Hitch for 1952 Chevy 3100 Pickup Truck
MY 52 CHEVY PICKUP 3100 IS 46inch WIDE FRAME. DO YOU HAVE A HITCH TO FIT THAT? | The only hitch that would work for you is a weld-on such as the Curt # 15903. This is a universal hitch that is a Class V with a 2" receiver and works with frames...
Recommended Gooseneck Hitch for a 1953 Chevy 6400 Dually
Hello, I have a 1953 Chevy 6400 dually i.e., the 2 ton version - GVWR plate has 16,000 lbs.. Between the left and right frame at the rear axle I have 35.5 between the frame rails and it is flat - very, very similar to the 2024 Chevy 4500. I...
Will Dextar Conventional Steel Wheels Fit on a Vintage Truck
I know that these rims are for trailers, but will they work on a 1954 3100 Advance Design Pickup with a 6 on 5.5 bolt pattern? | The Dexstar 15" Conventional Steel Wheel, # AM20514, are basically the same wheels that were used on vintage 1940's...
Is Larger Fender Required When Replacing 5.30-12 Tires W/ 175/80D13 Tires On Karavan Boat Trailer?
My 2005 Karavan Trailer Came With 12inch Rims And A 530-12 Hi Speed Tire Over The Years With All The Pot Holes And Bad Roads In California I Have Busted Axle Hubs, And Broken Well Maintained Bearings. I Switched My Spindles Over From 1inch...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
1947-1953 Chevrolet Advance Design Pickup 3600 8 Lug Wheel
It is well known on many forums that you all have a Dexstar Black steel rims that is a perfect fit for 8 lug vintage pick ups. Any chance I could get a part number? | I believe the wheel that they are refering to is the Dexstar Conventional...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Solution for Trailer Hitch Receiver on 1952 Chevrolet 3100
Do you sell a bolt on Class III hitch for a 1952 Chevy 3100 truck advance design? | I do have a solution, but there are no custom-fit bolt-on hitches for your 1952 Chevy 3100. What you can use is a universal hitch like the # 41990-07. This...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Overall Length of Bristol Double RV Waste Valves # 34466ND14AAR
Hello Could you please provide me with the outside to outside over all length, hub to hub. Thank You | The Bristol Double RV Waste Valves # 34466ND14AAR is about 9" long outside to outside. Attached is a photo showing this as well as a review...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit
Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...
Will the Dexstar Conventional Steel Wheel Part # AM20766 Work with a Tire Tube
Will the Dexstar # AM20766 accept a tube required with the various tube type wide white wall bias ply tires? | I spoke with my contact at Dexstar and they informed me that you should have no trouble using the Dexstar Conventional Steel Wheel...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit
I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...
Does Demco Hijacker Autoslide Fifth Wheel Hitch Require Grease Maintenance
Does the pin head need to be lobed anywhere like the mechanism where the pin slides in | I attached a picture that I took from the install instructions for the Demco Hijacker part # DM8550034 that you referenced that shows all of the components...
Replacement Exterior Folding Handrail for 2015 Grand Design 385TH Toy Hauler
we have a 2015 grand design momentum 385th toy hauler. will this fit where the one that is on there now looking at just taking it off and replaceing it with yours? it looks the same as ours, yours is just larger. It is mounted on the left...
Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch
Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...
Winch Mount Recommendation for 2013 Polaris RZR-4 XP 900
What winch mount will work for my 2013 rzr xp 4 900? | We have the Bulldog Winch Mount part # BDW15167 which is a confirmed fit for your 2013 Polaris RXR-4 XP 900. You could use it with the part # BDW15001. |
Will a Roof Rack from a 2015 Volkswagen Golf Fit a 2008 Volkswagen Rabbit
Im looking to buy a second-hand roof rack for a good price for my 2008 VW Rabbit. The rack Im looking at is a craigslist ad for a 2015 VW Golf. Would this rack be compatible with my rabbit? | The 2008 VW Rabbit and the 2015 VW Golf do not use...
Wheel Net Recommendation for a Polaris RZR with 27x9R-14 Front Tires and 27x11R-14 Rear Tires
I have a 2012 RZR XP. It has 27-9R-14 in the front and 27-11R-14 in rear for tires. I have put the E-TRACK system on my trailer. I want to know if there is a tire strap that would work. | For your tires, I recommend going with the Erickson Wheel...
Roof Rack Recommendation for a 2009 Volkswagen Rabbit 3-Door Hatchback
Will the Sport Rack SR1010 fit my VW Rabbit 3 Door? | The SportRack roof rack # SR1010 is not listed as a fit for the 2009 Volkswagen Rabbit 3-door but we do have several roof racks that will fit. I have included a link to them for you. The...
Filter Your Search
Contact and Help