Flat tow brake systems stop working right when power drops. This direct-wire 12V outlet connects to your towed vehicles battery so your braking system stays powered and ready every time you tow.Specs Electrical Voltage: 12V Fuse rating: 15 amps Dimensions Wire length: 120" Connections Connector type: 12V power outlet socket Wire gauge: 14 AWG two-wire Included Components 12V outlet socket Wiring harness In-line fuse holder ATC blade fuse Connectors Shrink tube Mounting screws Warranty 3-Year limited
This kit is designed to bring an additional 12volt power source protected by a 20 amp fuse. This will help protect your towed vehicle's electrical system.
Bulldog Winch Accessories and Parts - BDW20286 12-Volt, 20-amp power socket with cover and 3 mounting brackets Flush mount, under dash, and dash top tent bracket Watertight cap with tether Large contact surfaces for good connection For automotive or marine use Use in-cab or outdoors
Replace the broken 12V power outlet or cigarette lighter port in your vehicle, boat, or RV so you can power your fan or other devices while you're traveling. Rubber cap keeps out dirt and debris when not in use. Fits a 7/8" diameter cutout.Features: 12V power outlet replaces a damaged 12V port in your vehicle, boat, or RV Power your tire inflator, fan, car vac, or other 12V appliance Rubber cap protects against dust and debris when not in use Hardwires to 12-volt power source with built-in spade terminals Metal construction is built to last Specs: Amperage: 10 amps (if using 18-gauge wire) 20 amps (if using 14-gauge wire) Outside diameter: 1" Required cutout : 7/8" diameter
No available 12V outlet for your RVibrake? This kit adds a dedicated power source wired directly to your toads battery, so your portable braking system runs reliably every time you tow.
USB charger fits standard 12-volt outlet in your car, truck, motorcycle, or boat. Current adapts to your device's amperage for safe recharging. Removable weatherproof cap protects ports when not in use. ... Features: USB charger fits a standard 12-volt outlet to charge your devices in your car, truck, or boat 3.3-Amp charger adapts to your device for safe recharging 2 USB ports can be used at the same time or use 1 for USB-C fast charging Luminescent face makes it easy to find port in the dark Specs: Charging amps: 3.3 3-Year limited replacement warranty
Features: Unique oscillating pattern covers both high and low zones Convienent 12-volt adapter plug with 6' cord Includes clamp and plate for permanent mounting W1658 Performance Tool 6" Oscillating Fan 12-Volt - Clamp-On
Keep backseat passengers warm and cozy with this compact, 300-watt heater. Bolt the unit to the floor of your Jeep or other off-road vehicle and wire it into any 12V power source, and it will radiate heat throughout your vehicle.Features: Backseat heater provides extra warmth for your Jeep or other off-road vehicle 300-Watt unit radiates heat quickly and efficiently Easy-to-access toggle switch lets you turn heater on and off Integrated swivel mount allows you to adjust position of unit Simple, universal installation Wires into any 12V power source Bolts securely to vehicle's floor with pre-drilled mounting bracket Specs: Dimensions: 8" tall x 7" wide x 6" deep Power draw: 12volts Current draw: 25 amps Wattage: 300 watts Limited 1-year warranty
Easy-to-use mini inflator fills a standard automotive tire in about 10 minutes. Perfect for topping off car tires and filling up sports equipment. Small size is perfect for transporting and storing out of the way.Features: Miniature tire inflator fills standard tires in approximately 10 minutes Ideal for topping off your tires and filling various inflatables Compact size for easy storage Plugs into your 12-volt accessory outlet Specs: Output pressure: 45 psi Voltage: 12volts Hose length: 4" Power cord length: 9' Mini inflator dimensions: 4-3/4" long x 3-3/4" wide x 2-1/4" tall The compact size of this mini tire inflator makes it simple to transport.
