Tall Single Axle Hanger Kit and Spacing Required Between Hangers
Updated 04/07/2016 | Published 04/05/2016
Question:
Hello , Im looking for the tallest hanger kit I can get to raise trailer is the aps4 the right one ? also when mounting this kit to trailer your diagram says A - Distance Between Hangers is 24-7/8inch but other places on your site say to mount them A - Distance Between Hangers 25 3/4” also says on redneck trailer site to mount at 25 3/4” . Just double checking . Thanks
asked by: Jeff
Expert Reply:
Of the hanger kits we offer the # APS4 is going to be the tallest that we offer. The hanger spacing you will need to use for the leaf springs like # SP-210275 with the # ASP4 hanger kit is 25-3/4 inches.
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Continue Researching
- Q&A: Torque Rating for U-Bolts # SP01-040 for 2-3/8 inch Diameter Axles
- Q&A: Torque Rating for 2-3/8 Inch Round Trailer U-Bolt part # SP01-040
- Shop: 2-3/8" Round Trailer U-Bolts (Qty 2)
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: 2,000 lb Axle Leaf Spring Recommendation for Trailer that has 26-1/4 inch Long Springs
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Q&A: Recommended Trailer Axle For Haul Master 4x8 Foot Trailer
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Where to Position the Trailer Axle?
- Article: Slipper Spring Trailer Suspension System Review