If your straight trailer tongue takes up too much room in your garage or storage unit, this kit will help. Once installed, it lets your trailer fold back onto itself, freeing up to 6' of space.. Fits Straight Trailer Tongues: Made to install on trailers with 3" wide x5" tall tongue frames. Made for Harsh Environments: Galvanized steel is slow to rust or corrode, even in saltwater
If your straight trailer tongue takes up too much room in your garage or storage unit, this kit will help. Once installed, it lets your trailer fold back onto itself, freeing up to 6' of space.. Fits Straight Trailer Tongues: Installs on tongues measuring 3" wide x5" tall. Sleek Powder-Coat Finish: Black powder coating adds a sharp look to your trailer while protecting against chips
... hydraulic disc brakes and 3x5 straight tongue.: 2" Mounting: 3" x5" straight tongue Capacity: 7,500 lbs 2-Year limited warranty When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward
Mount your round, 3" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included. required for mounting axle to leaf spring sold separately Specs: Axle diameter: 3" Typical 5,200-lb to 7,000-lb axle Spring width: 1-3/4" Thread dimensions: 2" long x 1/2"-20 Dimensions
U-Bolt Kits
Dexter
Camper
Car Hauler
Utility Trailer
5200 lbs - 7000 lbs
Round Axle - 3 Inch
7 Inch Long
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
Suspension kit includes equalizers and hardware for attaching 4 leaf springs to the hangers on your trailer's frame. Works with 33" axle spacing. springs Axle spacing: 33" Equalizer dimensions: Distance between outer shackle bolt holes (center on center): 5-3/4" Distance between hanger bolt hole and shackle bolt hole (center on center
Use with actuators or standard couplers to create a foldaway tongue up to 48" long so that your trailer can be stored in even the smallest garage. Unique offset design guarantees superior performance. Corrosion-resistant, Z-max 600 zinc finish Mounting hardware, pivot bolt and pivot pin and clip included Not for use on aluminum trailer frames Specs: Application: 3" x5" trailer tongue Trailer tongue
5-5/16" Waterproof light with a built-in reflector displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and works with 3-prong plugs. 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 5-5/16" long x3-7/16" tall x 2-5/16" thick Diodes: 14 Power draw
3" Wide wobble roller replaces 1 worn-out roller on your boat trailer's roller bunk. Heavy-duty rubber construction delivers sturdy support. Ribbing provides extra traction for slippery ... heavy-duty rubber Made in the USA Specs: Application: roller bunk with 5/8" diameter shaft Diameter of center hole measures slightly under 3/4" to fit 5/8" shaft Dimensions: 5" diameter x
Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 5-1/2" Long U-bolts (2) U-Bolt plates for 1-3/4" springs (8) 7/16"-20 Hex nuts Spring seats required for mounting axle to
5-1/4" Long U-bolt works with a U-bolt plate and another U-bolt to help secure your 2" wide, square trailer axle to its leaf springs. Sturdy, zinc-plated steel resists corrosion.: Application: 2" wide axles Bolt size: 1/2"-13 Length: 5-1/4" Inner width: 2-1/8" Quantity: 1 U-bolt
8-3/8" x5-3/4" Low-profile, LED tail light displays brake, tail, and turn signals on your RV. It comes with a built-in reflector. It mounts on the surface of the motorhome and hardwires ... Polycarbonate lens and housing Surface mount Included gasket creates weathertight seal Hardware not included 3-Wire harness hardwires to RV Specs: Dimensions: 8-3/8" long x5-3/4" tall x 7/8" thick
8-5/8" Incandescent RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the RV, with a lens that snaps on so it's easy to replace the bulb. It ... side) Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" thick Power draw at 12.8 volts: Stop light: 2.65 amps Tail light: 2.1 amps 3-Year warranty
Rubber bushing with steel sleeve is designed for use with trailer suspension systems. Insert bushing into the eye of your leaf spring to ensure proper sizing for suspension bolts.: Inner diameter: 5/8" Outer diameter: 1-3/8" Length: 2-3/16"
8-5/8" x3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with ... (RVSTLB0060) sold separately Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" deep Height with license plate bracket: 5" Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.34
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. It wires to your RV with the ... : 8-5/8" long x3-3/16" tall x 2-1/4" thick Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
8-5/8" Incandescent RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the RV, with a lens that snaps on so it's easy to replace the bulb. It ... : passenger's side (right-hand side) Driver side: RVST61 (sold separately) Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" thick Bulb type: 1157 bulb Power draw at 12.8 volts: Brake light
6-1/2" x 2-1/4" Oval. Waterproof incandescent trailer light functions as a back-up light. Shock proof socket protects bulb. Recessed mount with included grommet. Industry standard 2-prong ... protects bulb from damage Durable polycarbonate lens and housing Clear lens Recessed mount with included grommet Industry standard 2-prong plug Specs: Overall dimensions: 7-5/8" long x3-3/8" tall
8-5/8" x3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with ... (RVSTL0060) sold separately Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" deep Height with license plate bracket: 5" Power draw at 12.8 volts: Stop/turn signal light: 0.34 amps Tail
8-5/8" RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the motorhome and wires to the RV. side (right-hand side) Driver's-side light: RVSTL0061 (sold separately) Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" thick Power draw at 12.8 volts: Stop/turn signal light
Energy-efficient LEDs in this waterproof dome light are vibration-resistant when driving over rough roads to the campsite. Wires to a light switch in your RV so you can easily turn the light on and off when you need to do the dishes after dinner. dimensions: 5-3/4" long x 2-3/4" wide x 11/16" deep Voltage: 12V DC Power draw at 12.8 volts: 0.33 amps Light output: Raw lumens: 400 lumens Effective lumens: 227lumens Number of LEDs: 9
Filters
