Recommended Roof Rack And Kayak Carrier For 2015 Chrysler Town And Country
Have a 2015 Chrylser TandC with factory stow and place roof rack. The crossbars are low and seem low quality. Im hauling 2 kayaks and my Malone staxpro2 does not fit factory crossbars. Got anything better and more durable that will screw...
What Vehicles Does the Curt Hitch part # 13364 Fit
what years do the trailer hitch for a 2013 town and country fit | The Curt Hitch part # 13364 that has been confirmed to fit your 2013 Chrysler Town and Country fits the following vehicles: 2012 - 2014 Dodge CV 2012 - 2015 Ram CV 2008 - 2015...
Installation Sockets Needed for 2016 Chrysler Town and Country Draw-Tite Trailer Hitch Installation
2:42 on video What is the socket size for the 3 bolts holding the exhaust system? 4:45 on video When tightening the 5 bolts on the hitch, what is the correct torque setting? 75579 Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit -...
How to Pick Out Replacement Bearings and Seal for a Camper Trailer Hub
Do you know what wheel bearing and grease seals are need for a 2002 Coleman Cheyenne popup camper? Thanks, | To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers...
Is there a Maximum Ceiling Height for the Thule MultiLift Cargo Lift and Storage System
My garage has 13foot ceilings because I have an auto lift. Im trying to find out if this hoist will work with my ceiling height. I didnt see anywhere that this was mentioned. | I checked with Thule and the max length from the mounting surface...
Will Dexter Nev-R-Adjust Electric Brake Assemblies # 23-468 & # 23-469 Work w/ Axeltek Brake Drums
My existing rig has a 3500lb axle with Axletek brakes. The Axeltek drums are 10inch dia x 2.25 wide. Can I replace the Axeltek manual adjusting brakes with the Dexter never adjust and utilize the existing Axeltek brake drums. The existing drums...
Tongue Weight Capacity for Pintle Hook part # C48004
I saw an expert say that the rated tongue weight of a Pintle hitch is 1/4 the total GWR. 5000 LBS Is there a class of hitch that can handle that kind of tongue weight? | For the applications that we normally deal with we don't have a trailer...
Hitch Pin Hole to Bumper Dimension for Curt Hitch part # C12264
on a chrysler 2014 town and country with stow and go, what is the clearance from the center of the hitch hole or pin hole to clear the bumper for a bike rack? For a Curt 1.25inch trailer hitch | The distance from the center of the hitch pin...
50mm Ball and Getting Lights to Work on Altera Strada DL3 Bike Rack on 2016 Chrysler Town & Country
I have brought to the US my beloved Atera Strada DL3 bike rack and need a Euro-style ball mount 50mm - 1 7/8 to fit a 2 trailer hitch receiver. I am not sure though what lift I will need. Please advise. ALSO - if you can suggest the best...
Recommended Hitch Mounted Bike Rack for 2006 Chrysler Town and Country
Is there a 3 bike rack to fit my vehicle that doesnt have the upper arm with foam protector go on the window ??! 2006 Chrysler town and country | All of the trunk mounted 3 bike racks for your 2006 Chrysler Town and Country will have an upper...
Filter Your Search
Contact and Help