Replacement Leaf Spring For 4-Leaf Double Eye Spring That Measures 19-1/4" Long.
Do you have a 4 leaf 19 1/4” leaf spring | The closest we have to the 19-1/4" length is the 3-Leaf Double-Eye Spring # SP-072275. It is 18-5/16" from eye center to eye center on the double eye spring. I have included the rest of the measurements...
Slipper Spring Recommendation for 1985 Starcraft Jon Boat Trailer
I need two new slipper springs and u bolts and mounting hardware for 1 1/4 axle. This old trailer has 1 three leaf slipper spring 21in. Long on one side with one u bolt attached diagonally. Yikes! The other side has just a two leaf with same...
Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
Hello, I need a ubolt kit to go with SP-210275 Springs. I have 1.5 square axles. The current square ubolts are 4.5 in length. I started to purchase 115983 and individual ubolts but wanted to know if you offer a kit instead. Thank you. | Hey...
Are 4-Leaf Double-Eye Springs SP210275 Compatible With Bronze Bushings?
The springs on my trailer came with plastic bushings which are now worn out. The spring eyes are nominally 11/16 but the bronze bushings wont fit because the spring eyes are not well machined. I guess with the plastic bushings they didnt need...
Tall Single Axle Hanger Kit and Spacing Required Between Hangers
Hello , Im looking for the tallest hanger kit I can get to raise trailer is the aps4 the right one ? also when mounting this kit to trailer your diagram says A - Distance Between Hangers is 24-7/8inch but other places on your site say to mount...
Higher Capacity 24-5/8 Inch Long Slipper Spring
Hello, I recently received and installed your leaf springs SP-177275 on a chassis for a tear trailer Im building. The shell is feeling heavier that what I had in mind, and I worry that these springs will be overwhelmed. Is there a heavier spring...
Suspension Solution for Trailer with 3,500 lb Axles to Smooth Out Ride Quality
Im looking at putting your SP-210275 springs on a trailer I am building to tow behind my jeep and on some trails. I am using the longer springs for a smoother ride...am I right. Also need to know which hangar kit to purchase. I have a 61/44...
Replacement Slipper Springs 30 Inches From Center Of Spring Eye To End Of Spring
I have a boat trailer with a 5000 lb gross capacity. It has 30 inch slipper springsmeasured while still attached from center of bolt to end of slipper . 3 leafs and 1 3/4 in wide. Do you have springs that would fit my application? Thank you....
Upgrading Dexter Double-Eye Spring 072-020-00
Id like to upgrade the Dexter Leaf Spring 072-020-00 for 4400# axle with the 5 leaf Leaf spring for 6000# axle SP-111275, but notices the eye to eye spacing on the SP-111275 is 25-1/4inch where the Dexter leaf is 24. Will this work okay. I...
Installation Kit for UG54FR Trailer Slipper Spring on a Tandem Axle Trailer
QUESTIONS regarding part # SP-297275 I want four 4 of these for a tandem axle OFF ROAD trailer. The 7/8 inch eye sounds great and should be VERY rugged. see No. 2 below....I want REALLY TOUGH, RUGGED bullet proof suspension 1. Your description...
Double Eye Leaf Springs for Boat Trailer, Stretched Out
My boats leaf springs measure 29 inches but they are broken. I cant find 29 Leaf Springs anywhere. Could they be 27 and maybe stretched out since they are so old? Is that possible? | Before you can pick out a set of leaf springs for your...
Measuring Replacement Slipper Springs For a 2018 Continental Model EC2K12-1200 Canoe/Kayak Trailer
I want to purchase new leaf springs for a 2018 Continental Model EC2K12-1200 Canoe/Kayak Trailer. I am lacking the knowledge of the proper measurement to take of the existing leaf springs. The existing is a 3 leaf spring. GVWR 1500lb Max...
Recommended Hanger Kit For A 6 Leaf 5,300 Pound Double Eye Spring
What hanger kit would I need for double axle if I order the 6 leaf spring double eye spring 5300lb and will these work on a 3 inch axle | The correct hanger kit you would need for The 6-Leaf Double-Eye Spring for 5,300 pound Trailer Axles -...
Hangers to Use with Slipper Springs SP-231275
Im looking to purchase two each of the SP231275 2500 lb. slipper springs and I need a recommendation as to which mounts I need to purchase - this is for a new build trailer. Thank you | Since the springs part # SP-231275 are 2 inches wide the...
Picking Out Trailer Leaf Springs for Trailer with 30 inches between Hangers
Ok lets try this , have a tandam trailer my hanger are 30in apart so what would the correct leaf springs an equalizer, the hanger are welded on so I dont want to remove them | To pick out the correct suspension components for a trailer you want...
Parts Needed To Build A 3,500LB Trailer Frame For a Homemade Tear Drop Trailer
Quick question ,Do you sell trailer frames with axle for the purpose of building a custom tear trailer or can you recommend a web site so I can buy a frame. I will be purchasing. Trailer rims from your web site soon . Thanks! | While we do...
Could Spring Eye-Bolt 166081 be Used with Leaf Spring SP-040275
Hello, Can I use Shackle Bolt with Locknut for Double-Eye Springs - 3 Long, Item 166081 instead of Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2 Long, Item 166079, which will be a bit too long to install 4-Leaf Slipper Spring w/...
What Parts Are Needed To Upgrade My Single 3,500 Pound Axle To Two 2,000 Pound Axles
Im taking out a single 3500 lb axle and putting back 2 - 2000 lb axles on my boat trailer. I know I can piece something together and get it done but I was not sure if you guys could put a package together for me. The current axle is 58inch center...
Slipper Spring Recommendation for Replacing 26 inch Long Spring
I need a Slipper spring 26x13/4inch two leaf, do you carry this size? Thanks | The closest slipper spring to what you are looking for is the part # SP-177275 which is 1-3/4 inches wide, 2 leaves, and an overall length of 30-1/4 inches. This...
27 Long Slipper Springs for a Boat Trailer
Im interested in 3leaf slipper leaf springs. The ones on my boat trailer measure 27 inches though and I am only seeing 24-5/8 on the website and im not sure how to approach this. I can send pictures if needed. Thanks, | We do have 27" slipper...
Replacement Leaf Spring for 7k Axle that is 26-3/4 inches Long
Good afternoon, I have some leaf springs from my trailer and Im trying to figure out which leafs I can use to replace them. The trailer is a 1986 so there isnt much info left on it anywhere. The MAX CAP for the axles is 12,000lbs, they are...
Leaf Spring Recommendation for 1966 Aristocrat Lo-Liner
I have a 1966 Aristocrat Lo-Liner, 13foot trailer, weighs about 2200 lbs. It currently has double eye springs with 10 leaves, and measures 28inch under load, maybe 26inch out of the box. Are any of your products compatible? Thank you | I...
Slipper Springs Close to 24 Inches for Trailer Axle
I need to replace the leaf springs on my Cox Boat Trailer. Measurement is 24 inch eye to eye. Leaf springs are open-end slipper springs, 3 leaf. I also need the mounting kit for the springs to the axle. Axle is 1 1/4 inch diameter. Also...
How to Choose Correct Replacement Slipper Spring for 1981 Daily Boat Trailer
Looking for slider leaf spring for 1981 daily boat trailer. Where can we find one. Length 27 3/8 | By slider leaf spring, I'm assuming you mean a slipper spring. To recommend a suitable replacement, I'll need to know the capacity of the...
Filter Your Search
Contact and Help