rubber
13" Long x 5/8" diameter steel shaft for 12" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 12" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 13" Diameter: 5/8"
11" Long x 5/8" diameter steel shaft for 10" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 10" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 11" Diameter: 5/8"
6-1/4" Long x 5/8" diameter steel shaft for 5" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 5" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 6-1/4" Diameter: 5/8"
5-1/4" Long x 5/8" diameter steel shaft for 4" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 cap nuts for mounting.Features: Roller shaft accommodates a roller on your boat trailer Constructed of sturdy, zinc-plated steel Attaches with 2 end cap nuts (included) Made in the USA Specs: Application: 4" rollers Quantity: 1 shaft and 2 cap nuts Shaft length: 5-1/4" Diameter: 5/8"
This 3-1/2" diameter x 1-1/4" wide endcap mounts to a keel roller, spool roller or bow roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers sturdy support.Features: Attaches to the end of the roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra support and guiding capability Works with keel, spool and bow rollers Constructed of heavy-duty rubber Made in USA Specs: Application: keel, spool or bow roller on 5/8" diameter shaft Dimensions: 3-1/2" diameter x 1-1/4" wide Endcaps easily install on the same brackets that your keel, spool or bow rollers are mounted to.
This one-piece panel bracket braces an 8" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports an 8" roller on your boat trailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 8" rollers Accepts an 8-7/8" long x 5/8" diameter roller shaft Overall dimensions: 8-1/8" long x 7-3/4" wide x 3-1/2" tall Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 6" apart on center Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
This 2-1/2" diameter x 2-1/2" wide endcap mounts to a side guide roller on your boat trailer to provide additional surface area for improved boat-to-roller contact. Heavy-duty rubber delivers lasting effectiveness.Features: Attaches to the end of the side guide roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra guiding capability Constructed of heavy-duty rubber Made in USA Specs: Application: side guide roller on 5/8" outer diameter shaft Inner diameter: 0.670 Dimensions: 2-1/2" diameter x 2-1/2" wide Endcaps easily install on the same brackets that your side guide rollers are mounted to.
This 3-1/8" diameter x 1" wide endcap mounts to a keel roller, spool roller or bow roller on your boat trailer for improved boat-to-roller contact. ... Features: Attaches to the end of the roller on your boat trailer to increase roller surface area Provides additional contact between roller and boat for extra support and guiding capability Works with keel, spool and bow rollers Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Made in USA Specs: Application: keel, spool or bow roller on 5/8" diameter shaft Overall dimensions: 3-1/8" diameter x 1-1/8" wide Endcaps easily install on the same brackets that your keel, spool or bow rollers are mounted to.
3" Wide wobble rollers replace the worn-out rollers on your boat trailer's roller bunk. Ribbing provides extra traction for slippery hulls. Includes bushings for 3/4" or 1-1/8" diameter shaft on roller bunk.Features: Replaces 4 wobble rollers on the roller bunk assembly of your boat trailer Direct replacement for OEM rollers on LoadRite, Sealion, Venture, Calkins, Hawkeye, Karavan, and King Marine boat trailers Supports your boat, eases loading and unloading, and absorbs road shock during trailering Provides additional traction thanks to ribbed design Great for slick or slimy hulls Removable bushings ensure that rollers fit 3/4" and 1-1/8" diameter shafts Constructed of sturdy rubber with polypropylene plastic hubs Made in the USA Specs: Fits 3/4" and 1-1/8" roller shafts Roller dimensions: 5" diameter x 3" wide Inside hub width: 1-1/2"
Replace the worn-out roller on your boat trailer with this heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 8" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Made in USA Specs: Application: 8" wide bracket with 5/8" diameter shaft Dimensions: 7-3/4" long x 3-3/8" diameter 8000 Yates 8" Heavy-Duty Keel Roller - Black Rubber
Replace the worn-out roller on your boat trailer with this large-diameter, heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 8" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Includes heavy-duty nylon bushings Made in USA Specs: Application: 8" wide bracket with 5/8" diameter shaft Dimensions: 7-3/4" long x 3-1/2" diameter 8244-105EC Yates 8" Super Heavy-Duty Keel Roller - Black Rubber
Replace the keel roller on your boat trailer with this PVC roller. Durable polyvinyl chloride roller supports the keel of your boat as it sits on your trailer. ... Features: PVC keel roller replaces 1 worn or damaged keel roller on your boat trailer Eases loading and unloading of your boat Supports the keel of your boat as it rests on your trailer Absorbs road shock while your boat is being towed Polyvinyl chloride (PVC) construction is durable, non-marring, and corrosion resistant Stronger and longer lasting than rubber Won't leave scratches, scuffs, or marks on your boat's hull Works great in freshwater and saltwater Amber color Specs: Application: 8" wide bracket with 5/8" diameter shaft Dimensions: 7-7/8" long x 3-3/8" diameter PVC Construction Polyvinyl chloride (PVC) is a sturdy material that is great for use on marine trailers.
