Perfect for heavy-duty marine and other off-the-beaten-path trailer applications, this rugged-looking swivel jack has an extra-wide wheel for great stability and turns 360 degrees to make it easy to maneuver your trailer. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly Pull-pin handle lets you position jack quickly Protective handle cover houses the pull-pin and swivel components Makes it easy to move your trailer in tight spaces Extra-wide caster wheel turns a full 360 degrees Resists rust and corrosion, inside and out Outer tubing has a matte black powder coat to protect from corrosion and harsh UV rays Inner tubing has a premium TUFFPLATE zinc finish with a 500-hour salt spray rating Drain holes at bottom of inner post prevent water buildup Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Complements your rugged trailer with an edgy, off-road look of its own Bolts around your trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailers frames up to 3" tall x 4" wide Lift capacity: 1,700 lbs Bracket height (from bottom of wheel to top hole of bracket): Retracted: 18-7/16" Extended: 30-7/16" Lift: 12" Pull pin diameter: 1/2" Outer tube diameter: 2-1/2" Handle radius: 6-1/8" Wheel dimensions: 8" diameter x3-5/16" wide 3-Year limited warranty Protective Cover to House the Pull-Pin and Swivel Components There really isn't much to pull-pin on a typical swivel jack.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 5" Maximum rise: 2-1/2" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,700 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,000 lbs - 1,700 lbs Overall height: 10-1/2" Total from center of 5/8" pin hole with included ball mount installed: 16-3/4" Total length from center of 5/8" pin hole without ball mount installed: 13-1/2" Distance from adjustment pin hole to 2nd hitch receiver pin hole: 11-1/4" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 4 stacked 2" receivers that can accept almost any hitch-mounted accessory.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 2-1/2" Maximum rise: 5" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,200 lbs - 1,700 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,700 lbs Overall height: 10-1/2" Total from center of 5/8" pin hole with included ball mount installed: 17" Total length from center of 5/8" pin hole without ball mount installed: 13-3/4" Distance from adjustment pin hole to 2nd hitch receiver pin hole: 11-5/8" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 4 stacked 2" receivers that can accept almost any hitch-mounted accessory.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Single-receiver cross tube installs under your OEM hitch to provide 2 receivers Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver opening: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the 2 receivers that you get with the SuperHitch, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Single-receiver cross tube installs under your OEM hitch to provide 2 receivers Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver opening: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the 2 receivers that you get with the SuperHitch, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Single-receiver cross tube installs under your OEM hitch to provide 2 receivers Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver opening: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the 2 receivers that you get with the SuperHitch, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 7-1/2" Maximum rise: 2-1/2" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,700 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,200 lbs - 1,700 lbs Overall height: 13-1/4" Total from center of 5/8" pin hole with included ball mount installed: 17" Total length from center of 5/8" pin hole without ball mount installed: 13-3/4" Distance from adjustment pin hole to 2nd hitch receiver pin hole: 11-3/4" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 5 stacked 2" receivers that can accept almost any hitch-mounted accessory.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Install a weight distribution system (sold separately) on your Gen-Y Hitch adjustable ball mount with this adapter. Shank slides into your 2" stacked receivers to provide attachment points for a system head. Secures with included pins and clips.Features: Shank allows you to add a weight distribution system (sold separately) to your Gen-Y Hitch adjustable ball mount with 2" stacked receivers Slide shank into 1 of the stacked receivers of adjustable ball mount and secure with included pins and clips Attach weight distribution head assembly to shank Easily adjust your head assembly 5 Adjustment holes for attaching head assembly Remove and insert shank into higher or lower receiver to get additional rise or drop Durable steel construction Zinc primer and epoxy powder coat resist corrosion Made in the USA Specs: Application: Gen-Y Hitch adjustable ball mounts with 2" x 2" receivers Maximum gross trailer weight: 16,000 lbs Tongue weight capacity: 1,700 lbs Shank width: 2" Adjustment hole dimensions: Holes are spaced 1-1/4" apart on center Adjustment hole diameter: 3/4"
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
If you're tired of turf tires slipping once the ground changes, the K502 Terra Trac gives you better bite, sheds debris, and supports heavier loads, so your equipment stays stable on slopes, turf, dirt, and gravel.Specs: Tire & Fitment: Application: utility and turf equipment (non-highway use only) Tire size: 24 x 12.00-12 Fits rim size: 12" x 8-1/2" Dimensions: Section width: 11.3" Overall diameter (inflated): 23.7" Load & Construction: Load range: B Ply rating: 4 (bias ply) Tube required: no Maximum load: 1,700 lbs at 20 psi
Strap measures 15' long x 2" wide - perfect for most strap-accommodating hand winches. Includes hook and has a break strength of 2,600 lbs.However, it will require a 2-3/4" long x 1/14" diameter bolt (not included). 6148 Hand Winch Strap with Safety Hook - 15' Long x 2" Wide - 2,600 lbs
Replaces a double post knob and bolt for your Hollywood Racks RV Rider bike rack (HR1600 or HR1700). Secures the upright mast to the wheel platform and shank. Includes carriage bolt, 3/8" diameter split washer, and 3/8"-16 knob.
