Result: rm643

Hey Russ, the length of the cable of the Roadmaster Straight Power Cord for Tow Bars with Cable Guides #RM82BQ that you referenced is 78 inches. We have a longer version too with the part #RM72BQ which is 90 inches long. How long do you need?

Hey Cliff, the diameter of the coiled wire rope of the Fastway Breakaway Cable part #FA80-00-2060 that you referenced is 3/16 of an inch. Are you worried it might break?

Hey Jerry, when installing the Roadmaster Brake Lite Relay part #RM-88400 the red wire runs to the running light circuit which is typically a brown wire. In the diagram it's being called the taillight circuit but that's same thing as running…

Hey Kenneth, the first thing you need to flat tow your 2025 Jeep Wrangler is a base plate kit like the Roadmaster part #RM-521453-5 which is a confirmed fit and easy to use. In addition to the base plates, you will also need a compatible tow bar,…

I spoke to my contact at Curt and they informed me that the reason you are hearing the buzzing noise and the third brake light is flashing when using the Vehicle to Vehicle Tail Light Converter part #C56196 is because the green and yellow output…

We have a coiled 7-way to 5-way like with the part #C57271 for a 60 inch long setup. We don't have a 5-way to 5-way though so you'd have to cut off the 7-way and wire in a new 5-way like with the #HM47910.

Hi Vern, We do have a complete snowplow package for your 1999 Chevy Tracker, which is the mounting kit as well as the plow; what you need is the following: - Detail K2 Summit II Snowplow #K2SUMM8826 - Custom Mounting Brackets #K288625 This will give…

It sounds like you are comparing the Hydrastar Vented Marine Electric Over Hydraulic Actuator #HS381-8067 and the Hydrastar Electric Over Hydraulic Actuator #HBA16. The Marine #HS381-8067 features stainless steel hardware, a vented end plate, and a…

For lighting you can use the diode kit, #RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This…

You would need to have an all flat metal bumper on your 1996 Geo Tracker for the Curt tow bar part #C19745 to be able to connect. Since your vehicle does not have that you would need to go a different route. You would need to install a base plate…

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.