... Supplies gentle heat to your lap or shoulders with 59" x 43" fleece-encased heating pad. Powered from the 12-volt DC outlet in your car.Features: Heated travel blanket is great for use as a seat cover, blanker, or just on your lap for added warmth Keeps you warm while traveling in your car, RV, or boat 3 Heat settings - Low / Medium / High Adjust to your desired temperature - up to 149 degrees F Built-in, automatic 45-minute timer prevents overheating and will not drain your battery Fits 2 people Plush, polar fleece easily folds up in the included storage bag with zipper 94" Power cord plugs into any DC accessory power outlet and can reach any seat in the car Specs: Dimensions: 59" long x 43" wide Input: 12-volt DC Max current: 4.5-amp Rated power: 50-watt In line fuse: 8-amp Power cord: 94" Safety: built-in overload shut off Warranty: 1 year
Mount this compact heater on your dash to quickly defrost windshields and other surfacts. Plugs easily into a 12-volt accessory outlet.Features: 12-Volt heater mounts easily on your dash to defrost your windshield and other surfaces Plugs into a 12-volt accessory outlet 3-Position heat swich allows for different levels of heating Separate switches are used to operate the fan and LED flashlight Handle swings out to use heater as a spot defroster Specs: In-line blade fuse: 15 amps Length: 5-1/2" Thickness (at thickest point): 2-1/4" Width: At widest point: 7-1/8" At narrowest point: 3-5/8" Mounting base: 4-1/8" long x 2-3/8" wide Power cord: 7' 90-Day warranty Note: This is not recommended to be used for more than 20 minutes at a time.
This LED light bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.Features: Displays tail, brake, and turn signals on your towed car so you can tow safely and legally Receives tow vehicle's signals via wireless transmitter Avoids risk of electrical damage to your car Requires no hardwiring or splicing Light bar plugs into 12-volt outlet in your car Transmitter plugs into RV's 7-way Mounts to your vehicle's rear window with a strong suction cup Includes light bar, transmitter and receiver kit, and mounting kit Made in the USA Specs: Universal fit for all vehicles Requires 12-volt accessory outlet Cord length: 11-1/2' Light bar length: 17" Note: If you have to disconnect your vehicle's battery in order to flat tow, use kit DM83FR (sold separately) to get power to your 12-volt outlet.
Add a 12V Auto power port where you need it without splicing wires or leaving loose leads exposed. This OptiMate panel-mount socket creates a sealed, fused, vibration-resistant charging point for trucks, trailers, RVs, and equipment.Keeps The Port Covered When Not In Use: Sealing cap helps protect the socket. Features to know about Create a Permanent 12V Access Point Instead of accessing the battery directly every time you need power, this OptiMate O-46 panel-mount socket lets you install a dedicated 12V connection point on your truck, trailer, RV, or other equipment.
Add a tidy 12V power port where you need it without splicing wires or guessing at connections. This OptiMate panel mount kit gives you a sealed, fused setup ready for trucks, trailers, and other 12V equipment.Specs Electrical Current rating: 10 amps average / 13 amps max Fuse rating: 15 amps Dimensions Socket diameter: 13/16" Cable length: 40" Connections Connector type: 12V panel mount socket with SAE to auto plug Ring terminal size: M6 (1/4") adaptable to M8 (5/16") Construction Mount type: panel mount with sealing cap Operating temperature: down to -40F Included Components O-46 panel mount socket O-22 SAE to auto plug cable Warranty 3-Year limited replacement
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex LED tail lights.A variable voltage tail light (also known as multiplex) uses the same wire for both the brake light and the tail light, sending a 12-volt signal to the brake light and a 9-volt signal to the tail light. This works fine when you're driving, but when you are flat towing, the RV will send a 12-volt signal to both the brake light and tail light, making them the same level of brightness and impossible to distinguish from each other.
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex incandescent tail lights.A variable voltage tail light (also known as multiplex) uses the same wire for both the brake light and the tail light, sending a 12-volt signal to the brake light and a 9-volt signal to the tail light. This works fine when you're driving, but when you are flat towing, the RV will send a 12-volt signal to both the brake light and tail light, making them the same level of brightness and impossible to distinguish from each other.
