Pin Diameter of 3-5/8 Inch Long Trailer Coupler Locks
I need this lock. I need the 3-5/8 length. But I measured the pin that goes into my trailer and its 8mm thick. 1/4 inch might have too much play. Do you have a lock that is that long 3-5/8 but a bit thicker? I want it to fit tight in there...
How to Add Lights to the Roof of a 2016 Jeep Patriot
do you have a Carr light bar and gutter less mounting kit for my 2016jeep patriot? if so can you supply part number? or a generic one? thanks | I do have an option for you but a 2016 Jeep Patriot is not exactly considered to be an off-road...
Can EcoHitch Hidden Front Mount Trailer Hitch Be Used As Recovery Point For 2022 Sprinter 3500
Can this front hitch also be used a recovery point for my 3500 4x4 Sprinter? | I reached out to EcoHitch and found that the # 306-X7352 can be used as a recovery point. It would be a good idea to have something like the MaxxTow Tow Strap Loop...
2 inch Hitch for 2008 Kia Sedona and 1-1/4 inch Hitch Adapter for It
i want to buy 111 class trailer hitch for my 2008 kia sondona van. long base. i have a bike rack. it has a 1 1/4 inch end. i need a part. hitch reducer goes from 2 inch to 1 1/4 inch. do you have the part and do sell that part | For a Class...
Calculating Trailer Hitch Ball Mount Rise/Drop For A Camper Travel Trailer
Im having trouble finding the right hitch for my situation. I have a 2inch class III receiver that measures 15.75inch from the ground to the top of the receiver. The camper I ordered, Im being told that the distance from the ground to the...
Availability of Extra-Long Adjustable Ball Mounts for 2-Inch Hitches
Can this mount be made with a longer shank? Fourteen inches from the pin hole to the center of the ball? Would this change the towing capacity or tongue weight capacity? | The Draw-Tite Adjustable Ball Mount with Sway-Control Tab # 7390 measures...
Distance from Hitch Pin Hole to Tangs on Shank of MaxxTow Clevis Hitch MT70034
What is the length of the shank from the bolt holes to the tangs? | On the MaxxTow clevis hitch # MT70034 it measures 11 inches from the center of the hitch pin holes to the center of the tang holes and approximately 4 inches from the center...
What is Throat Depth of MaxxTow Clevis Hitch
How deep is the throat total and from center of pin hole? | On the MaxxTow 2-Tang Clevis # MT70034 the throat is 4-1/2 inches deep from the end to the weld and 3 inches from the center of the pin hole to the weld. |
Recommended Hitch Lock for Yakima Bike Rack on 2007 Ford Explorer 1-1/4 Inch Receiver
Hi, I have a 2007 ford explorer, 1 1/4 hitch with a Yakima bike rack. Would this fit? Is there a better product you carry, I dont mind paying more for quality. Thank you | The MaxxTow Hitch Receiver Lock for 1-1/4" and 2" Hitches - 2-3/4"...
Clevis Hitch and Pin to Tow an Agricultural Trailer
Questions about a pin hitch, not a hitch pin,inch like the kind you find on agriculture trailers and such. Search after google search just makes me want to scream because it always re-directs to a hitch pin. What is the proper way and equipment...
Recommended Trailer Hitch and 4-Bike Rack for a 2017 Volkswagen Golf Alltrack
Hello. I would like to purchase this Thule 4-bike rack for our new Alltrack: TH9029XT It holds 4 bikes, but is not the swinging kind. Can you please recommend the appropriate hitch for the car? Also, I was considering for camping trips using...
Can the MaxxTow Coupler Latch Lock Be Keyed Alike
If I buy 2 of the ITEM # MT76FR can both locks be keyed the same and both come with 2 keys that are keyed exactly the same? | Since the MaxxTow Coupler Latch Lock for Surge Brake Actuators # MT76FR can not be keyed alike, what you're trying...
Comparing Curt D210 and MaxxTow MT70066 Multipurpose Ball Mounts
Other that the weight capacity what is the difference between mount MT70066 and D210? Is there a dimensional sheet for the D210 so I can compare it to the plan for the MT70066? | The MaxxTow # MT70066 and Curt # D210 multipurpose ball mounts...
E-Bike Rack for 2018 Mercedes Benz Sprinter Compatibility with Tow Dolly
I am purchasing a Tiffin Wayfarer Class C motorhome. I want to dolly toe a 2017 Kia Soul and also carry two 50 pound e- bikes. Is it possible to install a front receiver hitch and carry the two bikes in front with the Hollywood Racks Sport...
How to Carry a Bike Rack and Tow a Trailer that Needs a Large Drop Ball Mount
I was looking to tow a small motorcycle trailer as well as use my bike rack. Looked at your MT70066 But need a much larger drop to keep my trailer level. Is there someone for this? Thanks. | Since you need more drop your best option would...
Hitch Pin/Lock Recommendation for MaxxTow Hitch Adapter MT70033
hi Will the pin and clip for class iii , iv and v ttrailer hitch reciver pin work with the maxx tow trailer hitch adapter to the existing hitch. Bike rack does not use a pin to attach to the 1 1/4inch receiver? | Yes, the hitch pin part # PC3...
Bike Rack for a Camper on a 1982 Ford F-250
1991 Lance camper on 1982 Ford F-250. Your Swagman s63400 tilting rack looked like a possible solution on the back of my rig. It looks like it would tilt enough to allow access to the rear door of the camper. There is also a spare tire on...
Will 12V LED Lights Work with 6V System
Hi, I would like to install these on an old Ferguson 35 Tractor. My question is, will these work on a 6 Volt system? I dont even care if they are half as bright as they would be on a 12 Volt system, as long as they do work. MaxxTow Off-Road...
Can MaxxTow Off-Road Light Bar Be Mounted On A Boat And Withstand Salt Water
Would these lights stand up to a marine/salt environment if they were mounted on a boat? | I talked with my contact at MaxxTow about the MaxxTow Off-Road Light Bar, part # MT80636. They said the body is made of aluminum and the screws are...
Recommended Light Bar For OffShore Saltwater Vessel
Can I mount this in my offshore saltwater vessel and have confidence in its durability. Corrosion, water proof, vibration? Thanks, | The MaxxTow Off-Road Light Bar - LED - 300 Watts - Mixed Beam - 2 Row - 54-1/2" Long, # MT80636, you asked...
How Does MaxxTow Off-Road Light Bar Mount and Will it Fit on Ford F-250
Will this fit a 2003 f250 Ford superduty truck and how does it mount, roof or window? | The mounting holes of the MaxxTow Off-Road Light Bar # MT80636 are spaced 53-13/16 inches apart. As long as the mounting location you're using is wide enough...
Multi Purpose Ball Mount With Tallest Receiver
is the MT70066 the tallest option for the accessory piece? looking to get higher mount options to accommodate existing platform bike rack. | The only other ball mount like the # MT70066 we offer is the # D210 from Curt. The receiver on this...
Is the Curt Multipurpose Ball Mount Available with a Longer Shank
I like this product D210 does it exist the same thing but the bottom part a bit longer | How much longer do you need? The distance from the center of the hitch pin hole to the center of the hitch ball hole on the Curt Multipurpose Ball Mount...
What is the Measurement for MaxxTow # MT0066 From the Center of the Pin Hole to the Receiver Opening
Can you tell me the distance between the center of the pin hole and the beginning of the accessory receiver tube? I dont know if there is enough clearance between the accessory tube and my bumper when installed in my hitch receiver. | In the...
Filter Your Search
Contact and Help