Distance from Hitch Pin Hole to Tangs on Shank of MaxxTow Clevis Hitch MT70034
Updated 11/23/2016 | Published 11/22/2016
Question:
What is the length of the shank from the bolt holes to the tangs?
asked by: Bob F
0
Expert Reply:
On the MaxxTow clevis hitch # MT70034 it measures 11 inches from the center of the hitch pin holes to the center of the tang holes and approximately 4 inches from the center of the pin holes to where the tangs are welded to the shank.
There is 2 inches of space between the tangs and from the centers of the tang holes back to the shank it is 3 inches.
expert reply by:
Michael H
0
click to enlarge
click to enlarge
Product Page this Question was Asked From
MaxxTow 2-Tang Clevis for 2" Trailer Hitches - 1" Diameter Hole - 5,000 lbs
- Clevis Hitch
- Clevis Mount
- 2 Inch Hitch Mount
- 5000 lbs GTW
- 1 Inch Diameter
- Standard Shank
- MaxxTow
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Distance Between Tangs of the MaxxTow 2-Tang Clevis # MT70034
- Shop: Flint Hill Goods 2-Tang Clevis for 2" Hitch - 1" Hole - 5K
- Shop: MaxxTow 2-Tang Clevis for 2" Trailer Hitches - 1" Diameter Hole - 5,000 lbs
- Q&A: Can 14-Ply Tire Be Installed on Wheel with Current 10-Ply Tire
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Trailer Wiring Diagrams
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: 7 Way Connector for 2019 Ford F-150 without Factory Towing Package
- Q&A: Parts Needed To Add Hopkins 7/4 Pole Connector To a 2020 Ford F-150 With Factory 4-Way
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: 7-Way Female to 7-Way Female Adapter Recommendation
- Article: Best Bike Racks for Electric Bikes