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex LED tail lights.A variable voltage tail light (also known as multiplex) uses the same wire for both the brake light and the tail light, sending a 12-volt signal to the brake light and a 9-volt signal to the tail light. This works fine when you're driving, but when you are flat towing, the RV will send a 12-volt signal to both the brake light and tail light, making them the same level of brightness and impossible to distinguish from each other.
Replaces the 12-volt DC variable-speed fan motor on your MaxxAir MaxxFan RV roof vent (MA00-04000K, MA00A04301K, MA00A04401K, MA00-04500K, MA00-05100K, MA00-05301K, MA00-06200K, MA00-06401K, MA00-07000K, or MA00-07500K).Features: Replaces the fan motor on your MaxxAir MaxxFan RV roof vent (MA00-04000K, MA00A04301K, MA00A04401K, MA00-04500K, MA00-05100K, MA00-05301K, MA00-06200K, MA00-06401K, MA00-07000K, or MA00-07500K) 12-Volt DC variable-speed motor
Roof vent uses a 115-volt fan to circulate air in your RV's bathroom.Features: Roof vent uses a 115-volt fan to circulate air in your RV's bathroom Side exhaust function Non-lighted design Specs: Rough opening diameter: 8" Duct size: 3" diameter CFM: 50 Power draw: 115 volts
... Bright LEDs mount inside your vehicle's tail light housings, with the wiring out of sight. Includes 7-to-6-wire adapter cable and 6-wire socket.Features: LEDs display your RV's tail, turn, and brake signals on your towed car without tapping into its wiring Avoids risk of damage from electrical feedback Has no effect on your warranty Mounts inside car's tail light housing - requires drilling a 1" hole Shines brighter and more efficiently than incandescent bulbs 7-Way to 6-way adapter cord runs power from the motorhome to the towed car Coiled to prevent dragging and tangling Resistant to the elements with vinyl coating 6-Way socket hardwires to towed car and mounts on front bumper Kit includes: 2 Red bulbs with sockets 4-Wire harness 7-Way to 6-way adapter cable 6-Way socket Butt connectors, zip-ties, wire loom, and installation hardware Made in the USA Specs: Adapter cord length: 8' when extended 16 Gauge Wiring harness length: 27' Light output per bulb: 450 lumens Overall length of bulb: 2-1/2" Length of bulb from flange to top of bulb: 2" Wire loom: Length: 3' Diameter: 1/2" 1-Year limited warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
These lights get turn and brake signals on your towed car without splicing into its wiring. They mount inside your vehicle's tail light housing, with the wiring out of sight. The LEDs are efficient, long-lasting, and bright. 450 Lumens per bulb.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires a 1" diameter hole drilled into the tail light housing Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 red bulbs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome sold separately Made in the USA Specs: Wiring harness length: 27' Light output per bulb: 450 lumens Overall length of bulb: 2-1/2" Length of bulb from flange to top of bulb: 2" Hole required for sockets: 1" diameter Wire loom: Length: 3' Diameter: 1/2" Limited lifetime warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
Need a reliable way to power or charge through a standard 12V socket? This SAE to Auto Plug adapter gives you a solid connection without loose fits or flickering power.Keeps Connections Protected: In-line seal helps block dirt and moisture. Short Cable Keeps Things Tidy: 12" length avoids extra slack. Flexible For Power Or Charging: Use with chargers, accessories, or panel-mounted ports. Features to know about Flexible 12V Power Connection You can use it with an existing factory 12V socket or pair it with the OptiMate Panel Mount Socket (MA84BV - sold separately) to create a dedicated charging/power port.
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch.Mount to roof with #8 screws. Remove screen frame to make electrical connections. Connect to 12-volt DC power source. Replace screen frame. Attach interior garnish piece (sold separately) with #8 screws.
Filters
