Salt Spreaders Specs:
Features:
This gravity-fed tailgate spreader has a powered spinner to help de-ice driveways and small strip mall parking lots. 9" Diameter spinner casts rock salt up to 24'. Tilt hopper down to access the back of your Jeep, SUV, or truck.
Tech Tip:
Hitch tongue weight will determine amount of salt able to be loaded into spreader, based on spreader weight and weight of salt combined.
More Information >Salt Spreaders Specs:
Features:
This gravity-fed tailgate spreader has a powered spinner to help de-ice driveways and small strip mall parking lots. 9" Diameter spinner casts rock salt up to 24'. Tilt hopper down to access the back of your Jeep, SUV, or truck.
Tech Tip:
Hitch tongue weight will determine amount of salt able to be loaded into spreader, based on spreader weight and weight of salt combined.
More Information >Salt Spreaders Specs:
Features:
De-ice driveways and parking lots with this spreader that mounts in the bed of your UTV or 1/2- or 3/4-ton truck. Auger automatically clears clogs. 14" Diameter spinner casts material up to 30' and can be adjusted by the in-cab controller.
More Information >Salt Spreaders Specs:
Features:
De-ice driveways and parking lots with this spreader that mounts in the bed of your UTV or 1/2- or 3/4-ton truck. Auger automatically clears clogs. 14" Diameter spinner casts material up to 30' and can be adjusted by the in-cab controller.
More Information >Videos
for Salt Spreaders
Help Articles
for Salt Spreaders
Expert Answers
for Salt Spreaders
At this time we only know the Replacement Clutch Assembly #3371401150 to work on the following salt spreaders. Air-Flo part number A40032 Henderson part number 51873 Swenson part number 04138-017-00 Hi-Way part number 41719 Meyer part number 61167…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…
view full answer...You only need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236 if your Crosstrek does not already have a 4 pole at the back. If you already have a 4 pole, then you'll just need #ETBC7 and you'll be…
view full answer...To solve your step issue I recommend the MORryde StepAbove Fold-Down Steps for 23-3/4" to 26-1/4" RV Door Frames - 8" Drop Item #MR98RR. This will bolt right onto the bottom portion of the door frame instead of the sides…
view full answer...Hey John, yes the Tekonsha brake controller install harness part #3050-P is correct for your 2023 Nissan Frontier and would be what you would need to install the Prodigy P2 part #90885. This harness has one end that was designed to fit your truck…
view full answer...There are 3 soft TruXedo Tonneau covers for the 2003 Dodge Ram short bed. If you have the TruXport, #TX246601 then the replacement cover only is #TX246601-CVR. If you have the Lo Pro QT #TX546601 then the replacement cover only is #TX546601-CVR. If…
view full answer...We do not offer the Pullrite brand but in my research it does appear to compare to our Demco Hijacker AutoSlide like #DM8550024. Both the B&W and Demco 5th wheel hitches are great for the short bed user. What will make the difference is the…
view full answer...I recommend the Curt T-Connector Vehicle Wiring Harness #CU94FR for your 2022 Hyundai Santa Fe. This will connect to the factory connector that is located on the driver's side rear bumper. The Curt Easy Mount Bracket #C58001 will mount on the…
view full answer...I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…
view full answer...For the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12172, there really isn't a solution other than to use a torque wrench. Without torqing the necessary bolts to the manufacturer specs, you void the warranty and…
view full answer...We sure do! The correct replacement slide out motor for your Power Gear 1510000042 is part #LC88UD on our site.
view full answer...