Fold-Away Hinge Kit for a Trailer with 2 inch By 3 Inch Tongue
Can I use the folding tounge on a 1500 pound boat trailer and boat which has a 2 X 3 trailer? Or do you have a 2X3 folding tongue. | We do have a fold away coupler that will work on your trailer tongue that is 2 inches by 3 inches and that...
Hinge Kit to Fold 3 inch by 4 inch Trailer Tongue of Pontoon Boat Trailer
I have a pontoon trailer with 3x4 inch tongue, and what are my options? | For a pivoting trailer tongue hinge for a 3 inch by 4 inch the best solution would be to use the weld on hinge kit part # FHDPW350300 which was designed for a 3 inch by...
Replacement Handle for Fulton Winch Model T1602
will this fit T1602 FULTON WINCH? | Yes, the Fulton Replacement Winch Handle # F501110 will fit all single-speed and two-speed Fulton hand winch models that require a handle with an oval opening of 3/8 x 1/2-inch. |
Replacement Fenders Needed with Steps for a Boat Trailer with Step Fenders
Hello. I need 2 fenders for a 13 inch wheel for my boat trailer, but I do not know what to purchase. There is an angled to the wheel, welded to frame, piece of metal, which I think was a step support bracket, in front and behind each wheel....
Mounting Bracket Recommendation to Attach Fulton Jack # F500349 to Trailer
I purchased a Fulton F141132 for my boat trailer, but didnt pay attention to how it was supposed to mount. The Shelby jack I am replacing was attached to a mounting plate that bolted directly to the trailer. The mounting plate center does...
Replacement for ACT-7.5K Actuator on Mastercraft Boat Trailer
We have a single axle Mastercraft boat trailer with disc brakes. It has a Reliable actuator on it that we need to replace. Model # on the actuator says ACT-7.5K. What would be a good replacement? Thanks | For a replacement option I recommend...
Will Fulton Bolt-Thru Swivel Marine Jack Work on 1998 Ranger Trailer
Curious about a replacement trailer jack, think I know which Fulton it is after reading but would like confirmation form pics attached. Well dont see where to attach pics. 1998 Ranger Trail Fulton bolt thru 1200 # capacity | I'm not sure what...
Solution For Plastic Tandem Axle Fenders
Looking for tamdem axle plastic fenders | You can still use the # F008574-2 you were looking at even though they're designed for a single axle trailer. What you will need to do is slightly modify them by cutting the step on one side so they...
Replacement Bolt-Thru Swivel Trailer Jack for 7,000 lb Trailer
The trailer on our boat is stamped with a 7000lb rating. I need to replace the bolt on jack. What weight rating of jack do I need for that kind of tongue weight. Thanks. | For a 7,000 lb trailer you need a jack that can handle at least 1,050...
Fulton F2 Swing Up Trailer Jack With Wheel Having Excessive Play In The Wheel
My jack for my Phoenix 721 trailer has a lot of play in it. I have a video but I cannot send it on here. Thanks | That definately seems like an excessive amount of play in your Fulton F2 Swing-Up Trailer Jack # F1413140334. As these jacks have...
Fulton Magnum Series Dual Wheel Trailer Jack Will Not Raise and Handle Will Not Turn
I have a Fulton Trailer Magnum Series dual wheel trailer jack. The handle will no longer raise the barrel but will only cause the wheels to swivel. If the wheels are secured on the ground, the handle will not move. Appears and sounds like something...
Recommended Tool to Cut Trailer Tongue to Install Fulton Fold-Away Coupler Hinge Kit FHDPB330301
Looking for advice on what tool/saw to use to cut my boat trailer tongue in preparation to install the Fulton Fold-away hinge. Thank You....... | There are several different tools that could be used. A reciprocating saw is a fairly common tool...
Bolt Spacing of Fulton Fas-Lok Coupler
What is the bolt spacing on this part? I need a 3inch spacing. | The mounting holes on the Fulton Fas-Lok Coupler part # F346000301 are spaced 3" apart on center. |
Faster Hand Winch Recommendation for Boat Trailer
The faster the better. I dont put the trailor in the salt water I just use the roller on the drift boat trailer it has the slick uhmw completely on the bottom of the boat. | The Fulton XLT Winch part # F142425 that you referenced would be a...
Replacement Swivel Trailer Jack For 1994 Mastercraft Boat Trailer
I am looking for a trailer hitch to replace the worn out hitch on my 1994 Mastercraft boat trailer. It is currently an Atwood hitch that come on the trailer. I would be happy to send pictures and measurements but cant attach to this website...
Which Trailer Jack Do I Need for My 1994 Mastercraft Boat Trailer
I would like to replace the trailer jack on my 1994 Mastercraft boat trailer without cutting off the current plate welded onto the trailer. The current bolt pattern of the welded on plate is. top center to center is10cm or 4 inches top to bottom...
Why Do Electric Tongue Jacks Not Come with a Caster Wheel
I need to swap out the landing pad on the Ultra-Fab Electric A-Frame Jack - 18inch Lift - 3,500 lbs. with a wheel. I tried the Removable Wheel with Pin for A-Frame Trailer Jacks by Dutton-Lainson Item # DL22539 but its too big for the inner...
Reliability of the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5GX1416
I JUST PURCHASED A C5GX1416 AND BECAME AWARE THAT THE HITCH COUPLER WITH THE SHOCK ABSORBER WAS SEPERATE AND HAD A BOLT ATTACH DESIGAND ALLOWED TO ALLOW FOR HEIGHT ADJUSTMENT. UNAWARE OF THIS DESIGN WHEN MAKING THE PURCHASE FROM ETRAILER, I...
Which Mounting Brackets Can be Used to Attach the Fulton Plastic Fender # F008573 to a Boat Trailer
Hi, I was recently shoping at one of your competitors sites and the have a similar fender. They say it requires two mounting brackets to install. Does this one? I really would like to order here because im looking to buy tires and rims as well....
Winch Recommendation for Four Winns 268 Vista Boat Trailer with Rollers
I am going back to trailering my FourWinns 268 Vista. I believe I am around 6800lbs dry. It sits on a Venture trailer that has rollers. 1 Will the Fulton F2 work for me? 2 Is a strap ok or should I look at a winch with a cable? 3 Do...
6 Foot Long Trailer Safety Chains For Swing Away Hinge
I will be using one of these for a 4’ swing away section. What chains/cables should I get that are long enough? As they’d need to be 4’ plus about a foot to reach the attachment points on the hitch, and maybe plus another foot for slack as well...
Fulton Economy Spare Tire Carrier Compatibility with Angle Iron Frame Trailer
Can you use the Fulton economy spare tire carrier on an angle iron 16ft trailer with ST205-75-R15 tires on 4.75 bolt pattern? I think it will fit but I was wondering about the tire being snugged up against the edge of the angle iron. Will...
Which Fenders do I Need for My 15-Inch Wheels on My Rock Solid Cargo Trailer?
I am look for a fender to fit aRock Solid Cargo Vin No 7H2BE1012LD022362 Tire Size ST 205/75/R15 Just need to purchase the right fender. Please let me know if you have one. | I did some research on your Rock Solid Cargo Trailer, but I could...
Fulton Straight Coupler Installation and Torque Specifications
Hi there, Im in the process of installing a new straight coupler on my galvanized trailer. It requires a 2 inch ball and has a 3 inch tongue/channel. I torqued the two bolts to 55lbs as per this guide which caused the channel to compress...
Filter Your Search
Contact and Help