If you have a UTV/ATV, small truck, or work vehicle, a light bar can be your full coverage option at slow speeds. This 6" flood beam from the Rugged line covers a wide spread, pushing bright, stable 3,600 K white light and long term durability.Features: Confidently hit the trail or worksite in low-light conditions with 1,700 raw lumens from 6 OSRAM LEDs Flood spreads wide for highly effective front and side coverage, with some up trail reach Mount this bar on your truck, UTV, snowmobile, or any other work or life toy Despite the compact size, the quality electronics and optic reflectors drive 6,300 K white light Aluminum housing protects and acts as a heatsink Shock and vibration rated, with an impact resistant polycarbonate lens Waterproof up to 3 feet for 30 minutes and can be pressure washed Coated steel mounting bracket and stainless steel hardware included Specs: Quantity: 1 light bar Light dimensions: 1-3/4" tall x 6-5/16" long x 1-1/2" deep Lumens: Raw: 1,700 Effective: 1,500 Color temperature: 6,300 K Wattage: 26 watts Power draw: 2.1 amps at 12V Input voltage: 9V - 30V DC Operating temperature: -40 F to 150 F Input connector: pigtail IP rating: IP69K Limited lifetime warranty
When water starts building faster than you can manage by hand, you need more than a manual pump. Designed for demanding conditions, this bilge pump focuses on durability, efficiency, and consistent performance to move water out fast.Multiple attachment points help accommodate different mounting needs. Specs Performance: Flow rate: 1,700 GPH Maximum current draw: 5.7 amps Electrical: Rated voltage: 12V DC Recommended fuse: 10A Dimensions: Overall size: approx. 3-13/16" wide x 6" tall Construction: Fully submersible design Glass- and mineral-filled polymer housing Stainless steel motor shaft Wiring: Wire length: 36" Tinned and sealed 2-wire connection Warranty: 3-Year
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.Features: Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately) Specially designed to maintain high capacity when used with TorkLift accessories Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time Compatible with industry-standard ball mounts and hitch accessories Truck-camper-friendly TorkLift design Pre-drilled to accept TorkLift camper tie-downs (sold separately) SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability Hardened, reinforced hitch pin holes prevent elongation from wear Bolt-on installation - no welding required Lifetime technical support from the experts at etrailer.com Black powder coat finish resists corrosion Safety chain loops are built in 2 Hitch pins and clips included - hitch locks sold separately Custom fit for your vehicle Made in the USA Specs: Receiver openings: 2" x 2" Rating: Class V Maximum gross trailer weight : 17,000 lbs Maximum GTW when used with weight distribution: 20,000 lbs Maximum tongue weight : 1,700 lbs Maximum TW when used with weight distribution: 2,000 lbs Cross tube dimensions: 3-1/2" x3-1/2" Lifetime warranty With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time.
Filters