Replace the standard rubber keel roller on your boat trailer with this thermoplastic rubber version from Yates. TPR material is stronger than rubber and softer than polyurethane, and it won't leave marks on your boat.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Made in the USA Specs: Application: 8" wide bracket with 5/8" diameter shaft Dimensions: 7-3/4" long x 3-1/16" diameter
Replace the worn-out roller on your boat trailer with this large-diameter, heavy-duty rubber one. This keel roller functions as a direct replacement for rollers that fit standard 5-3/8" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 keel roller on your boat trailer Eases loading and unloading of boat Supports bottom of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Includes heavy-duty nylon bushings Made in USA Specs: Application: 5-1/2" wide bracket with 5/8" diameter shaft Dimensions: 5-3/8" long x 3-3/8" overall diameter 1-3/8" Diameter of white bushing 11/16" Diameter of opening for shaft
Replace the bow roller on your boat trailer with this PVC roller. Durable polyvinyl chloride roller supports the flat front of your skiff without snagging the boat lip. ... Features: PVC bow roller replaces 1 worn or damaged bow roller on your skiff boat trailer Eases loading and unloading of your boat Supports the flat front of your skiff without getting caught on the boat's lip Absorbs road shock while your boat is being towed Polyvinyl chloride (PVC) construction is durable, non-marring, and corrosion resistant Stronger and longer lasting than rubber Won't leave scratches, scuffs, or marks on your boat's hull Works great in freshwater and saltwater Amber color Specs: Application: bracket with 5/8" diameter shaft Dimensions: 8-3/8" diameter x 1-1/2" thick Quantity: 1 roller PVC Construction Polyvinyl chloride (PVC) is a sturdy material that is great for use on marine trailers.
Replace the worn-out spool roller on your boat trailer with this heavy-duty rubber one. Functions as a direct replacement for rollers that fit standard 8" wide brackets with a 5/8" diameter shaft.Features: Replaces 1 spool roller on your boat trailer Eases loading and unloading of boat Supports keel of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of heavy-duty rubber Made in USA Specs: Application: 8" wide bracket with 5/8" diameter shaft Dimensions: 7-5/8" long x 3" diameter 8302-5 Yates 8" Spool Roller - Black Rubber
3" Wide wobble roller replaces 1 worn-out roller on your boat trailer's roller bunk. Heavy-duty rubber construction delivers sturdy support. Ribbing provides extra traction for slippery hulls.Features: Replaces 1 wobble or rocker roller on the roller bunk assembly of your boat trailer Provides additional traction thanks to ribbed design Great for slick or slimy hulls Constructed of heavy-duty rubber Made in the USA Specs: Application: roller bunk with 5/8" diameter shaft Diameter of center hole measures slightly under 3/4" to fit 5/8" shaft Dimensions: 4-3/8" diameter x 3" wide 343R-5P Yates 4-3/8" Rib Rocker Roller - Black Rubber
... The keel won't center and you're tired from a day on the water. This bracket fixes the angle, steadies the roller, and helps guide your boat home without the struggle.Versatile Fit: Works with 5/8" roller shafts and 5" spool rollers. Corrosion-Resistant Steel: Galvanized finish handles splash, spray, and salt. Reliable Build: Made in the USA with marine use in mind.
Filters
